Amewi Remote Controlled Mini Excavator 1:64 RTR Instruction Manual

הקדמה

This instruction manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Amewi 1:64 scale remote controlled mini excavator. Please read this manual thoroughly before first use and retain it for future reference.

זיכערקייַט אינפֿאָרמאַציע

WARNING: Not suitable for children under 3 years due to small parts. To be used under the direct supervision of an adult.

• Always operate the excavator in a safe environment, away from obstacles, people, and pets.
• ארבעט נישט לעבן וואַסער אדער אין נאַסע באדינגונגען צו פאַרמייַדן עלעקטרישע שאָדן.
• Ensure the excavator's battery is fully charged before each use for optimal performance.
• Do not attempt to modify or disassemble the excavator or remote control, as this may void the warranty and cause damage.
• Use only the provided charging cable for the excavator's battery.
• Remove batteries from the remote control if the product will not be used for an extended period.

פּעקל אינהאַלט

באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען אַרייַנגערעכנט אין אייער פּעקל:

• Amewi 1:64 Mini Excavator
• 2.4 גהז רימאָוט קאָנטראָל
• וסב-C טשאַרדזשינג קאַבלע
• ינסטראַקשאַנז מאַנואַל

סעטאַפּ

1. Charging the Excavator Battery

1. Locate the USB-C charging port on the excavator.
2. Connect the provided USB-C charging cable to the excavator.
3. Plug the other end of the USB-C cable into a standard USB charging power supply (not included), such as a wall adapter or power bank.
4. The charging indicator light (if present) will illuminate during charging and turn off or change color when fully charged.
5. Charging typically takes approximately 60-90 minutes for a full charge, providing up to 20 minutes of operating time.

2. רימאָוט קאָנטראָל באַטערי ינסטאַללאַטיאָן

The remote control requires 2x AAA batteries (not included).

1. געפֿינען די באַטאַרייע אָפּטייל אויף די צוריק פון די ווייַט קאָנטראָל.
2. עפענען די באַטאַרייע אָפּטייל דעקן.
3. אַרײַנשטעלן 2x AAA באַטעריעס, און זיכער מאַכן אַז די פּאָלאַריטעט איז ריכטיק (+/-).
4. פאַרמאַכן די באַטאַרייע אָפּטייל דעקן סיקיורלי.

3. פּערינג די רימאָוט קאָנטראָל

1. Ensure the excavator is fully charged and turned off.
2. Install fresh batteries in the remote control.
3. Turn on the excavator using its power switch.
4. צינדט אן די ווײַטקאָנטראָל דורך דריקן זײַן מאַכט קנעפּל.
5. The remote control and excavator should automatically pair. A successful connection is usually indicated by a solid light on both devices.
6. If pairing fails, turn both devices off and repeat the process.

אַפּערייטינג ינסטראַקשאַנז

1. רימאָוט קאָנטראָל פאַנגקשאַנז

מאַכט זיך באַקאַנט מיטן אויסלייג פֿון דער ווײַטקאָנטראָל:

• לינקס דזשויסטיק: Controls forward/backward movement and left/right turning of the excavator tracks.
• רעכט דזשויסטיק: Controls the movement of the excavator arm and shovel (up/down, scoop/dump).
• מאַכט קנעפּל (ⓘ): טוט אן/אויסדרייען די ווײַטקאָנטראָל.
• Speed Buttons (100%, 30%): Adjusts the excavator's driving speed.
• Shovel/Arm Excavation Loop Buttons (↑, ↓): Initiates an automatic excavation loop for the arm and shovel.

2. Driving the Excavator

1. פאָרויס / צוריק: Push the left joystick forward to move the excavator forward, pull it backward to move backward.
2. ווענדן: Push the left joystick left or right to turn the excavator. For spot turns, push one side forward and the other backward.

3. Excavator Arm and Shovel Control

1. Arm Up/Down: Move the right joystick up or down to raise or lower the main excavator arm.
2. Shovel Scoop/Dump: Move the right joystick left or right to control the shovel's scooping and dumping action.
3. Automatic Excavation: Press the ↑ or ↓ buttons to initiate a pre-programmed excavation sequence.

4. ספּיד סעטטינגס

The excavator offers two speed settings for different operating needs:

• 100% Speed: For faster driving and covering larger distances.
• 30% Speed: For precise maneuvering in tight spaces or for delicate operations. Select this speed for better control when performing detailed tasks.

וישאַלט

• רייניקונג: Use a soft, dry cloth to wipe down the excavator and remote control after each use. Avoid using water or chemical cleaners.
• סטאָרידזש: Store the excavator and remote control in a cool, dry place, away from direct sunlight and extreme temperatures.
• באַטערי זאָרגן: Fully charge the excavator's battery before storing for extended periods. Remove batteries from the remote control if not used for a long time.
• דורכקוק: Periodically check for any loose parts, damaged cables, or worn components. Do not operate if damage is present.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

Amewi products are designed for durability and performance. For warranty information, technical support, or replacement parts, please visit the official Amewi webפּלאַץ אָדער קאָנטאַקט דיין זיצער.

For further assistance, please refer to the contact information provided on the product packaging or the official Amewi webפּלאַץ: www.amewi.com