נול 88 רעדאַקטירן מעמאָרי טשילי פּראָ בייפּאַס דימער ינסטרוקציע מאַנואַל

This option allows you to edit the channel values and fade time of a programmed memory stored on the dimmer. Select the Edit Memory option from the Memories menu, and press the key. The screen shows:

If the memory is unprogrammed, a star (*) is shown next to the memory number and the memory cannot be edited. Use the numeric keypad or cursor keys to select the required memory (1-12), then press the ENT key to confirm. If the memory is programmed, the dimmer outputs the selected memory and the screen shows:

The cursor is shown in the Channel field. The Level field shows the programmed value for the channel. Adjust the level of each channel as required. This operation uses the same user interface as the Set Channel Level function in Manual Control. Press the ESC key. The screen shows:

The Memory field is for information only. The cursor appears in the Fade Time field. Use the numeric keypad or cursor keys to adjust the fade time as required (1 – 60 seconds). Press the ENT key to save the fade time and the channel levels into the memory. The screen briefly shows a confirmation, and then returns to the Edit Memory screen. The memory is removed from the outputs.

טשילינעט מאָדע
This option allows you to edit the channel values and fade time of a programmed memory for a selected area stored on the dimmer. Select the Edit Memory option from the Memories menu, and press the ENT key. The screen shows:

If the memory for the chosen area is unprogrammed – a star (*) is shown next to the memory number, and the memory cannot be edited. The cursor appears in the Area field. Enter the required area number using the numeric keypad or cursor keys, then press the ENT key. If the area number is valid, the cursor moves to the Memory field. Use the numeric keypad or cursor keys to select the required memory (1 – 12), then press the ENT key to confirm. If the memory for the chosen area is programmed, the dimmer outputs the selected memory and the screen shows:

The area number field A(xx) is for information only. The cursor is shown in the Channel field. The Level field shows the programmed value for that channel in the memory. Adjust the level of each channel as required. This operation uses the same user interface as the Set Channel Level function in Manual Control. Only those channels which are assigned to the specified area may be selected and edited. Press the ESC key. The screen shows:

The Area and Memory fields are for information only and are not editable. The cursor appears in the Fade Time field.Use the numeric keypad or cursor keys to adjust the fade time as required (1 – 60 seconds). Press the ENT key to save the fade time and the channel levels into the memory. The screen will briefly show a confirmation, and then return to the Edit Memory screen. The memory is removed from the outputs.

FAQ

What should I do if the memory is unprogrammed?

If a memory is unprogrammed, a star (*) will be shown next to the memory number, and editing is not possible. You need to program the memory first before editing it.

How many memories can be stored in the device?

The device can store up to 12 memories for easy access and customization.

דאָקומענטן / רעסאָורסעס

נול 88 רעדאַקטירן מעמאָרי טשילי פּראָ בייפּאַס דימער [pdf] אינסטרוקציע מאַנואַל
רעדאַקטירן זכּרון טשילי פּראָ בייפּאַס דימער, רעדאַקטירן זכּרון, טשילי פּראָ בייפּאַס דימער, בייפּאַס דימער, דימער

רעפערענצן

באַניצער מאַנואַל

נול 88 רעדאַקטירן מעמאָרי טשילי פּראָ בייפּאַס דימער

ספּעסאַפאַקיישאַנז

פּראָדוקט באַניץ אינסטרוקציעס

נאָרמאַל מאָדע

FAQ

דאָקומענטן / רעסאָורסעס

רעפערענצן

לאָזן אַ באַמערקונג

באָטל מאַכן ענטפער