Mount-It! MI-1882BLK

Mount-It! MI-1882BLK צווייענדיק מאָניטאָר טיש מאָונט ינסטרוקציע מאַנואַל

הקדמה

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Mount-It! MI-1882BLK Dual Monitor Desk Mount. Designed for monitors ranging from 13 to 32 inches and supporting up to 17.6 lbs per arm, this mount offers full motion adjustability to enhance your workspace ergonomics and efficiency. Please read all instructions carefully before assembly and use.

Mount-It! MI-1882BLK Dual Monitor Desk Mount with two monitors attached to a desk via C-clamp.

Image: The Mount-It! MI-1882BLK Dual Monitor Desk Mount, shown with two monitors mounted, illustrating its sleek design and space-saving capabilities.

זיכערקייַט אינפֿאָרמאַציע

סעטאַפּ און ינסטאַלירונג

שרייַבטיש קאָמפּאַטיביליטי

This monitor mount is compatible with desks between 0.4 inches (10mm) and 1.97 inches (50mm) thick.

מאַונטינג אָפּציעס

The MI-1882BLK offers two installation methods: C-clamp and Grommet base.

דיאַגראַם וואָס ווייַזט C-clamp and grommet mounting options for the dual monitor desk mount.

Image: Illustration of the C-clamp and grommet mounting options, detailing how the mount attaches to desks of varying thicknesses.

C- קלamp ייַנמאָנטירונג

  1. צוטשעפּען די C-clamp bracket to the main pole.
  2. Position the mount at the desired location on your desk edge.
  3. פאַרשטייַפן די C-קלamp screw until the mount is securely fastened to the desk.

ינסטאַלירונג פון גראָממע באַזע

  1. If your desk has an existing grommet hole, ensure it is between 0.4"-2.4" (10-60mm) in diameter and the desk thickness is 0.4"-1.6" (10-40mm). If not, drill a 3/8" (10mm) hole in your desired location.
  2. Assemble the grommet base components as per the included hardware instructions.
  3. Insert the grommet bolt through the desk hole from underneath.
  4. Attach the main pole to the grommet bolt on top of the desk and tighten the hand knob from underneath until secure.

Attaching Monitors

This mount supports VESA 75x75mm and 100x100mm patterns.

  1. Attach the VESA plate to the back of each monitor using the appropriate screws and washers provided. Ensure a secure fit without overtightening.
  2. Slide the VESA plates onto the ends of the monitor arms.
  3. Secure the monitors by tightening the knob on the height adjustment peg.

ייַנמאָנטירונג ווידעא

Video: A general

פֿאַרבונדענע דאָקומענטן - MI-1882BLK

Preview Mount-It! MI-8752BLK צווייענדיק מאָניטאָר טיש מאָונט ינסטאַלירונג מאַנואַל
דעטאַלירטע אינסטאַלאַציע פירער פֿאַר די Mount-It! MI-8752BLK דואַל מאָניטאָר טיש מאָונט. כולל זיכערהייט וואָרענונגען, טיילן רשימה, דימענסיעס, וואָג קאַפּאַציטעט, שריט-פֿאַר-שריט פֿאַרזאַמלונג אינסטרוקציעס פֿאַר CL.amp and grommet mounting, cable management, and support contact information.
Preview Mount-It! MI-4752 / MI-4752WHT פול באוועגונג צווייענדיק מאָניטאָר טיש מאָונט באַניצער מאַנואַל
אן אויספירלעכער באַניצער מאַנואַל פֿאַר די Mount-It! MI-4752 און MI-4752WHT פול-באַוועגונג צוויי-מאָניטאָר טיש מאַונטס. כולל פֿאַרזאַמלונג אינסטרוקציעס, טיילן רשימה, דימענסיעס, וואָג קאַפּאַציטעט, און אַדזשאַסטמאַנט גיידס פֿאַר אָפּטימאַל סעטאַפּ און נוצן.
Preview מאָונט-איט! צוויי-מאָניטאָר טיש מאָונט ינסטאַלירונג גייד
אן אויספירלעכע אינסטאַלאַציע פירער פֿאַר די MOUNT-IT! צוויי-מאָניטאָר טיש מאָונט (מאָדעל MI-2781). גיט שריט-פֿאַר-שריט אינסטרוקציעס פֿאַר פֿאַרזאַמלונג, אַרייַנגערעכנט אויספּאַקן, זיכערהייט מיטלען, געוויכטיקטע און גראָמעט באַזע אינסטאַלאַציע, אָרעם אַטאַטשמענט, VESA פּלאַטע מאָונטינג, מאָניטאָר מאָונטינג, און לעצטע אַדזשאַסטמאַנץ פֿאַר טילט און לעוועלינג. כולל אַ דיטיילד טיילן רשימה און מכשירים פארלאנגט.
Preview מאָונט-איט! MI-792 צווייענדיק מאָניטאָר טיש שטאַנד ינסטאַלירונג אינסטרוקציעס
דעטאַלירטע אינסטאַלאַציע גייד פֿאַר די MOUNT-IT! MI-792 צוויי-מאָניטאָר טיש שטאַנד, וואָס דעקט אויספּאַקן, טיילן רשימה, באַזע מאָנטירונג, אָרעם אינסטאַלאַציע, מאָניטאָר אַטאַטשמענט, אַדזשאַסטמאַנץ און דראָט פאַרוואַלטונג.
Preview Mount-It! MI-2752 Dual Monitor Desk Mount Installation Guide
Comprehensive installation instructions for the Mount-It! MI-2752 dual monitor desk mount. Learn how to safely and securely attach your monitors to the desk using desk clamp or grommet base options.
Preview Mount-It! MI-2757 Freestanding Monitor Arm Installation Manual
Comprehensive installation manual for the Mount-It! MI-2757 Freestanding Monitor Arm with Height Adjustment. Includes parts list, safety warnings, and step-by-step assembly instructions.