1. הקדמה
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.
Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).
2. סעטאַפּ
Follow these steps to set up your RGBlink NDI PTZ Camera Controller.
2.1 אויספּאַקן און ערשטע דורכקוק
- קערפאַלי באַזייַטיקן אַלע קאַמפּאָונאַנץ פון די פּאַקקאַגינג.
- באַשטעטיקן אַז אַלע זאכן וואָס זענען ליסטעד אין דער פּאַקינג רשימה זענען פאָרשטעלן.
- Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.
2.2 קאַנעקטינג די קאָנטראָללער
The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.
- מאַכט איבער עטהערנעט (פּאָע): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
- פונדרויסנדיק מאַכט אַדאַפּטער: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
- אַפּאַראַט קאַנעקשאַנז:
- Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
- סעריעל קאָנטראָל: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.
Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.
בילד 2.2: עקס.ample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.
Image 2.3: Diagram illustrating IP camera connections via a network switch.
2.3 נעטוואָרק קאָנפיגוראַטיאָן
For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.
- Access the controller's web צובינד דורך אַרייַן זייַן IP אַדרעס אין אַ web browser. (Refer to the device's display or network tools to find the IP address).
- The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
- אין די web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.
Image 2.4: NDI|HX camera search and control interface on the controller.
3. אָפּעראַציע
This section details the operational functions of the RGBlink NDI PTZ Camera Controller.
3.1 איבערview פון קאָנטראָלס
The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.
Image 3.1: The controller's 3.49-inch LCD display.
בילד 3.2: דעטאַלירט view of the 3D joystick and multi-function knobs.
Image 3.3: Layout of the controller's buttons and numeric keypad area.
3.2 אַפּאַראַט סעלעקציע
- שנעל אויסקלייבן קנעפּלעך: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
- נומעריק קיפּאַד: For cameras beyond the quick select buttons (up to 255), press the CAM ID button, then enter the camera number using the numeric keypad, and press אַרייַן.
Image 3.4: The controller's ability to manage multiple cameras.
3.3 PTZ קאָנטראָל
- דזשויסטיק: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
- PT ספּיד קנופּ: Adjusts the gimbal movement speed for pan and tilt.
- Zoom Knob: Provides precise zoom control, especially useful in preview מאָדע.
3.4 Image Parameter Adjustment
- IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
- R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
- FOCUS Button: דרוק די AUTO FOCUS button to switch the camera to auto focus mode.
- EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
- BACKLIGHT Button: Toggles the camera's backlight mode.
- WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
- ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.
Image 3.5: Functions of buttons and knobs on the left side of the controller.
Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.
3.5 פּרעסעץ
- SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press אַרייַן צו ראַטעווען. דרוק ESC צו אַרויסגאַנג.
- CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press אַרייַן to recall. Press ESC צו אַרויסגאַנג.
- The controller supports saving and recalling up to 255 presets per camera.
3.6 מעניו נאַוויגאַציע
- MENU קנעפּל: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), אַרייַן confirms selections, and ESC acts as a back button.
4. וישאַלט
Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.
4.1 רייניקונג
- Use a soft, dry cloth to clean the exterior of the controller.
- פֿאַר שווערן שמוץ, אַ ביסל דampווישט דעם שטאָף מיט וואַסער אָדער אַ מילדער, נישט-שרייַבנדיקער רייניקונג לייזונג.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
- Ensure no liquids enter the device through openings or ports.
4.2 סטאָרידזש
- ווען נישט אין באַנוץ פֿאַר לענגערע פּעריאָדן, זאָל מען האַלטן דעם קאָנטראָללער אין אַ קיל, טרוקן אָרט, אַוועק פֿון דירעקטער זון און עקסטרעמע טעמפּעראַטורן.
- באַשיצן די מיטל פון שטויב און נעץ.
5. טראָובלעשאָאָטינג
די סעקציע גיט לייזונגען צו געוויינטלעכע פראבלעמען וואָס איר קענט באַגעגענען.
5.1 קיין מאַכט
- קוק די מאַכט מקור: זיכער מאַכן אַז דער מאַכט אַדאַפּטער איז זיכער פארבונדן צו ביידע דעם קאָנטראָללער און אַ אַרבעטנדיקן מאַכט ווענטיל.
- PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
- קאַבלע אָרנטלעכקייַט: Inspect the power cable and Ethernet cable for any damage.
5.2 Cannot Control Camera
- נעץ קאַנעקטיוויטי: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
- פּראָטאָקאָל ניט פּאַסיק: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
- אַפּאַראַט ID: Ensure the correct camera ID is selected on the controller.
- לאָגין קראַדענטשאַלז: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web צובינד.
- סיריאַל קשר: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
- פירמוואַרע: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webפּלאַץ פֿאַר דערהייַנטיקונגען.
5.3 LCD Display Issues
- קיין ווייַז: זייט זיכער אז דער קאנטראלער איז אנגעצונדן.
- טונקל ווייַז: Check if there are any brightness settings on the controller that can be adjusted.
6. ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל | RGBBKT |
| דימענסיעס (L X W X H) | 11.4 x 7.8 x 5.9 אינטשעס (אומגעפער 290 x 200 x 150 מ״מ) |
| וואָג | 2.2 פונט (אומגעפער 1 ק"ג) |
| ווייַז | 3.49" על-סי-די |
| קאָנטראָל פּראָטאָקאָלס | VISCA over IP, ONVIF v2.42, NDI v5.5, Pelco-D/P |
| ינטערפייסיז | RS232, RS422, RS485, RJ45 Ethernet (PoE) |
| Camera Capacity | Up to 255 PTZ cameras |
| מאַכט אַרייַנשרייַב | PoE or DC 12V (external adapter) |
| דזשויסטיק | High-precision Hall sensor 3D joystick |
Image 6.1: Controller dimensions and typical usage environments.
Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.
7. פּראָדוקט ווידעא דעמאַנסטראַציע
Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.
Video 7.1: Official demonstration of the RGBlink PTZ Camera Controller Joystick, showcasing multi-camera control and key features.
8. וואָראַנטי און שטיצן
For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webפּלאַץ.
- פאַבריקאַנט: Xiamen RGBlink Science & Technology Co.,Ltd.
- באַאַמטער Webפּלאַץ: www.rgblink.com (באַמערקונג: דאָס איז אַ פּלאַץ האָלדער URL, please refer to your product packaging or official documentation for the correct support webפּלאַץ.)
- קאָנטאַקט אינפֿאָרמאַציע: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.
