NITECORE P27iX Customizable Variable Beam Pattern Owner’s Manual

NITECORE P27iX Customizable Variable Beam Pattern

באַניץ אינסטרוקציעס

• As illustrated, after unscrewing the battery cap, insert/remove the battery(s) and screw to tighten the tail cap. Please remove the insulation film before first use.
• The product is equipped with an intelligent charging system.
• As illustrated, use the USB cable to connect an external power supply (e.g. an adapter, power bank or other USB charging devices) to the charging port to begin the charging process.
• The product supports QC/PD fast charging.
• During the charging process, the green battery indicators will gradually transition from flashing to a steady light to display the battery level.
• When the battery is fully charged, the product will automatically cease the charging process and the green battery indicators will become steadily lit to inform the user.
• The lighting function is available during charging, except for LUMIN SHIELD, SEARCH, and STROBE.
• The normal charging time for a 21700 Li-ion battery (5,500mAh) is approx. 3 hours (charged via a 5V/2A adapter); the fast charging time is approx. 2 hours (charged via a PD/QC adapter).
• Lockout (Default Setting): When the light is on / off, slide the Lockout Switch (Rapid Lock™) up to access Lockout Mode.
• The lock icon can be seen below the Lockout Switch (Rapid Lock™). All buttons are unavailable to activate the flashlight in Lockout Mode.
• אויפשליסן: אין לאקאוט מאָדע, גליטשט אַראָפּ דעם לאקאוט קנעפּל (ראַפּיד לאָק™) צו פֿאַרלאָזן לאקאוט מאָדע.

פֿעיִקייטן

• Utilizes 4 five-core M515S LEDs with a max output of 5,000 lumens
• שפּיץ שטראַל ינטענסיטי פון 46,320 קד און מאַקסימום וואַרפן פון 430 מעטער
• Offers 4 brightness levels, LUMIN SHIELD○R, STROBE READY™, SEARCH and WARNING FLASH
• Supports button customization for quick access to special modes and brightness levels
• Includes a NITECORE NL2155HPi 21700 Li-ion battery (5,500mAh) and is compatible with CR123/RCR123 batteries
• A micro-textured orange peel reflector offers long range and wide angle lighting
• העכסט עפעקטיוו קעסיידערדיק קראַנט קרייַז גיט אַ סטאַביל רעזולטאַט פֿאַר אַרויף צו 100 שעה
• Level indicators and battery indicators available for indicating the current brightness level and remaining battery power
• Designed with dual tail buttons and a side SET button
• Intelligent Li-ion battery charging circuit with a USB-C charging port, supporting QC/PD fast charging up to 18W
• Lockout switch (Rapid Lock™) available (Patent No. CN202322748377.2; US Patent No. US12203638B1; EU Patent No. EP4459174A1)
• Features a high-strength stainless steel strike bezel with silicon nitride ceramic tips, capable of breaking glass quickly
• ינקאָרפּערייטיד אַוואַנסירטע טעמפּעראַטור רעגולירן (ATR) מאָדולע (פּאַטענט נומ זל201510534543.6)
• Constructed from 7075-T6 aero-grade aluminum alloy with HA III military-grade hard-anodized finish
• וואָטערפּרוף און דוסטפּראָאָף שאַץ לויט IP68 (2 מעטער סאַבמערסיבאַל)
• Impact-resistant to 2 meters

ספּעסאַפאַקיישאַנז

• לענג: 143 מם (5.63 אינטשעס)
• קאָפּ דיאַמעטער: 32 מם (1.26 ″)
• טוב דיאַמעטער: 26 מם (1.02 ″)
• Tail Width: 33mm (1.30″)
• Weight: 124g (4.37 oz) (Accessories Not Included) 201g (7.09 oz) (Battery Included)

אַקסעססאָריעס

• NITECORE NL2155HPi 21700 Rechargeable Li-ion Battery (5,500mAh), Tactical Holster NTH27, Clip, Spare O-ring, CR123 Battery Magazine, Lanyard Charging Cable

באַטאַרייע אָפּציעס

• The product is only compatible with NITECORE 21700 i Series batteries with an output over 15A and CR123/RCR123 batteries.

באַמערקונג:

1. DO NOT attempt to use the product to charge CR123/RCR123 batteries.
2. The product is NOT compatible with conventional 21700/18650 batteries.
3. When using CR123/RCR123 batteries, the maximum output is limited to 1,000 lumens.

טעכניש דאַטן

ניצן אַ 21700 לי-יאָן באַטערי:

באַמערקונג: The stated data is measured by using a 21700 rechargeable Li-ion battery (5,500mAh), in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, at an ambient temperature of 26°C (79°F) from the NITECORE Lab. The data may vary in real world use due to different different battery usage or environmental conditions.

• The LUMIN SHIELD○R, SEARCH, and STROBE are only accessible when using NITECORE 21700 i Series batteries with an output over 15A.
• די דאַטן ווערט געטעסט אָן די טעמפּעראַטור רעגולאַציע.

Using 2 x CR123 Batteries

באַמערקונג: The stated data is measured by using two CR123 batteries (1,600mAh), in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, at an ambient temperature of 26°C (79°F) from the NITECORE Lab. The data may vary in real world use due to different battery usage or environmental conditions.

• די דאַטן ווערט געטעסט אָן די טעמפּעראַטור רעגולאַציע.

אַפּערייטינג ינסטראַקשאַנז

באַטאַרייע ינסטאַללאַטיאָן / רעמאָוואַל

• As illustrated, after unscrewing the battery cap, insert / remove the battery(s) and screw to tighten the tail cap. Please remove the insulation film before first use.

ווארענונג: ענשור אַז די באַטאַרייע (s) איז ינסערטאַד מיט די positive סוף פייסינג צו די קאָפּ. דער פּראָדוקט וועט נישט אַרבעטן אויב די באַטאַרייע (s) איז פאַלש ינסערטאַד.

טשאַרדזשינג פֿונקציע

The product is equipped with an intelligent charging system. As illustrated, use the USB cable to connect an external power supply (e.g. an adapter, power bank or other USB charging devices) to the charging port to begin the charging process.

• The product supports QC/PD fast charging. During the charging process, the green battery indicators will gradually transition from flashing to a steady light to display the battery level.
• When the battery is fully charged, the product will automatically cease the charging process and the green battery indicators will become steadily turned on to inform the user.
• The lighting function is available during charging, except for LUMIN SHIELD®, SEARCH, and STROBE.
• The normal charging time for a 21700 Li-ion battery (5,500mAh) is approx. 3 hours (charged via a 5V/2A adapter); the fast charging time is approx. 2 hours (charged via a PD/QC adapter).

אנצינדן אויסלעשן
אויף:

• When the light is off, full press the Tail Button to access TURBO (Default Setting).
• When the light is off, half press the Tail Button to access MID (Default Setting).
• When the light is off, short press the SET Button to turn it on.

אויסגעלאשן: ווען די ליכט איז אויף, דריקן די עק קנעפּל צו קער עס אַוועק.
Note: When the light is turned on, the corresponding blue level indicators will light up and automatically turn off after 3 seconds of no operation.

Duty Grip

• The Duty grip supports Basic Mode and Advanced Mode, providing access to TURBO, HIGH, MID, LOW and WARNING FLASH. Users can select the desired mode.

Basic Mode (Default Setting)

• On: When the light is off, short press the SET Button to access LOW.
• Brightness Level Adjusting: After turning on the light, short press the SET Button within 3 seconds to cycle through the following sequence: LOW – MID – HIGH – TURBO- OFF.

Beam Pattern Switching (Default Setting: Floodlight):

• When LOW / MID / HIGH / TURBO is activated by short pressing the SET Button, press and hold the SET Button to cycle through the following sequence: Spotlight – Mixed Light – Floodlight.
• Release the button to select and memorize the beam pattern.
• The selected beam pattern will automatically apply to other brightness levels and WARNING FLASH. When reactivated, the product will automatically access the previously memorized beam pattern.

WARNING FLASH: When the light is off, press and hold the SET Button until the WARNING FLASH is activated. Short press the SET Button to turn the light off.
Off: After turning on the light, if there is no operation for 3 seconds, short press the SET Button to turn it off.

אַוואַנסירטע מאָדע

On: When the light is off, short press the SET Button to turn it on.
באַמערקונג: In Advanced Mode, the product features brightness level memory function. When reactivated, it will automatically access the previous memorized brightness level.

Brightness Level Adjusting:

• When the light is on, short press the SET Button to cycle through the following sequence: LOW – MID – HIGH – TURBO.

Beam Pattern Switching (Default Setting:

• Floodlight): When LOW / MID / HIGH / TURBO is activated by short pressing the SET Button, short press the SET Button, and then immediately press and hold it. The light will cycle through the following sequence: Spotlight – Mixed Light – Floodlight. Release the button to select and memorize the beam pattern.
• The selected beam pattern will automatically apply to other brightness levels and WARNING FLASH. When reactivated, the product will automatically access the previously memorized brightness level and beam pattern.

WARNING FLASH: When the light is off, press and hold the SET Button until the WARNING FLASH is activated. Short press the SET Button to turn the light off.
Off: When the light is on, long press the SET Button to turn it off.

מאָדע סוויטשינג

• When the light is off, full press and hold the Tail Button. While holding it, quickly press the SET Button three times. The light will flash once (Basic Mode) or twice (Advanced Mode) to confirm that the mode has been successfully switched.

Tactical Grip

• The tactical grip provides access to TURBO / HIGH, MID / LOW and LUMIN SHIELD® / STROBE / SEARCH.

טאַקטיש מאָמענטאַרי יללומינאַטיאָן

• When the light is off, half press and hold the Tail Button to access MID (Default Setting). Release to turn it off.
• When the light is off, full press and hold the Tail Button to access TURBO (Default Setting). Release to turn it off.
• When the light is off, half press and hold the Engage Button to access LUMIN SHIELD® (Default Setting). Release to turn it off.
• When the light is off, full press and hold the Engage Button to access STROBE (Default Setting). Release to turn it off.

On

• When the light is off, half press the Tail Button to access MID (Default Setting). Half press the Tail Button again to switch between TURBO and MID.
• When the light is off, full press the Tail Button to access TURBO (Default Setting). Half press the Tail Button to switch between MID and TURBO.

Beam Pattern Switching (Default Setting: Floodlight)

• In the Basic Mode, after turning on the light by half pressing or full pressing the Tail Button, press and hold the SET Button to cycle through the following sequence:
• Spotlight – Mixed Light – Floodlight. Release to confirm and memorize the beam pattern for the current brightness level. When the brightness level is reactivated, the product will automatically access the previously memorized beam pattern.
• In the Advanced Mode, after turning on the light by half pressing or full pressing the Tail Button, short press the SET Button, and then immediately press and hold it. The light will cycle through the following sequence: Spotlight – Mixed Light – Floodlight. Release to confirm and memorize the beam pattern for the current brightness level. When the brightness level is reactivated, the product will automatically access the previously memorized beam pattern.

באַמערקונג: When the light is activated by half pressing or full pressing the Tail Button, each brightness level supports independently selecting and memorizing a different beam pattern.

אַוועק

• When the light is on, full press the Tail Button to turn it off.

באַמערקונג: When LUMIN SHIELD® / STROBE / SEARCH is activated, the flashlight will automatically adjust the brightness to prevent overheating and prolong the lifespan of the flashlight. To restore the previous brightness, simply reactivate LUMIN SHIELD® / STROBE / SEARCH.

Customizable Button Settings

• The product features customizable buttons. Both half and full-press-and-hold of the Engage Button can be configured independently to directly access LUMIN SHIELD®, STROBE or SEARCH. Both half press and half-press-and-hold of the Tail Button can be configured to directly access LOW or MID, while full press and full-press-and-hold of the Tail Button can be configured to directly access HIGH or TURBO.

Engage Button Half-press-and-hold Configuration

• When the light is off, while half pressing and holding the Engage Button, long press the SET Button to cycle through the following sequence: LUMIN SHIELD® (Default Setting) – STROBE – SEARCH. Once the desirable output is selected, release both buttons. The light will memorize this setting for half-press-and-hold of the Engage Button.

Engage Button Full-press-and-hold Configuration

• When the light is off, while full pressing and holding the Engage Button, long press the SET Button to cycle through the following sequence: LUMIN SHIELD® – STROBE (Default Setting) – SEARCH. Once the desirable output is selected, release both buttons. The light will memorize this setting for full-press-and-hold of the Engage Button.

Tail Button Half Press / Half-press-and-hold Configuration

• When the light is off, while half pressing and holding the Tail Button, long press the SET Button to switch between LOW and MID (Default Setting). Once the desirable output is selected, release both buttons. The light will memorize this setting for both half press and half-press-and-hold of the Tail Button.

Tail Button Full Press / Full-press-and-hold Configuration

• When the light is off, while full pressing and holding the Tail Button, long press the SET Button to switch between HIGH and TURBO (Default Setting). Once the desirable output is selected, release both buttons. The light will memorize this setting for both full press and full-press-and-hold of the Tail Button.

באַשטעטיק צו פאַבריק פעליקייַט

• While in Lockout Mode, half or full press and hold the Engage Button without releasing it. Then, quickly short press the SET Button three times or more. The flashlight will flash three times to confirm that the reset has been successfully completed. Unlock the light to use.

לאַקאַוט / אַנלאַק

Lockout (Default Setting)

• When the light is on / off, slide the Lockout Switch (Rapid Lock™) up to access Lockout Mode. The lock icon can be seen below the Lockout Switch (Rapid Lock™). All buttons are unavailable to activate the flashlight in Lockout Mode.

ופשליסן

• In Lockout Mode, slide down the Lockout Switch (Rapid Lock™) to exit Lockout Mode.

מאַכט ינדיקאַטיאָן

• After the light is on, the green battery indicators will display the remaining battery power and automatically go off after 3 seconds.

נידעריק מאַכט ינדיקאַטיאָן

• When the battery power is below 10%, a green power indicator will flash, while the output may dim or the flashlight may become unresponsive. Please recharge the product or replace the battery as soon as possible.

Enable / Disable Indicators

• When the light is off, while half-pressing and holding the Tail Button, quickly short press the SET Button three times to turn off both the battery indicators and level indicators. To enable the indicators, repeat the same steps.

ATR (אַוואַנסירטע טעמפּעראַטור רעגולירן)

• The integrated ATR technology regulates the output of the product according to the working condition and ambient environment to maintain the optimal performance.

וישאַלט

• יעדער 6 חדשים, פֿעדעם זאָל זיין אפגעווישט מיט אַ ריין שטאָף נאכגעגאנגען דורך אַ דין קאָוטינג פון סיליציום-באזירט שמירעכץ.

וואָראַנטי סערוויס

• כל NITECORE® פּראָדוקטן זענען געראַנטיד פֿאַר קוואַליטעט. קיין DOA / דעפעקטיווע פּראָדוקט קענען זיין פארביטן פֿאַר אַ פאַרבייַט דורך אַ היגע דיסטריביאַטער / הענדלער ין 15 טעג פון קויפן.
• נאָך דעם, אַלע דעפעקטיווע / מאַלפאַנגקשאַנינג NITECORE® פּראָדוקטן קענען זיין ריפּערד פריי אין 60 חדשים פון די קויפן טאָג.
• ווייַטער פון 60 חדשים, אַ לימיטעד וואָראַנטי אַפּלייז צו קאַווערינג די קאָס פון אַרבעט און וישאַלט, אָבער נישט די קאָס פון אַקסעסעריז אָדער פאַרבייַט טיילן.

די וואָראַנטי וועט זיין נאַלאַפייד אויב

1. די פּראָדוקט (ס) איז / זענען צעבראכן, ריקאַנסטראַקטיד און / אָדער מאַדאַפייד דורך אַנאָטערייזד פּאַרטיעס.
2. די פּראָדוקט (s) איז / זענען דאַמידזשד רעכט צו ימפּראַפּער נוצן. (למשל ינסטאָלינג ריווערסט פּאָולעראַטי)
3. די פּראָדוקט (s) איז דאַמידזשד רעכט צו באַטאַרייע ליקאַדזש.

מער אינפֿאָרמאַציע

• פֿאַר די לעצטע אינפֿאָרמאַציע וועגן NITECORE® פּראָדוקטן און באַדינונגס, ביטע קאָנטאַקט אַ היגע NITECORE® דיסטריביאַטער אָדער שיקן אַן E- בריוו צו service@nitecore.com