SPC Performance 67405 Adjustable Rear Toe Control Arm Instruction Manual

1. פּראָדוקט איבערview

The SPC Performance 67405 Adjustable Rear Toe Control Arm is designed to restore and provide full toe adjustment capabilities for the rear suspension of specific Ford Explorer vehicles. Many of these vehicles have been subject to recalls due to corrosion issues, which can lead to the removal of factory toe adjustability. This control arm allows for precise alignment settings, which is crucial for preventing premature tire wear and ensuring proper vehicle handling.

שליסל פֿעיִקייטן:

• קאַמפּאַטאַבילאַטי: Specifically designed for Ford Explorer vehicles affected by corrosion recalls that removed rear toe adjustability.
• רעסטאָראַטיאָן: Fully adjustable design restores the complete adjustment range for proper alignment settings.
• Tire Protection: Enables correct toe alignment adjustment to help prevent premature tire wear after recall service.
• ווערסאַטאַליטי: Can be used in conjunction with SPC PN# 84130 for additional rear camber adjustment, if required.

2. פּעקל אינהאַלט

Please verify that all items are present before beginning installation:

• 1 x SPC Performance 67405 Adjustable Rear Toe Control Arm
• אינסטאַלאַציע האַרדווער (ווי צוגעשטעלט דורך פאַבריקאַנט)

Note: This product is sold individually per control arm. Two units are required for complete vehicle service (one for each side of the vehicle).

3. וויכטיק סאַפעטי אינפֿאָרמאַציע

Automotive suspension work requires specialized tools and knowledge. Improper installation can lead to vehicle damage, loss of control, and serious injury. It is highly recommended that installation be performed by a qualified automotive technician.

• טראָגט שטענדיק פּאַסיקע פּערזענלעכע שוץ-עקוויפּמענט (PPE), אַרייַנגערעכנט זיכערהייטס-ברילן און הענטשקעס.
• Ensure the vehicle is securely supported on a lift or jack stands on a level surface before beginning any work. Never rely solely on a jack.
• טרענט אפ די באטעריע פונעם אויטא איידער איר ארבעט אויף עלעקטרישע קאמפאנענטן, אויב נויטיג.
• זעט דעם סערוויס מאַנואַל פֿונעם פֿאָרמיטל פאַבריקאַנט פֿאַר ספּעציפֿישע טאָרק ספּעציפֿיקאַציעס און פּראָצעדורן.
• האַלטן קינדער און פּעץ אַוועק פון די אַרבעט געגנט.

4. ינסטאַללאַטיאָן גייד

This guide provides general instructions. Always consult a professional service manual for your specific Ford Explorer model for detailed steps and torque specifications.

4.1. פאַר-ינסטאַלירונג סטעפּס

1. פּאַרקירט דאָס אויטאָ אויף אַ גלייכער ייבערפלאַך און אַקטיווירט די פּאַרקינג ברעיק.
2. Loosen the lug nuts on the rear wheels.
3. Safely lift the rear of the vehicle using a hydraulic lift or jack and secure it with jack stands.
4. אַראָפּנעמען די דערציען ווילז.
5. Locate the existing rear toe control arm.

4.2. Removal of Existing Control Arm

1. Carefully remove the bolts securing the existing rear toe control arm to the vehicle's subframe and the knuckle assembly.
2. Retain all hardware for potential reuse or comparison with new hardware.
3. Remove the old control arm.

4.3. Installation of SPC 67405 Control Arm

1. Compare the new SPC 67405 control arm with the old unit to ensure it is the correct replacement.
2. Install the SPC 67405 control arm into the vehicle's subframe and knuckle assembly using the provided or appropriate hardware. Do not fully tighten bolts at this stage.
3. Adjust the length of the control arm to approximately match the length of the removed factory arm. This will provide a starting point for alignment.
4. Once the vehicle is at ride height (wheels on the ground or suspension loaded), fully tighten all mounting bolts to the vehicle manufacturer's specified torque values. This is critical to prevent premature bushing wear and ensure proper function.

4.4. פּאָסטן-ינסטאַללאַטיאָן

• Reinstall the rear wheels and tighten lug nuts to manufacturer specifications.
• Lower the vehicle safely.
• Immediately after installation, a professional wheel alignment is mandatory. The adjustable nature of this control arm requires precise adjustment to achieve correct toe settings and prevent tire wear.

5. וישאַלט

To ensure the longevity and proper function of your SPC Performance 67405 Adjustable Rear Toe Control Arm, periodic inspection is recommended:

• וויסואַל דורכקוק: Regularly inspect the control arm, bushings, and ball joint for any signs of wear, damage, or corrosion.
• פאַסטענער טאָרק: Periodically check the torque of all mounting bolts to ensure they remain at the manufacturer's specified values. Loose fasteners can lead to noise, premature wear, and alignment issues.
• אויסריכטונג טשעקס: If you notice uneven tire wear or changes in vehicle handling, have a professional alignment shop check and adjust the rear toe settings.

6. טראָובלעשאָאָטינג

If you experience issues after installing the SPC Performance 67405 control arm, consider the following:

• אומגלייכע רייפן טראָגן: This is typically a symptom of incorrect wheel alignment. Ensure a professional alignment has been performed after installation.
• Unusual Noises (clunking, squeaking):
  • קאָנטראָלירט אַלע מאַונטינג באָלץ פֿאַר ריכטיקן טאָרק.
  • Inspect bushings and ball joint for damage or improper seating.
  • Ensure no components are contacting other parts of the suspension or chassis.
• Vehicle Pulling/Poor Handling: This indicates an alignment issue. Re-check alignment settings with a qualified technician.

If problems persist, consult a qualified automotive technician or contact SPC Performance customer support.

7. פּראָדוקט ספּעסאַפאַקיישאַנז

8. וואָראַנטי און שטיצן

For specific warranty information regarding the SPC Performance 67405 Adjustable Rear Toe Control Arm, please refer to the documentation included with your purchase or visit the official SPC Performance webזייטל. גאַראַנטיע טערמינען און באדינגונגען קענען זיין אַנדערש.

For technical support, installation assistance, or any product-related inquiries, please contact SPC Performance customer service directly. Contact information can typically be found on their official webזייטל אדער פּראָדוקט פּאַקאַדזשינג.