SYNCO XTalk XPro Wireless Intercom Headset (Xpro5 Five Users) Instruction Manual

הקדמה

This manual provides detailed instructions for the setup, operation, and maintenance of your SYNCO XTalk XPro Wireless Intercom Headset (Xpro5 Five Users). Please read this guide thoroughly to ensure optimal performance and longevity of your device. The SYNCO XTalk XPro series features enhanced signal reception, advanced Acoustic Echo Cancellation (AEC) technology, and a MasterFree Algorithm for flexible team communication.

וואָס איז אין די קעסטל

The SYNCO XTalk XPro5 package includes the following components:

• 5 x SYNCO XTalk Xpro Headsets
• 3 x Charging Stations
• 5 x ריטשאַרדזשאַבאַל ליטהיום יאָן באַטעריעס
• 3 קס וסב-C טשאַרדזשינג קאַבלעס
• 5 x מיקראָפאָן ווינטשילדס
• 5 x One-Ear Foam Cushions
• 1 x סטאָרידזש באַג

פֿאַר אַ וויזועלע גייד צו די פּאַקעט אינהאַלט, ביטע זען די אַנבאָקסינג ווידעא אונטן.

סעטאַפּ

Follow these steps to set up your SYNCO XTalk XPro headsets:

1. טשאַרדזשינג באַטעריז: Ensure all Lithium Ion batteries are fully charged using the provided charging stations.
2. אַרייַנלייגן באַטעריז: Open the battery compartment on each headset and insert a charged battery.
3. Attach Mic Windshield: Place the mic windshield onto the microphone boom arm for improved audio clarity.
4. מאַכט אויף: Locate the power toggle switch on the headset. Push the switch upwards to power on the headset. The headset is pre-paired from the factory (except XPro1) and ready to use. To ensure successful auto-reconnect, turn on the headsets in the sequence of Master → Level 1.
5. מאַכט אַוועק: Push the power toggle switch downwards to power off the headset.

אַפּערייטינג ינסטראַקשאַנז

The SYNCO XTalk XPro headsets are designed for intuitive team communication. Here are key operating features:

• מאַסטערפריי אַלגעריטם: The system intelligently designates a master headset, allowing any unit to function as the master. This ensures continuous communication even if a master headset is lost or runs out of battery.
• פֿאַרבעסערטע סיגנאַל אָפּנאַם: An additional antenna design provides more stable communication over distances up to 500m (1,640ft) Line of Sight (LOS).
• AEC AI Technology: Active Acoustic Echo Cancellation (AEC) spanning 150Hz to 7kHz eliminates echoes, reverberation, and ambient noise, ensuring clear voice recognition in noisy environments.
• איין-קנעפל ווײַט-אויסשטעל-שטילער: The master headset can instantly mute all remote headsets, useful for managing conversations.
• בוסט מאָדע: Enable intelligent spectrum switching with a click of a button to enhance communication quality.
• פאַקטיש-צייט מאָניטאָרינג: Utilize the 3.5mm jack for real-time audio monitoring from devices like cameras and recorders, allowing seamless communication while monitoring.

פּערינג העאַדסעץ

The SYNCO XTalk XPro headsets are designed for easy pairing. For initial setup or re-pairing, use the SYNCO EasyGo software.

1. Download EasyGo: Ensure you have the latest version of SYNCO EasyGo software, firmware, and voice packs from the official SYNCO webפּלאַץ.
2. פֿאַרבינדן כעדסעט: Connect one headset to your computer using the provided USB-C data cable.
3. מאַכט אויף כעדסעט: Turn on the headset. If the connection status in EasyGo shows 'Not Connected', try reversing the cable on the headset end and reconnecting.
4. Select Firmware & Voice Pack: In EasyGo, select the appropriate firmware (e.g., X5-BP LOW for 5 users) and voice pack.
5. Initiate Firmware Update: For the first-time firmware update of an X series headset, long-press the '+' and '-' buttons on the headset simultaneously until you hear two beeps, then a third beep. Release the '+' button first, then the '-' button, and immediately click 'Install' in EasyGo.
6. Restart Headset: After successful installation, unplug the cable and restart the headset. Repeat this process for all headsets.
7. פּאָרינג פּראָצעס: Once all headsets are updated, go to the 'Pairing' tab in EasyGo. Select the quantity of headsets (e.g., 5 for Xpro5). Click 'Start'. EasyGo will guide you to connect and power on headsets in the sequence of Master, Level 1, and Level 2.

Firmware Update

Regular firmware updates ensure your SYNCO XTalk XPro headsets have the latest features and performance improvements. Use the SYNCO EasyGo software for this process.

1. Download Updates: Obtain the latest firmware and voice pack files from the official SYNCO webפּלאַץ.
2. פֿאַרבינדן כעדסעט: Connect one headset to your computer using the USB-C data cable.
3. Open EasyGo: Launch the SYNCO EasyGo software.
4. Select Firmware & Voice Pack: In the 'Install' tab, select the correct firmware file (e.g., X9_MAX_V2.0.5 for XMax) and the corresponding voice pack.
5. Install Update: Click 'Install' to begin the firmware update. Follow any on-screen prompts.
6. Restart Headset: After the installation is complete, unplug the data cable and restart the headset.
7. Repeat for all headsets: Perform this update process for each headset in your system.

וישאַלט

Proper maintenance ensures the longevity and performance of your headsets:

• רייניקונג: Use a soft, dry cloth to clean the headset surfaces. Avoid harsh chemicals or abrasive materials.
• סטאָרידזש: Store headsets in the provided storage bag in a cool, dry place when not in use.
• באַטערי זאָרגן: Fully charge batteries before long-term storage. Avoid extreme temperatures.

טראָובלעשאָאָטינג

אויב איר טרעפט פּראָבלעמען, פּרוּווט די געוויינטלעכע טראָובלעשווטינג טריט:

• קיין קלאַנג/אינטערמיטענטע פֿאַרבינדונג: Ensure headsets are fully charged and within range. Check pairing status via EasyGo.
• נעבעך אַודיאָ קוואַליטעט: Verify mic windshields are properly installed. Check for environmental interference.
• Headset Not Powering On: Ensure battery is correctly inserted and charged.
• פירמוואַרע אַפּדייט ישוז: Ensure the data cable is securely connected and try reversing it. Confirm the correct firmware version is selected in EasyGo.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

For warranty information and technical support, please visit the official SYNCO webזייטל אדער קאנטאקט זייער קאסטומער סערוויס. האלט אייער קויף קוויטל פאר גאראנטיע טענות.