וויכטיק סאַפעטי אינפֿאָרמאַציע
Please read and understand all instructions before installing or operating this water heater. Failure to follow these instructions may result in property damage, personal injury, or death.
- This appliance must be installed by a qualified plumber or electrician in accordance with all local codes and regulations.
- Ensure the power supply matches the specifications of the unit (120V, 1440W).
- Do not operate the water heater if it is not filled with water.
- Install a temperature and pressure relief (T&P) valve as specified in the installation instructions.
- צי ניט פאַרשפּאַרן אָדער הamper with the T&P valve.
- Maintain proper clearances around the unit for ventilation and service.
- אָפּשטעקן די מאַכט איידער איר דורכפירן קיין וישאַלט אָדער סערוויס.
פּראָדוקט איבערview
The Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater is designed to provide instant hot water at the point of use, reducing wait times and conserving energy. Its compact design allows for versatile installation in various settings.
שליסל פֿעיִקייטן
- 2.5 גאלאן קאַפּאַציטעט: Stores heated water for immediate use.
- 1440W Heating Element: Provides rapid heating for on-demand hot water.
- דוראַבאַל ומבאַפלעקט שטאָל טאַנק: Resists corrosion for extended product life.
- Triple-Layer Insulation: Features enamel coating, high-density insulation foam, and a reinforced decarburized steel plate for superior heat preservation and reduced energy loss.
- אַדזשאַסטאַבאַל טערמאַסטאַט: Allows precise temperature control up to 85°C (185°F).
- ימפּרוווד זיכערקייַט: Includes high-temperature resistance, high-pressure resistance (up to 1.0 MPa), dry-burn protection, IPX4 waterproof rating, and advanced leakage prevention.
- ווערסאַטאַל ינסטאַלירונג: Can be installed under-sink, on a wall, or floor-mounted.
אַפּאַראַט קאַמפּאָונאַנץ
The water heater includes the main unit, a temperature and pressure relief (T&P) valve, mounting brackets, and screws.
בילד: פראָנט view of the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater, showing the control knob and inlet/outlet connections.
ספּעסאַפאַקיישאַנז
Detailed technical specifications for the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater.
| באַשרייַבונג | ווערט |
|---|---|
| סאָרט | ראַנעין |
| מאָדעל נומער | RC25G-W |
| קאַפּאַציטעט | 2.5 גאלאנען |
| Voltage | 120 וואלטס |
| וואָסtage | 1440 וואטס |
| מאַקסימום טעמפּעראַטור | 85°C (185°F) |
| מאַקסימום אַפּערייטינג דרוק | 100 פּסי (1.0 מפּאַ) |
| וואָטערפּרוף רייטינג | IPX4 |
| פּראָדוקט דימענשאַנז (B x H x D) | 13.39" x 13.39" x 11.42" |
| פּונקט וואָג | 17.63 פונט |
| מאַונטינג טיפּ | Floor, Wall |
Image: Visual representation of the water heater's dimensions and key specifications, including capacity, voltage, מאַכט, מאַקסימום וואַסער דרוק, וואָג, ampערידזש, און וואַסערפּרוף גראַד.
ייַנמאָנטירונג
איידער ייַנמאָנטירונג
- Verify that the installation location is suitable for the unit's size and weight when full.
- זיכער מאַכן צוטריט צו אַ נאָרמאַל 120V עלעקטרישע ווענטיל.
- Confirm that water supply lines are accessible and can be connected to the unit.
- אויסלעשן די הויפּט וואַסער צושטעל און עלעקטרישע מאַכט צו דער אינסטאַלאַציע געגנט.
מאַונטינג אָפּציעס
The Ranein WarmCube 2.5 can be installed in several configurations:
- Under-Sink: Ideal for kitchens and bathrooms where space is limited.
- וואנט-מאָונטעד: Use the provided mounting brackets and screws to secure the unit to a sturdy wall surface.
- Floor-Mounted: שטעלן די אַפּאַראַט אויף אַ סטאַביל, גלייַך ייבערפלאַך.
Image: Depicts the water heater installed under a sink and wall-mounted in a bathroom vanity, illustrating versatile placement options.
גערער קאַנעקשאַנז
- Install the provided Temperature and Pressure (T&P) relief valve into the designated port on the top of the water heater. Ensure a watertight seal using appropriate sealant (e.g., PTFE tape).
- Connect the cold water inlet (blue port) to your cold water supply line.
- Connect the hot water outlet (red port) to your hot water faucet or fixture.
- Open the hot water faucet at the fixture to allow air to escape from the tank as it fills with water.
- Once water flows steadily from the hot water faucet, close the faucet. Check all connections for leaks.
Video: Demonstrates the installation of the pressure relief valve onto the Ranein mini tank water heater, showing the proper threading and tightening process.
עלעקטריקאַל קאַנעקשאַן
- Plug the water heater's power cord into a grounded 120V electrical outlet.
- Ensure the outlet is dedicated and properly rated for the appliance's wattagE (1440וו).
אָפּעראַציע
ערשט סטאַרטאַפּ
- After plumbing and electrical connections are complete and checked, turn on the electrical power to the unit.
- די הייצונג אינדיקאַטאָר ליכט וועט זיך אָנצינדן, וואָס ווײַזט אָן אַז דער וואַסער כיטער הייצט אַקטיוו דאָס וואַסער.
- Allow sufficient time for the water to reach the desired temperature.
טעמפּעראַטור אַדזשאַסטמאַנט
- The water heater features a front-mounted rotary knob for temperature adjustment.
- דריי דעם קנעפּל זייגערווייז צו פאַרגרעסערן די טעמפּעראַטור און קעגן זייגערווייז צו פאַרמינערן עס.
- The temperature range is typically between 55°F (13°C) and 145°F (63°C). Adjust to a comfortable and safe level.
- For energy efficiency, consider setting the temperature to the lowest comfortable setting.
Image: Illustrates the temperature adjustment knob on the water heater, with examples of suitable temperatures for various uses like washing dishes, vegetables, brushing teeth, and washing face.
וישאַלט
Regular maintenance ensures optimal performance and extends the lifespan of your water heater.
רוטין וישאַלט
- יערלעך דורכקוק: Have a qualified professional inspect the unit annually for any signs of wear, corrosion, or leaks.
- ט&פּ ווענטיל טעסט: Test the T&P relief valve at least once a year by lifting the lever. Ensure water flows freely and then reseats properly. If it does not, replace the valve.
- עקסטעריאָר רייניקונג: ריין די יקסטיריער פון די אַפּאַראַט מיט אַ ווייך, דamp שטאָף. דו זאלסט נישט נוצן אַברייסיוו קלינערז.
דריינינג די טאַנק
If the unit will be unused for an extended period or if there is a risk of freezing, drain the tank:
- Turn off the electrical power to the water heater.
- Turn off the cold water supply to the unit.
- Open a hot water faucet at a nearby fixture to relieve pressure.
- Carefully open the drain valve (if equipped) or disconnect the cold water inlet to allow the tank to drain.
- Once drained, leave the faucet open and the cold water inlet disconnected until ready to refill.
טראָובלעשאָאָטינג
זעט די טאבעלע אונטן פאר אלגעמיינע פראבלעמען און זייערע מעגליכע לייזונגען.
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| קיין הייס וואַסער | No power; Thermostat set too low; Heating element failure | Check power supply/breaker; Adjust thermostat; Contact customer support |
| וואַסער נישט הייס גענוג | Thermostat set too low; High hot water demand; Cold water mixing | Increase thermostat setting; Allow time for recovery; Check for cross-connection |
| וואַסער אויך הייס | טערמאַסטאַט שטעלן צו הויך | Decrease thermostat setting |
| Leaking from T&P valve | Excessive pressure; Faulty valve | Check water pressure; Replace T&P valve |
| אַפּאַראַט מאכן ראַש | זאַץ אויפבוי אין טאַנק | Drain and flush the tank (refer to maintenance section) |
וואָראַנטי און שטיצן
Ranein products are manufactured to high-quality standards and are backed by a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Ranein customer support through the retailer where the product was purchased or visit the official Ranein webפּלאַץ פֿאַר קאָנטאַקט אינפֿאָרמאַציע.
