LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor User Manual

1. הקדמה

Thank you for choosing the LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new LED spotlight. Please read these instructions carefully before installation and retain them for future reference.

2. זיכערקייַט אינפֿאָרמאַציע

• עלעקטריקאַל זיכערקייַט: די אינסטאַלאַציע מוז דורכגעפירט ווערן דורך אַ קוואַליפֿיצירטן עלעקטריקער לויט אַלע לאָקאַלע און נאַציאָנאַלע עלעקטרישע קאָודן. זיכערט זיך אַז די מאַכט צושטעל איז אָפּגעטיילט איידער די אינסטאַלאַציע, וישאַלט אָדער רעפּאַראַטור.
• Voltage: This product operates on 220 Volts. Verify your power supply matches this requirement.
• IP65 שאַץ: The spotlight is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.
• היץ: Do not cover the spotlight during operation, as this may cause overheating.
• ניט-דימאַבלע: This LED spotlight is non-dimmable. Do not connect it to a dimmer switch.
• ליכט מקור: The LED light source is not replaceable. If the light source fails, the entire luminaire must be replaced.

3. פּעקל אינהאַלט

ביטע טשעקן דעם פּעקל צו זיכער מאַכן אַז אַלע קאָמפּאָנענטן זענען פאַראַן:

• LEDVANCE 17W 2400LM LED Spotlight unit
• מאָונטינג קלאַמער
• Screws and wall anchors (may vary by region)
• ינסטראַקשאַנז מאַנואַל

4. סעטאַפּ און ייַנמאָנטירונג

גיי די סטעפּס פֿאַר געהעריק ינסטאַלירונג:

4.1 פאַר-ינסטאַלירונג

• מאַכט אַוועק: זיכער מאַכן אַז די הויפּט מאַכט צושטעל צו דער אינסטאַלאַציע געגנט איז אויסגעלאָשן ביים קרייַז ברעאַקער.
• אָרט סעלעקציע: Choose a suitable outdoor location for the spotlight. Consider the desired coverage area for the light and the effective range of the motion and light sensors. Ensure the mounting surface is sturdy enough to support the fixture.
• Dimensions Check: Refer to the product dimensions to ensure adequate space for installation.

This diagram illustrates the physical dimensions of the LEDVANCE LED Spotlight. The front view shows a width of 157 mm, and the side view shows a height of 183 mm and a depth of 56.5 mm, providing crucial measurements for installation planning.

4.2 מאַונטינג

1. Position the mounting bracket on the desired surface and mark the drilling points.
2. Drill holes at the marked positions and insert wall anchors if necessary.
3. באַפֿעסטיקן די מאַונטינג קלאַמער צו דער ייבערפלאַך מיט די צוגעשטעלטע שרויפֿן.
4. Attach the LED spotlight unit to the mounting bracket, ensuring it is firmly secured. Adjust the angle of the spotlight as needed.

4.3 וויירינג

• Connect the spotlight's electrical wires to your mains power supply (220V). Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations.
• Properly insulate all connections to prevent short circuits and ensure safety.
• אַמאָל די וויירינג איז פֿאַרטיק און זיכער, צוריקשטעלן די מאַכט צום קרייַז.

This image displays the product packaging for the LEDVANCE Floodlight Sensor, highlighting key features such as 17W power, 2400 lumens, IP65 rating, 5-year guarantee, 4000K color temperature, and motion/light sensor capabilities. It also shows the product's model number and various certifications.

5. אַפּערייטינג ינסטרוקטיאָנס

The LEDVANCE spotlight is designed for automatic operation based on its integrated motion and light sensors.

• Light Sensor (Dusk-to-Dawn): The integrated light sensor detects ambient light levels. The spotlight will automatically activate when the ambient light falls below a certain threshold (e.g., at dusk) and deactivate when sufficient light is present (e.g., at dawn).
• באַוועגונג סענסאָר: The motion sensor detects movement within its detection range. When motion is detected, the spotlight will illuminate for a set duration. After the motion ceases and the set time expires, the light will turn off, provided the ambient light level is above the threshold set by the light sensor.
• אַדזשאַסטמאַנץ: While specific adjustment controls are not detailed, some models may feature adjustable settings for motion sensitivity, light threshold, and illumination duration. Refer to any labels on the fixture itself for potential adjustment dials.

6. וישאַלט

The LEDVANCE spotlight requires minimal maintenance.

• רייניקונג: Periodically clean the surface of the spotlight and the sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the sensor.
• דורכקוק: Regularly inspect the fixture for any signs of damage, loose wiring, or corrosion. Address any issues promptly.
• קיין באַניצער-סערוויסאַבלע פּאַרץ: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the unit yourself.

7. טראָובלעשאָאָטינג

If you encounter issues with your LEDVANCE spotlight, refer to the following common problems and solutions:

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

This LEDVANCE spotlight comes with a 5 יאָר וואָראַנטי פון די דאַטע פון ​​קויפן. די וואָראַנטי קאָווערס חסרונות אין מאַטעריאַלס און ווערקמאַנשיפּ אונטער נאָרמאַל נוצן.

For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the LEDVANCE customer service directly. Keep your proof of purchase for warranty validation.