AQQA DC Aquarium Water Pump (Model AQ169)

1. הקדמה

Thank you for choosing the AQQA DC Aquarium Water Pump. This manual provides essential information for the safe and efficient operation of your pump. Designed for versatility, this pump is suitable for various aquatic environments, including freshwater and saltwater aquariums, ponds, fountains, and hydroponic systems. Its smart control features, quiet operation, and durable design ensure reliable performance.

Image 1: AQQA DC Aquarium Water Pump, showing the pump unit, external controller, and two interchangeable nozzles.

2. זיכערקייַט אינפֿאָרמאַציע

ביטע ליינט אלע זיכערהייט אינסטרוקציעס קערפול איידער איר ניצט די פאמפע. נישט נאכפאלגן די אינסטרוקציעס קען רעזולטירן אין עלעקטרישע שאק, פייער, אדער ערנסטע שאדן.

• שטענדיק אָפּשטעקן די מאַכט צושטעל איידער איר דורכפירן קיין וישאַלט, ינסטאַלירונג אָדער רייניקונג.
• Ensure the pump is fully submerged in water during operation to prevent dry burning and damage.
• ניצ נישט די פּאָמפּע אויב דער עלעקטרישער שנור אדער פּלאָג איז געשעדיגט.
• This pump is designed for indoor use in aquatic environments only. Do not use it for purposes other than those specified.
• האַלטן אויס פון דערגרייכן פון קינדער.
• The pump operates on a 12V DC low-voltage output, reducing shock risks. However, always handle electrical components with care.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין דיין פּעקל:

• 1 x AQQA DC Aquarium Water Pump
• 1 x עקסטערנער קאָנטראָללער
• 2 x Interchangeable Nozzles (6/8mm and 10/12mm)
• 1 x Power Cord (approximately 10.83 ft)
• 1 x ינסטרוקטיאָן מאַנואַל

4. פּראָדוקט איבערview

The AQQA DC Aquarium Water Pump is a compact and efficient submersible pump featuring an external controller for easy operation.

Pump Unit Features:

• סאַבמערסיבלע פּלאַן: IP68 waterproof rating for continuous underwater operation.
• שטיל אָפּעראַציע: Pure copper motor ensures low noise levels (<30dB).
• סאַקשאַן קאַפּס: Four strong suction cups on the base for secure placement.
• נידעריק וואַסער לעוועל פּלאַן: Capable of operating effectively at water levels as low as 1.5cm (0.59 inches), allowing for thorough drainage.
• אַנטי-טרוקן ברענען שוץ: Automatically shuts off if water levels are too low to prevent damage.

Image 2: The AQQA pump unit highlighting its anti-dry burning protection feature, which prevents damage when water levels are too low.

External Controller Features:

• ON/OFF קנעפּל: מאַכט די פּאָמפּע אָן אָדער אויס.
• Flow Adjustment Buttons (+/-): Adjusts water flow rate across 4 levels.
• FEED קנעפּל: Activates feeding mode, pausing the pump for 10 minutes.
• ינדיקאַטאָר לייץ: Display current flow rate/lift level and feeding mode status.

Image 3: Close-up of the external controller, showing the ON/OFF, flow adjustment (+/-), and FEED buttons, along with indicator lights for flow rate and feeding mode.

5. סעטאַפּ

Follow these steps to install your AQQA DC Aquarium Water Pump:

1. קלייַבן נעזל: Select the appropriate nozzle (6/8mm or 10/12mm) for your tubing system and securely attach it to the pump's outlet.
2. שטעלע פּאָמפּע: Place the pump unit at the desired location within your aquarium, pond, or water feature. Ensure it is fully submerged. The four suction cups on the base will help secure it to a clean, smooth surface.
3. קאָננעקט קאָנטראָללער: Connect the pump's cable to the external controller.
4. פאַרבינדן מאַכט: Plug the power cord from the controller into a suitable electrical outlet (110V-240V).
5. באַשטעטיקן וואַסער מדרגה: Ensure the water level is sufficient to cover the pump completely. The pump can operate at low water levels (down to 1.5cm) but full submersion is recommended for optimal performance and longevity.

Image 4: The AQQA pump demonstrating its ability to operate effectively at low water levels, with all-around suction at the bottom to remove dirt.

6. אַפּערייטינג ינסטרוקטיאָנס

The external controller provides easy access to all pump functions.

מאַכט אויף / אַוועק:

• דרוק די ON/OFF button once to turn the pump on or off.

אַדזשאַסטינג לויפן קורס:

• ניצן די + button to increase the flow rate.
• ניצן די - button to decrease the flow rate.
• There are 4 adjustable flow levels, indicated by the lights on the controller.

פידינג מאָדע:

• To activate feeding mode, press and hold the פיטער קנעפּל פֿאַר 5 סעקונדעס.
• The pump will pause for 10 minutes, allowing fish to feed without strong currents.
• After 10 minutes, the pump will automatically restart at its previous flow setting.

7. וישאַלט

Regular cleaning and maintenance will ensure the longevity and optimal performance of your pump.

1. דיסקאַנעקט מאַכט: Always unplug the pump from the power outlet before any maintenance.
2. Disassemble Pump: The pump is designed for tool-free disassembly. Gently remove the filter cover and then the impeller assembly.
3. ריין קאַמפּאָונאַנץ: Rinse all parts (impeller, filter cover, pump housing interior) under clean water. Use a soft brush to remove any accumulated debris, algae, or mineral deposits. Ensure the impeller spins freely.
4. ריאַסעמבאַל: Carefully reassemble the pump, ensuring all parts fit correctly.
5. רעגולער טשעקס: Periodically check the pump and tubing for any blockages or wear.

בילד 5: עקספּלאָדירט view of the AQQA pump, illustrating how to easily disassemble the outlet nozzle, filter cover, and motor for cleaning without tools.

8. טראָובלעשאָאָטינג

אויב איר טרעפט פּראָבלעמען מיט אייער פּאָמפּע, זעט די פאלגענדע געוויינטלעכע פּראָבלעמען און לייזונגען:

9. ספּעסאַפאַקיישאַנז

10. וואָראַנטי און שטיצן

AQQA stands behind the quality of its products. For specific warranty details and terms, please refer to the warranty information provided at the time of purchase or visit the official AQQA webפּלאַץ.

If you require technical assistance, have questions about your product, or need to report an issue, please contact AQQA customer support through the retailer where you purchased the product or via the contact information available on the official AQQA webפּלאַץ.

Please have your model number (AQ169) and purchase date ready when contacting support.