IME IDM Configuration Software Instruction Manual

IME IDM Configuration Software

פּראָדוקט אינפֿאָרמאַציע

• Product Name: IDM Configuration Software
• ווייכווארג ווערסיע: 1.00.00
• Operating System Compatibility: Windows 10, Windows 7, etc.

פּראָדוקט באַניץ אינסטרוקציעס

1. ייַנמאָנטירונג
   1. Download the IDM Configuration Software from the IME webפּלאַץ.
   2. לויפן די ינסטאַלירונג file (.עקסע).
   3. Choose the language and click OK.
   4. גיי די ינסטראַקשאַנז אויף דעם עקראַן צו פאַרענדיקן די ינסטאַלירונג פּראָצעס.
2. Modification of Software’s Language
   1. In the software’s home page, click on “Software configuration”.
   2. קלייַבן די געבעטן שפּראַך.
   3. Click on Save to confirm the language change.
3. זוכן דעוויסעס
   1. In the software’s home page:
4. Click on “Search Device”.
   1. The scan page is divided into two sections:
      1. A. Channel Settings
      2. B. Device Settings
5. A. Channel Settings:
   • Choose the correct communication protocol (Modbus RTU, Modbus TCP, M-bus).
   • Choose the correct COM port.
6. B. Device Settings:
   • Verify and choose the correct Baud rate and Parity.
   • Search in a specific range of addresses or choose all addresses.

סיסטעם באדערפענישן

1. ייַזנוואַרג:
   • Intel® Core 2 Duo or AMD® Athlon X2® processor
   • 2 גיגאבייט פון באַראַן
   • 320 מב פון בנימצא שווער דיסק פּלאַץ
   • USB port for connection IDM Configurator
   • שטיצט אָפּערייטינג סיסטעמען:
   • Microsoft Windows XP (Professional) – Service Pack 3
   • Microsoft Windows Vista – Service Pack 2
   • Microsoft Windows 7 – Service Pack 3
   • Microsoft Windows 10 – All Service Pack Installation and Display:
   • אויף קאָמפּיוטער
2. פונדאַמענטאַל קאַנסעפּס
   1. The IDM Configuration Software offers the possibility of configuring CONTO Energy meters using a simple and intuitive procedure by the creation of a customized project based on personal needs and the actual system installed.
   2. Note: IDM Configuration Software is free. To be downloaded from the IME web site. Once downloaded it will be useful for all remote configurations of CONTO Energy Meters
3. קאַמפּאַטאַבאַל דעוויסעס
   1. ווייכווארג ווערסיע 1.00.00
      1. Range CONTO
   2. מאָדבוס
      1. Conto D2 63A 1ph Modbus (CE2DF3DTCL1)
      2. Conto D2 63A 1ph Modbus MID (CE2DF3DTMID)
      3. Conto D4 63A 3ph Modbus (CE4DF3DTCL1)
      4. Conto D4 63A 3ph Modbus MID(CE4DF3DTMID)
      5. Conto D4 5A 3ph Modbus(CE4TBDTCL1)
      6. Conto D4 5A 3ph Modbus MID(CE4TBDTMID)
   3. מבוס
      1. Conto D2 63A 1ph Mbus MID(CE2DF3MTMID)
      2. Conto D4 63A 3ph Mbus(CE4DF3MTCL1)
      3. Conto D4 5A 3ph Mbus(CE4TBMTCL1)
      4. Conto D4 5A 3ph Mbus MID(CE4TBMTMID)
4. שפראַכן בנימצא
   1. שפּראַכן:
      1. ענגליש
      2. Français
      3. Italiano

ימפּלעמענטאַטיאָן

1. מאַטעריאַל פארלאנגט
   1. Installation Kit (executable file “.exe”)
   2. A computer with a compatible operating system (10, 7, etc.)

ייַנמאָנטירונג

1. לויפן די file

The installation procedure starts

1. Choose the proper language
2. דריקט "OK"
3. Click “Next” 3
   1. The License agreement page appears
4. Click to declare to have read and accepted the contract
5. דריקט "ווייַטער"
6. Click “Browse” to choose the installation folder
7. דריקט "ווייַטער"
8. Click “Next.
   1. ייַנמאָנטירונג געענדיקט
9. דריקט "ענדיקן"
   1. On the desktop of your computer are created two shortcuts: – Energy management software:
   2. IME – Energy manager software
   3. IME – NEMO SX Configurator
   4. IME – IDM Configurator

Modification of the software’s language

• Procedure for changing language (if necessary)

In the software’s home page

1. Click “Software configuration”
2. Choose the required language
3. Click “Save” to confirm.

זוכן דעוויסעס

In the software’s home page

1. Click “Search Device”
   • The scan page is divided to 2 sections:
     • A. קאַנאַל סעטטינגס
     • B. מיטל סעטטינגס
     • A. קאַנאַל באַשטעטיקן
2. Choose the correct Communication Protocols. 3 Software supports :
   • Modbus RTU
   • מאָדבוס טקפּ
   • M-בוס
3. Choose the correct COM port.
   1. Modbus RTU
   2. B. מיטל סעטטינגס
4. Verify and choose the Correct Baud rate and Parity, otherwise
5. Choose the All Combinations.
6. Search in a specific range of addresses
7. Choose All addresses.
   1. מאָדבוס טקפּ
      1. First of all, it is needed a TCP gateway interface.
      2. פֿאַר עקסampלאַ:
      3. SXIIP: gateway Ethernet/RS485 (1:N)
      4. In this case, you need to connect your PC to the same network of your Modbus TCP gateway. (Ethernet)
8. Enter the IP Address of your gateway.
9. Search in a specific range of addresses or
10. Choose All addresses
    1. M-bus
    2. First of all, you need a M-Bus Converter
11. Choose the M-Bus Protocol.
12. Choose the correct COM port.
13. Verify and choose the Correct Baud rate and Parity, otherwise
14. Click on Search button
    1. Note: You can search the Primary Addresses o the Secondary Addresses.
15. Click Secondary Addressing for check.
    1. סקאַן
16. By clicking on the Search button, a page with the latest Firmware updates will be shoewn:
    1. MID devices are not updatable
    2. דערהייַנטיקונגען בנימצא
17. Click Update FW
18. Click “Continue” to go to the edit page of the configuration read.

Firmware דערהייַנטיקן פון דיווייסאַז

As soon as the search devices page appears, you can see if updated firmware is available for each module.

1. You can check the small window on top to update all the available firmware updates
2. Otherwise you can uncheck it and choose just the modules you would like to update
3. Finally, click on the update FW button (it might take some time to update, please wait until the software finishes the process)

מיטל קאַנפיגיעריישאַן

Configuration of devices on your system In the Home page

1. Click “Edit Configuration online”
   1. The Configuration Page will be appeared.
2. קאָנפיגוראַטיאָן בלאַט
   1. The page is divided into two sections:
      1. List of the devices
      2. Configuration Settings for the selected device on the section A

צו VIEW/CONFIGURE THE DEVICES CHARACTERISTICS In Settings

1. סעלעקטירן אַ מיטל
2. רענאַמע די מיטל
3. Click “Connection” and choose the correct connection
4. Click “External input” and choose the correct input
5. Click for assign the other control parameter.
   1. אין אַוואַנסירטע
6. Click “Advanced” and a set additional parameters are shown
7. Click for assign the other control parameters
8. Click “Save” to confirm

באַמערקונג:

• Device connected to the Wi-Fi
• Device not connected to the Wi-Fi

To be able to access the saved settings directly, click on “Export Configuration”. For more details, see page 26

• Configurable parameters of each module
  • Examples of Configuration
• View בלעטער
  • In the software’s Home page

1. Click “Visualize project”
   1. Devices display page appears

1. The page is divided into two e sections:
   1. 1. section shows the Devices (Network icon shows if your device is connected or no, (in all 3 protocols: Modbus RTU, Modbus TCP, M-bus)
      2. section is the area where is possible to select several pages (according to the functions present in a Device):
   2. Measure: display of the quantities measured by a device:
   3. Electricity measuring devices: Energy, Power, Voltages / Currents /Frequency, THD, and Harmonics
   4. THD and Harmonics are just available for the Easy Connects.

באַמערקונג:

• Indicates the active tariff

 Off-line operation

Import a configuration In the Software’s home page

1. Click “Import Configuration”
   1. System configuration appears
2. אויסקלייַבן די file to import (e.g. Configuration.XML), then
3. click “Open”
   1. 1. Configuration is ready to be edit
4. Export a configuration

In the System configuration page

1. Click “Export configuration.”
   1. A pop-up window appears
   2. Select where to save file, דעמאלט
   3. דריקט "היט"
      1. Configuration is saved on your computer

אָפט געשטעלטע פֿראגן