הקדמה
This manual provides detailed instructions for the assembly, operation, and maintenance of your SANSI 100W Full Spectrum Tall Standing Grow Light. Designed to mimic natural sunlight, this grow light supports all stages of plant growth, ensuring your indoor plants thrive. Please read this manual thoroughly before use to ensure proper function and safety.
וואָס איז אין די קעסטל
- Floor Grow Light (includes Base Plate, Light Source, Lamp Rods, Telescopic Rod, Power Adapter)
- ווייַט קאָנטראָל
- ינסטראַקשאַנז מאַנואַל

אַסעמבלי אינסטרוקציעס
Follow these steps to assemble your SANSI Grow Light:
- באַוואָרענען די באַזע טעלער: Ensure the screw on the base plate is securely tightened.
- צוטשעפּען לamp Rod 1: Take out the first lamp rod and align its internal thread with the screw of the base plate. Tighten it securely.
- צוטשעפּען לamp Rod 2: פארבינדן די צווייטע לamp rod to the first, aligning the threads and tightening.
- Insert Telescopic Rod: Take out the telescopic rod. Loosen its adjusting nut and pull out the inner tube. Do not tighten the adjusting nut at this stage; allow the inner tube to extend and retract freely.
- Attach Light Source: Align the telescopic rod with the light source and tighten it. Hold the light source firmly and tighten the inner tube of the telescopic rod until it is secure. Then, tighten the adjusting nut to prevent the light source from falling.
- קאַבלע פאַרוואַלטונג: Route the power cable neatly along the pole.






Video 1: Detailed installation guide for the SANSI 100W Floor Grow Light. This video demonstrates each step of the assembly process, from unboxing to final setup.
אַפּערייטינג ינסטראַקשאַנז
אַדזשאַסטאַבאַל הייך
The SANSI grow light features a three-section detachable metal structure with an adjustable height ranging from 47 inches to 70.86 inches when fully extended. You can easily modify the height by sliding the telescoping pole or removing a section for a shorter lamp. This allows for effortless adjustments as your plants grow.

ווייַט קאָנטראָל פאַנגקשאַנז
Use the included remote control to manage the grow light's settings:
- מאַכט אויף / אַוועק: קער די ליכט אויף אָדער אַוועק.
- אַוטאָ טיימער: Set the light to operate for 8, 12, or 14 hours daily. The timer function will be disabled if there is a power outage or the unit is unplugged, requiring a reset.
- ברייטנאַס לעוועלס: Adjust brightness to 5 levels (20%, 40%, 60%, 80%, 100%) to meet your plants' specific needs.


Video 2: Showcase of the SANSI 100W 1.8m Tall Grow Light, demonstrating its features and benefits for plant growth.
שליסל פֿעיִקייטן
גאַנץ ספּעקטרום ליכט
The SANSI Grow Light provides full-spectrum supplementary light across the entire visible range of 400nm to 780nm, closely mimicking the solar spectrum with 4000K daylight. This ensures optimal light for every stage of plant growth, promoting vitality and enhancing yield.

High PPFD & Energy Saving
With an impressive 10,200 lumens and high Photosynthetic Photon Flux Density (PPFD), this 100W grow light effectively accelerates plant growth while consuming significantly less energy than traditional bulbs. It helps your greenery thrive faster and stronger.

Patented Ceramic Technology
SANSI's patented ceramic technology features a non-conductive ceramic heat sink that directly solders the LED chip. This design ensures superior heat dissipation, boosting light efficiency and extending the lifespan of your grow light compared to traditional aluminum-based LED lights.


Advanced Optical Design
The innovative Secondary Optical Design optimizes light distribution, providing even illumination and enhancing light utilization. This promotes uniform and robust growth for your plants.

זיכערקייַט אינפֿאָרמאַציע
To ensure safe operation and optimal plant health, observe the following:
- Maintain a distance of at least 1 foot (30 cm) between the light source and your plants to prevent heat stress.
- Avoid touching the bulb while it is in operation, as it can be hot and cause burns.
- Keep power sources and cables away from water and plants during watering to prevent electrical hazards.
- The light source can be adjusted to a range of 15° to the left and right. Do not exceed this range to prevent damage.

ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| סאָרט | SANSI |
| מאָדעל נומער | C23ZW026-V0100A27 |
| מאַכט מקור | קאָרדעד עלעקטריק |
| וואָסtage | 100 וואטס |
| ברייטנאַס | 10200 לומענס |
| קאָליר טעמפּעראַטור | 4000 קעלווין |
| קאָליר רענדערינג אינדעקס (CRI) | 95 |
| נומער פון ליכט קוואלן | 240 לעדס |
| אַדזשאַסטאַבאַל הייך | 47" - 70.86" |
| פּראָדוקט דימענשאַנז | 18.2"ל x 18.2"בר x 70"ה |
| פּונקט וואָג | 12.14 פונט |
| מאַטעריאַל | Aluminum, Polycarbonate (PC), Ceramic |
| ציבעלע פֿעיִקייטן | דימאַבלע |
וואָראַנטי און שטיצן
Your SANSI Grow Light comes with a 2-Year Support Service, ensuring long-lasting illumination for your indoor garden. For any inquiries or assistance, please contact SANSI customer support.
דערצו, שוץ פלענער זענען פאראן צו קויפן:
- 3-יאָר שוץ פּלאַן
- 4-יאָר שוץ פּלאַן
- קאָמפּלעט פּראָטעקט (מאָנטלעכער פּלאַן וואָס דעקט בארעכטיגטע קויפן)






