M5Stack Cardputer v1.1

M5Stack Official Cardputer with M5stampS3 v1.1 Development Kit User Manual

Brand: M5Stack | Model: Cardputer v1.1

1. הקדמה

This manual provides essential information for the M5Stack Official Cardputer with M5stampS3 v1.1 Development Kit. It covers product features, setup instructions, operational guidelines, maintenance tips, and technical specifications to ensure proper use and functionality.

M5Stack Cardputer v1.1 Development Kit

Image 1.1: The M5Stack Cardputer v1.1 Development Kit, a compact, card-sized computer with a full QWERTY keyboard and integrated M5stampS3 microcontroller.

2. פּאַקעט אינהאַלט און סעטאַפּ

2.1. וואָס איז אין דער קעסטל

  • Cardputer v1.1 x 1
  • L-shaped hex wrench 1.5mm (for M2 screws) x 1
M5Stack Cardputer and hex wrench

Image 2.1: The Cardputer v1.1 and the included hex wrench for potential assembly or maintenance.

2.2. ערשטע אײַנשטעלן און קאָנפיגוראַציע

  1. מאַכט קשר: Connect the Cardputer to a power source using the USB-C port. The device includes a 1400mAh battery.
  2. SD קאָרט ינסערשאַן: For optimal use, insert a Micro SD card (32GB or less recommended) into the designated slot.
  3. פירמוואַרע: The device comes with pre-installed firmware. To explore additional functionalities or custom applications, consider installing the M5 Launcher or M5Stack Burner. Refer to the official M5Stack website for detailed instructions and available firmware.

3. ייַזנוואַרג איבערview

The Cardputer v1.1 integrates several components into a compact form factor.

Labeled diagram of M5Stack Cardputer v1.1 features

Image 3.1: Key external features of the Cardputer v1.1, including the 1.14" IPS-LCD, 56-key keyboard, microphone, speaker, and M5stampS3 module.

3.1. הויפּט קאַמפּאָונאַנץ

  • מיקראָקאָנטראָללער: M5stampS3 (ESP32-S3)
  • ווייַז: 1.14-inch IPS-LCD (ST7789V2, 240x135 pixels)
  • אַרייַנשרייַב: 56-key QWERTY keyboard, PDM-MIC@SPM1423 (microphone)
  • רעזולטאַט: I2S-Speaker@NS4168 (1W speaker)
  • קאַנעקטיוויטי: Wi-Fi, Bluetooth, Grove port (G5V G2 G1), Micro SD card slot, USB-C
  • מאַכט: Internal 120mAh battery, additional 1400mAh battery in the backpack module.
  • אנדערע: IR G44 (infrared), Magnet, Button RST (reset), Button GO.
אינערלעכער view of M5Stack Cardputer v1.1 board with labeled components

בילד 3.2: אן אינערליכע view of the Cardputer's main board, highlighting the M5stampS3, IPS-LCD, and various connection points.

3.2. גשמיות דימענשאַנז

The device measures approximately 84mm (3.3in) in length, 54mm (2.1in) in width, and 19.7mm (0.77in) in thickness, with a weight of approximately 90.0 grams.

M5Stack Cardputer v1.1 with dimensions labeled

Image 3.3: Physical dimensions of the M5Stack Cardputer v1.1.

4. Operating the Cardputer

4.1. Keyboard and Screen Interaction

The Cardputer features a 56-key QWERTY keyboard for text input and command execution. The 1.14-inch IPS-LCD provides visual feedback and interface navigation.

Close-up of M5Stack Cardputer v1.1 screen and keyboard

בילד 4.1: א דעטאלירטע view of the Cardputer's screen and keyboard, showing key layout and display clarity.

4.2. Basic Functions and Applications

The Cardputer is designed for various development and learning applications. Depending on the loaded firmware, it can perform tasks such as:

  • Wi-Fi scanning and network analysis
  • טייַמער פאַנגקשאַנז
  • System hardware tests (e.g., display, microphone, speaker, gyroscope)
  • Infrared remote control capabilities
  • בלועטאָאָטה לאָו ענערגיע (BLE) קאָמוניקאַציע
  • Embedded system development and learning
  • Industrial control and automation
  • Home control systems
  • Wireless communication and IoT projects
M5Stack Cardputer v1.1 screen displaying various functions

Image 4.2: The Cardputer's screen interface, showing options for Wi-Fi scan, record, chat, and other functions.

4.3. קאָנעקטיוויטי פּאָרטן

The device offers multiple connectivity options for expansion and interaction:

  • גראָווע פּאָרט: For connecting M5Stack's ecosystem of modules and sensors.
  • מיקראָ סד קאָרט שפּעלטל: פֿאַר עקסטערנער סטאָרידזש.
  • וסב- C פּאָרט: For power, data transfer, and programming.
זייַט view of M5Stack Cardputer v1.1 with Grove port

בילד 4.3: זייט view showing the Grove port for external module connections.

זייַט view of M5Stack Cardputer v1.1 with Micro SD card slot

בילד 4.4: זייט view showing the Micro SD card slot for expandable storage.

5. ספּעסאַפאַקיישאַנז

שטריךדעטאַל
SoCESP32-S3@Xtensa LX7 Wi-Fi, USB-OTG function
פלאַש16 מב פלאַש
PSRAM8MB PSRAM
ווי-פי802.11 b/g/n (2.4 GHz Wi-Fi)
רירFT6336U@capacitive touch, touch area pixels 320 x 280 (Note: Product description states 1.14" IPS-LCD 240x135, this touch spec might be for a different model or general capability)
לקד סקרין1.14"@240 x 135 ILI9342C, SPI communication
מאַכט מאַנאַגעמענט טשיפּAXP2101
RTCBM8563
קפּו מאַנופאַקטורערעספּרעסיף
נומער פון פּראַסעסערז2
באַראַןLPDDR4
אָפּערייטינג סיסטעםLinux (Note: This is a general capability, specific firmware may vary)
פּונקט וואָג3.52 אונסעס
פּעקל דימענשאַנז5.63 X 3.58 X 0.91 אינטשעס
באַטעריז1 נישט-סטאַנדאַרט באַטאַרייע (אַרייַנגערעכנט)

6. וישאַלט

6.1. באַטערי קער

The Cardputer contains an internal 120mAh battery and an additional 1400mAh battery in the backpack module. To prolong battery life:

  • ויסמיידן עקסטרעם טעמפּעראַטורעס.
  • Charge the device regularly, but avoid overcharging or completely draining the battery for extended periods.
  • ניצט דעם צוגעשטעלטן USB-C קאַבל צום אויפלאָדן.
עקספּלאָדעד view of M5Stack Cardputer v1.1 showing internal battery

בילד 6.1: אן עקספלאדירטע view illustrating the internal battery component of the Cardputer.

6.2. רייניקונג

Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials that could damage the screen or casing.

7. טראָובלעשאָאָטינג

If you encounter issues with your Cardputer, consider the following general troubleshooting steps:

  • מאַכט ישוז: Ensure the device is fully charged or connected to a stable power source.
  • מיטל ניט ריספּאַנדאַבאַל: Try pressing the Reset button (BtnRst) or power cycling the device using the ON/OFF switch.
  • Firmware Related: If a specific function is not working, it might be related to the installed firmware. Check the M5Stack official documentation for firmware updates or alternative firmware options.
  • קאַנעקטיוויטי: Verify all physical connections (USB-C, Grove, SD card) are secure.

For more detailed troubleshooting guides and community support, visit the official M5Stack webפּלאַץ: m5stack.com. Navigate to the 'DOCUMENT' section and search for your product model to find tutorials and resources.

8. וואָראַנטי און שטיצן

The M5Stack Cardputer v1.1 Development Kit is covered by the manufacturer's standard warranty. For specific warranty terms, technical support, or service inquiries, please refer to the official M5Stack website or contact their customer service directly. Additional protection plans may be available from your retailer.

פֿאַרבונדענע דאָקומענטן - Cardputer v1.1

Preview M5Stack קאַרדפּוטער V1.1: פּאָרטאַטיוו קאָמפּיוטער און אַנטוויקלונג פּלאַטפאָרמע גייד
א פולשטענדיגע אנווייזונג צום M5Stack קארדפּוטער v1.1, א הויך-פארשטעלונג טראָגבאַרער קאָמפּיוטער פֿאַר אינזשענירן און דעוועלאָפּערס. פֿעיִטשערס StampS3A קאָנטראָללער, 56-קנעפּלעך קלאַוויאַטור, 1.14-אינטש TFT פאַרשטעלן, MEMS מיקראָפאָן, און ברייטע קאָנעקטיוויטי. כולל סעטאַפּ אינסטרוקציעס, אָפֿט געשטעלטע פֿראַגעס, ספּעציפֿיקאַציעס, און אַנטוויקלונג פּלאַטפאָרמע דעטאַלן.
Preview M5STACK קאַרדפּיוטער: פּאָרטאַטיוו ESP32-S3 אַנטוויקלונג קאָמפּיוטער
אויספאָרשן דעם M5STACK קאַרדפּיוטער, אַ קאָמפּאַקטן און פילזײַטיקן אַנטוויקלונג קאָמפּיוטער מיט דעם ESP32-S3FN8 טשיפּ, 56-קנעפּלעך קלאַוויאַטור, TFT פאַרשטעלן, און ברייטע קאָנעקטיוויטי פֿאַר שנעלע פּראָוטאַטייפּינג און עמבעדיד פּראָיעקטן.
Preview M5Stack קאַרדפּוטער V1.1 באַניצער גייד און פירמווער פלאַשינג
א פולשטענדיגע אנווייזונג פארן M5Stack קארדפיטער V1.1, וואס באדעקט פאבריק פירמווער פלאַשינג, טראָובלעשווטינג געוויינטלעכע פּראָבלעמען ווי שוואַרצע סקרינז, און USB דרייווער אינסטאַלאַציע ניצנדיק M5Burner. לערנט זיך ווי צו צוגרייטן, אינסטאַלירן דרייווערס, אויסקלייבן פּאָרץ, און ברענען פירמווער פֿאַר אייער דעווייס.
Preview M5STACK דיןמעטער: פּראָדוקט פֿאַרענדיקטview און שנעל אָנהייב גייד
א פולשטענדיקע אנווייזונג צום M5STACK דינמעטער, אן איינגעבויטע אנטוויקלונגס-ברעט געטריבן דורך M5StampS3. פֿעיִטשערס אַרייַננעמען אַ 1.14-אינטש פאַרשטעלן, ראָטאַרי ענקאָדער, און ברייט קאַנעקטיוויטי. לערנט וועגן זייַנע ספּעסיפיקאַציעס און ווי צו דורכפירן WiFi און BLE סקאַנז מיט Arduino IDE.
Preview מ5סטאַק סטAMPS3 דאַטאַבלאַט און טעכנישע ספּעציפֿיקאַציעס
אויספאָרשן די M5STACK גאַסAMPS3 אנטוויקלונג ברעט, מיט דעם ESP32-S3 טשיפּ מיט Wi-Fi און בלועטוט 5 (LE). די דאטן-בלאט דעטאלירט איר האַרדווער צוזאמענשטעלונג, פּין באַשרייַבונגען, פאַנגקשאַנאַל קייפּאַבילאַטיז, און עלעקטרישע קעראַקטעריסטיקס פֿאַר IoT פּראָיעקטן.
Preview M5Stack AtomS3-Lite ESP32-S3 אנטוויקלונג ברעט
אויספאָרשן די M5Stack AtomS3-Lite, אַ קאָמפּאַקטע ESP32-S3 אַנטוויקלונג ברעט מיט Wi-Fi, אַן אינטעגרירטע אַנטענע, און ווערסאַטאַל אינטערפייסיז פֿאַר IoT און מיקראָקאָנטראָללער פּראָיעקטן. לערנט וועגן זייַנע ספּעציפֿיקאַציעס, פֿעיִקייטן, און אַנטוויקלונג אָפּציעס מיט Arduino IDE און UiFlow2.