KAIWEETS KM100 Digital Multimeter and KET20 Test Leads User Manual

1. הקדמה

This manual provides essential instructions for the safe and effective use of your KAIWEETS KM100 Digital Multimeter and KET20 Silicone Multimeter Test Leads. Please read this manual thoroughly before operation and retain it for future reference. The KM100 is designed for measuring AC/DC Voltage, DC Current, Resistance, Continuity, and Diode. The KET20 test leads offer high safety and durability for various electrical testing applications.

Image 1.1: KAIWEETS KM100 Digital Multimeter and KET20 Silicone Test Leads. The image displays the black digital multimeter on the left and the red and black silicone test leads on the right.

2. זיכערקייַט אינפֿאָרמאַציע

WARNING: Electrical shock hazard. Improper use can result in injury or death. Always follow safety precautions.

• Ensure the rotary switch is set to the correct measurement range before connecting the test leads.
• Do not attempt to measure AC current with the KM100 multimeter, as it is designed for DC current only.
• The KET20 test leads are rated for CAT III 1000V and CAT IV 600V. Always use appropriate Personal Protective Equipment (PPE).
• Inspect test leads for damage before each use. Do not use if insulation is cracked or damaged.
• נישט איבערשטייגן די מאקסימום איינגאבע ווערטן פאר קיין קייט.
• Always disconnect power to the circuit before making resistance, continuity, or diode measurements.

בילד 2.1: דערציען view of the KAIWEETS KM100 Digital Multimeter, showing the kickstand and a warning label regarding electrical safety and proper usage.

3. פּראָדוקט איבערview

3.1 KAIWEETS KM100 Digital Multimeter

The KM100 features a clear digital display, a rotary switch for function selection, and input jacks for test leads. It includes a data hold function and a backlight for visibility in dim conditions.

3.2 KAIWEETS KET20 Silicone Multimeter Test Leads

The KET20 test leads are constructed from temperature-resistant soft silicone, ensuring flexibility and durability. They feature 2mm ultra-fine gold-plated probes for precision and 4mm banana plugs for universal compatibility. The leads are 48 inches long.

בילד 3.1: דעטאַלירט view of the KET20 test leads, highlighting features such as the 0.7mm tip, silicone material, 4mm banana plug, and 120cm length. The image also shows the CAT IV 600V and CAT III 1000V ratings.

Image 3.2: Close-up of the KET20 test leads, illustrating their flexible silicone material, high-purity copper wire, and gold-plated probes.

4. סעטאַפּ

1. ינסטאַלירן באַטעריז: Open the battery compartment on the back of the KM100 multimeter and insert the required batteries, observing polarity.
2. פאַרבינדן טעסט לידז:
   • Insert the black test lead into the 'COM' (common) jack.
   • פֿאַר רובֿ מעסטונגען (וואָל.tage, Resistance, Diode, Continuity), insert the red test lead into the 'VΩmA' jack.
   • For DC Current measurements up to 10A, insert the red test lead into the '10A' jack.
3. מאַכט אויף: Turn the rotary switch from 'OFF' to the desired measurement function.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1 אַק בtagE מעזשערמאַנט

צו מעסטן AC וואָלtage:

1. Set the rotary switch to the 'V~' (AC Voltagה) קייט.
2. Connect the red test lead to the 'VΩmA' jack and the black test lead to the 'COM' jack.
3. Carefully touch the probes to the points where you want to measure AC voltage.
4. לייענען די ווערט אויף די אַרויסווייַזן.

Image 5.1: The KAIWEETS KM100 Multimeter displaying an AC voltage reading while probes are inserted into a wall outlet. Note: This meter cannot be used to test AC current.

5.2 דק חלקtagE מעזשערמאַנט

צו מעסטן DC וואָלtage:

1. Set the rotary switch to the 'V-' (DC Voltagה) קייט.
2. Connect the red test lead to the 'VΩmA' jack and the black test lead to the 'COM' jack.
3. Touch the red probe to the positive side and the black probe to the negative side of the DC source.
4. לייענען די ווערט אויף די אַרויסווייַזן.

Image 5.2: The KAIWEETS KM100 Multimeter displaying a DC voltage reading while probes are connected to an automotive battery.

5.3 גלייכשטראָם מעסטונג

To measure DC current (up to 10A):

1. ווארענונג: Ensure the circuit is de-energized before connecting the meter in series.
2. Set the rotary switch to the 'A-' (DC Current) range.
3. Connect the red test lead to the '10A' jack and the black test lead to the 'COM' jack.
4. עפֿנט דעם קרייז וואו מען וויל מעסטן דעם שטראָם און פֿאַרבינדט דעם מעטער אין סעריע.
5. Re-energize the circuit and read the value.

5.4 קעגנשטעל מעזשערמאַנט

צו מעסטן קעגנשטעל:

1. ווארענונג: זיכער מאַכן אַז די קרייַז איז דעענערדזשייזד און אַלע קאַפּאַסיטאָרן זענען דיסטשאַרדזשד איידער איר מעסט די קעגנשטעל.
2. Set the rotary switch to the 'Ω' (Resistance) range.
3. Connect the red test lead to the 'VΩmA' jack and the black test lead to the 'COM' jack.
4. Touch the probes across the component or circuit segment.
5. לייענען די ווערט אויף די אַרויסווייַזן.

5.5 קאָנטינויטי טעסט

צו דורכפירן אַ קעסיידערדיק פּראָבע:

1. ווארענונג: זיכער מאַכן אַז די קרייז איז דעענערדזשייזד איידער איר טעסט די קאָנטיניואַטי.
2. Set the rotary switch to the '♪' (Continuity) range.
3. Connect the red test lead to the 'VΩmA' jack and the black test lead to the 'COM' jack.
4. Touch the probes across the component or wire.
5. If there is continuity (low resistance), the meter will emit an audible beep and display a low resistance value.

Image 5.3: The KAIWEETS KM100 Multimeter performing a continuity test on a wire, indicated by a 'buzz' sound effect shown in the image.

5.6 דיאָדע מעזשערמאַנט

צו מעסטן דיאָדעס:

1. ווארענונג: Ensure the circuit is de-energized before testing diodes.
2. Set the rotary switch to the '→|→' (Diode) range.
3. Connect the red test lead to the 'VΩmA' jack and the black test lead to the 'COM' jack.
4. באַרירט די רויטע פּראָבע צו דער אַנאָדע און די שוואַרצע פּראָבע צו דער קאַטאָדע פון ​​דער דיאָד.
5. לייענען די פאָרויס voltage drop on the display. Reverse the probes to check for an open circuit (OL) reading.

6. וישאַלט

• רייניקונג: Wipe the meter and test leads with a damp שטאָף. דו זאלסט נישט נוצן אַברייסיוו קלינערז אָדער סאָלוואַנץ.
• באַטערי פאַרבייַט: טוישט די באַטעריעס ווען דער נידעריקע באַטעריע אינדיקאַטאָר דערשיינט אויפן עקראַן.
• Fuse Replacement: The KM100 features double fuses for anti-burn protection. If the meter stops functioning in a current range, the fuse may need replacement. Refer to the full product manual for fuse specifications and replacement instructions.
• סטאָרידזש: Store the multimeter and test leads in a cool, dry place, away from direct sunlight and extreme temperatures. The included case provides protection during storage and transport.

Image 6.1: Illustration of the KET20 test leads' durability, high temperature resistance, safety features, convenience, and universal compatibility.

Image 6.2: Demonstrates the heat-resistant and corrosion-resistant properties of the silicone test leads, showing them exposed to flame and in a snowy environment, highlighting their suitability for extreme conditions.

7. טראָובלעשאָאָטינג

• קיין דיספּלעי / שוואַכע דיספּלעי: קאָנטראָלירט די אינסטאַלאַציע פון ​​די באַטעריע און צי זי זאָל אויפלאָדן. טוישט די באַטעריעס אויב נייטיק.
• פאַלש רידינגז:
  • Ensure the rotary switch is set to the correct function and range.
  • Verify test lead connections to the correct input jacks.
  • Check for damaged test leads or probes.
• קיין קראַנט מעסטונג: Check if the fuse for the current range is blown. Replace if needed (refer to full manual).
• קאָנטינויִטעט טעסט ביפּט נישט: זיכער מאַכן אַז די קרייז איז דעענערדזשייזד. קאָנטראָלירן צי עס איז אַן אָפענע קרייז אָדער אַ הויכע קעגנשטעל.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

KAIWEETS products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official KAIWEETS webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך. האלט אייער קויף קוויטל אלס באווייז פון קויפן.