באַזיצער ס מאַנואַל
רעקאָרד זכּרון
Watch this video to find out about recording memories using DMX input.
Watch this video to find out about recording memories manually.
נאָרמאַל מאָדע
In standard mode, recording memories allows you to store the current output levels in one of the 12 memories in the dimmer.
The fade time can also be adjusted, if required, during this operation.
It is recommended that when recording memories, the topset level for all channels is set to 100%.
Select the Record Memory option from the Memories menu, and press the ENT key. The screen shows:
רעקאָרד זכּרון
xx
The cursor appears in the memory number field (xx). Unprogrammed memories are indicated by an ‘*’ next to the memory number.
Use the numeric keypad or cursor keys to select the required memory (1 – 12).
Press the ENT key to confirm the memory selection. The screen shows:
Memory: xx
Fade Time: xx
The Memory field is for information only and is not editable. The cursor appears in the Fade Time field.
Use the numeric keypad or cursor keys to adjust the fade time as required (1 – 60 seconds).
Press the ENT key to save the fade time to the memory.
The dimmer will then grab the current output levels and store them in the selected memory.
The screen will briefly show a confirmation, and then return to the Record Memory screen.
טשילינעט מאָדע
In ChilliNet mode, recording memories allows you to store the current output levels in one of the 12 memories in the dimmer. Only the levels of the dimmer channels assigned to the specified area are recorded into the memory.
The fade time can also be adjusted, if required during this operation.
It is recommended that when recording memories, the topset level for all channels is set to 100%.
Select the Record Memory option from the Memories menu, and press the ENT key. The screen shows:
שטח: 1
Memory: xx
The cursor is in the Area field. Enter the required area number using the numeric keypad or cursor keys, then press the ENT key. If the area is valid, the cursor moves to the Memory field.
Use the numeric keypad or cursor keys to select the required memory (1 – 12).
Unprogrammed memories have an ‘*’ next to the memory number.
Press the ENT key to confirm the memory selection. The screen shows:
Area xx Mem xx
Fade Time: xx
The Area and Mem fields are for information only. The cursor appears in the Fade Time field.
Use the numeric keypad or cursor keys to adjust the fade time as required (1 – 60 seconds).
Press the ENT key to save the fade time to the memory.
The dimmer will then grab the current output levels for the selected area and store them in the selected memory.
The screen will briefly show a confirmation, and then return to the Record Memory screen.
דאָקומענטן / רעסאָורסעס
 |
zero 88 Chilli Pro Record Memory [pdf] באַזיצער'ס מאַנואַל Chilli Pro Record Memory, Chilli Pro, Record Memory, Memory |