Access comprehensive user manuals and setup guides for Radio products, including smart motorized curtain motors, QR access control readers, and recreational tricycles.
די ראַדיאָ brand category encompasses a diverse array of products, providing innovative solutions across home automation, commercial security, and consumer recreation. From smart home devices like battery-operated motorized roller blinds to advanced security hardware such as RFID and QR code access control card readers, these products are designed to deliver reliability and convenience to a wide range of users.
Whether you are programming a tubular curtain motor, configuring an intelligent Wiegand access reader, or assembling a children's stroll trike, having the correct instructions is essential. Our extensive library of Radio manuals provides users with step-by-step setup walkthroughs, programming guidance, wiring definitions, and vital safety information to ensure the correct and long-lasting operation of your devices.
לעצטע מאַנואַלן פֿון manuals+ אויסגעקליבן פֿאַר דעם בראַנד.
געוויינטלעכע פראגעס וועגן מאַנואַלן, רעגיסטראַציע און שטיצע פֿאַר דעם בראַנד.
Use a 5V 1A or 2A USB charger (such as a standard smartphone charger) and connect it to the micro-USB port. The motor takes approximately 6 hours to fully charge before its first use.
Press and hold the P1 button on the motor for 10 seconds. The motor will jog 3 times and beep 3 times, indicating that the running direction has been successfully reversed.
Radio intelligent QR access control card readers typically support Wiegand (26/34/66), RS485, USB, and in some models, TCP/IP network output modes.
Press and hold the P1 button for 14 seconds until the motor jogs 4 times and beeps. The motor will be reset to factory settings and enter a deep sleep status.
Connect the reader to your PC using a USB cable, open the DEMO configuration software, select 'USB-HID' for the serial port number, and click 'Connect'. The device firmware version should display, confirming a successful connection.