SYNCO P1SL Wireless Microphone System User Manual

הקדמה

Thank you for choosing the SYNCO P1SL Wireless Microphone System. This manual provides detailed instructions for the setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

פּעקל אינהאַלט

• SYNCO P1SL Transmitter (TX)
• SYNCO P1SL Receiver (RX) with Lightning Connector
• טשאַרדזשינג קאַסע
• Mic Windshield x 1
• Charging cable x 1 (USB-C)

פּראָדוקט איבערview

The SYNCO P1SL is a compact wireless microphone system designed for mobile content creation, live streaming, vlogging, and interviews. It features 2.4GHz wireless transmission, one-touch noise cancellation, and a portable charging case.

Figure 1: SYNCO P1SL Wireless Microphone System components and typical usage.

קאַמפּאָונאַנץ:

• טראַנסמיטער (טקס): The microphone unit worn by the speaker. It captures audio and transmits it wirelessly.
• ופנעמער (רקס): The unit that plugs into your iPhone or iPad. It receives audio from the TX.
• טשאַרדזשינג קאַסע: Stores and charges both the TX and RX units.

Figure 2: Compact and lightweight design of the SYNCO P1SL.

סעטאַפּ גייד

1. טשאַרדזשינג די מיטל

Before initial use, ensure both the Transmitter (TX), Receiver (RX), and the Charging Case are fully charged. Use the provided USB-C charging cable to charge the case. The TX and RX units charge automatically when placed inside the charging case.

• A 10-minute charge provides approximately 45 minutes of use for the TX/RX.
• A full charge of the TX/RX offers up to 5 hours of recording time.
• The charging case provides two additional full charges, extending total usage time to approximately 15 hours.

Figure 3: Charging the SYNCO P1SL system and battery life indicators.

2. Pairing the Transmitter and Receiver

The SYNCO P1SL system is designed for automatic pairing. Simply extract the TX and RX units from the charging case. They will automatically attempt to pair with each other. If manual pairing is required:

1. Place both the TX and RX units into the charging case.
2. נאָענט די טשאַרדזשינג פאַל.
3. Open the charging case and extract the units. They should automatically pair.
4. If pairing does not occur, press and hold the pairing button on the charging case for 3 seconds.

Figure 4: Automatic pairing for seamless recording.

3. קאַנעקטינג צו דיין מיטל

The RX unit is equipped with a Lightning connector, making it compatible with iPhones and iPads.

1. Plug the RX unit directly into the Lightning port of your iPhone or iPad.
2. Ensure the connection is secure. Your device should recognize the external microphone automatically.
3. The system is plug-and-play; no additional apps or drivers are typically required.

Figure 5: Connecting the receiver to a compatible device.

אַפּערייטינג ינסטראַקשאַנז

1. מאַכט אויף / אויסגעלאשן

The TX and RX units power on automatically when removed from the charging case and power off when returned to the case.

2. ראַש קאַנסאַליישאַן

The SYNCO P1SL features one-touch noise reduction technology to minimize background noise and enhance voice clarity.

• Locate the noise cancellation button on the TX unit.
• Press the button once to activate or deactivate noise cancellation.
• The indicator lights on the TX will change to confirm the status.

Figure 6: Activating one-click noise cancellation.

3. באַנד קאָנטראָל

The microphone offers five levels of volume adjustment to suit different recording environments and voice types.

• Use the dedicated volume control button on the TX unit to cycle through the five volume levels.
• Adjust the volume to achieve optimal audio input without distortion.

Figure 7: Adjusting microphone volume levels.

4. רעאַל-צייט מאָניטאָרינג

The RX unit features a Type-C port that allows for real-time audio monitoring and simultaneous phone charging.

• Connect headphones to the Type-C port on the RX unit to monitor audio during recording.
• This port can also be used to charge your phone while the RX is connected, ensuring extended recording sessions.

Figure 8: Real-time monitoring via indicator lights.

Figure 9: Charging your device while streaming.

5. ינדיקאַטאָר ליגהץ

The TX, RX, and charging case feature dynamic light strips that indicate battery status, charging status, vocal effect, and pairing status. Refer to the quick start guide for specific light patterns and their meanings.

6. Using the Mic Windshield

Attach the provided mic windshield to the TX unit when recording outdoors or in windy conditions to reduce unwanted wind noise and improve audio clarity.

Figure 10: Enhanced noise isolation with mic windshield.

7. הויך-פידעליטיע אַודיאָ

The SYNCO P1SL delivers high-fidelity audio with a 48KHz sample rate and 24-bit depth, ensuring clear and detailed sound capture.

Figure 11: High-fidelity 48KHz 24-bit audio quality.

Figure 12: Delivering crystal clear sound with optimal frequency response.

8. Omnidirectional Pickup

Equipped with a 6mm high-sensitivity condenser mic, the P1SL offers 360° omnidirectional sound pickup, minimizing voice distortion and signal loss.

Figure 13: Omnidirectional sound pickup for clear audio.

9. טראַנסמיסיע ראַנגע

The system provides a stable 2.4 GHz wireless transmission, allowing for recording distances of up to 492ft (150m) in obstacle-free environments.

Figure 14: Extended wireless transmission range of 492ft/150m.

10. מולטי-סצענע אַפּליקאַציע

The SYNCO P1SL is versatile and suitable for various applications, including vlogging, podcasts, YouTube videos, live streaming, interviews, meetings, and online teaching.

Figure 15: Designed for multi-scene application.

וישאַלט

• רייניקונג: Use a soft, dry cloth to clean the microphone units and charging case. Avoid using liquids or abrasive cleaners.
• סטאָרידזש: האַלט די סיסטעם אין איר טשאַרדזשינג קעסטל אין אַ קיל, טרוקן אָרט ווען נישט אין באַנוץ.
• באַטערי זאָרגן: כדי צו פארלענגערן די לעבן פון די באַטעריעס, זאָלט איר זיי נישט אָפט אויסלאָדן. לאָדט זיי אָפט אויף, אפילו אויב זיי ווערן נישט קעסיידער גענוצט.
• האַנדלינג: באַהאַנדלט די אַפּאַראַטן מיט פֿאָרזיכט צו פֿאַרמייַדן שאָדן פֿון פֿאַלן אָדער קלאַפּן.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

SYNCO products are designed for reliability and performance. For warranty information and technical support, please visit the official SYNCO webזייטל אדער קאנטאקט זייער קאסטומער סערוויס דעפארטמענט. האלט אייער קויף קוויטל אלס באווייז פון קויפן פאר גאראנטיע קליימס.

אָנליין רעסורסן:

• SYNCO Brand Store on Amazon
• אפיציעלע באַניצער גייד (PDF)

זיכערקייַט אינפֿאָרמאַציע

• דו זאלסט נישט דיסאַסעמבאַל אָדער מאָדיפיצירן די מיטל.
• האַלט דעם אַפּאַראַט אַוועק פון וואַסער, פייַער און הויכע טעמפּעראַטורן.
• ויסמיידן דראַפּינג אָדער אונטערטעניק די מיטל צו שטאַרק ימפּאַקץ.
• אַוועקוואַרפן באַטעריעס און עלעקטראָנישע קאָמפּאָנענטן פאַראַנטוואָרטלעך לויט די לאָקאַלע רעגולאַציעס.