sofirn Universal Bike Flashlight Mount Instruction Manual

הקדמה

This manual provides instructions for the proper installation and use of the sofirn Universal Bike Flashlight Mount. This mount is designed to securely attach flashlights to bicycle handlebars, offering 360-degree adjustability for optimal light positioning.

Image: The sofirn Universal Bike Flashlight Mount, featuring its compact design and silicone rings.

פּעקל אינהאַלט

The sofirn Universal Bike Flashlight Mount package includes:

• 1 x Flashlight Mount Bracket
• 2 x Silicone Gel Rings (various sizes for compatibility)

בילד: דעטאַלירט view of the mount bracket and two sizes of silicone rings, along with dimensions.

סעטאַפּ און ינסטאַלירונג

1. צוגרייטן דעם באַרג: Take the main mount bracket and the appropriate size silicone gel rings.
2. Attach Rings to Mount: Loop one silicone gel ring through the top slot of the mount bracket and the other through the bottom slot. Ensure they are securely seated.
3. Mount to Handlebar: Position the mount on your bicycle handlebar. Wrap one silicone gel ring around the handlebar and hook it onto the opposite side of the mount. Repeat with the second ring for added stability. The mount is compatible with handlebars and flashlights with a diameter range of 10-40mm.
   

   Image: The mount securely attached to a bicycle handlebar, holding a flashlight, illustrating its rotational feature.
4. Attach Flashlight: Place your flashlight into the cradle of the mount. Wrap the remaining silicone gel rings around the flashlight and hook them onto the corresponding pegs on the mount. Ensure the flashlight is held firmly.
   

   Image: Visual guide demonstrating the attachment of silicone rings to the mount, then securing the mount to a handlebar and a flashlight to the mount.

אַפּערייטינג ינסטראַקשאַנז

Adjusting the Angle (360-Degree Rotation)

The sofirn Universal Bike Flashlight Mount features a 360-degree adjustable design, allowing you to direct your flashlight beam precisely where needed.

1. Loosen the Screw: Locate the small screw on the side of the mount. Using a suitable screwdriver (not included), slightly loosen this screw. Do not remove it completely.
2. Rotate the Top Section: Once the screw is loosened, the top section of the mount can be rotated freely to your desired angle.
3. פֿעסטציען די שרויף: After adjusting the angle, tighten the screw firmly to secure the mount in position.

Image: Illustration of the 360-degree adjustment mechanism, highlighting the screw to loosen for rotation.

Quick Attach and Release

The silicone gel rings allow for quick attachment and removal of your flashlight from the mount. Simply unhook the rings from the flashlight to detach it, and re-hook them to secure it again.

Image: The mount demonstrating compatibility with angle-head flashlights.

וישאַלט

To ensure the longevity and optimal performance of your sofirn Universal Bike Flashlight Mount, follow these general maintenance guidelines:

• רייניקונג: Wipe the mount and silicone rings with a damp שטאָף צו באַזייַטיקן שמוץ און דעבריס. ויסמיידן האַרב קעמיקאַלז.
• דורכקוק: Periodically inspect the silicone rings for signs of wear, tears, or degradation. Replace them if necessary to maintain secure attachment.
• שרויף טייטנאַס: Occasionally check the tightness of the adjustment screw to ensure it remains secure, especially after frequent adjustments or riding on rough terrain.

טראָובלעשאָאָטינג

No specific troubleshooting steps are provided by the manufacturer for this product. However, if you encounter issues, consider the following:

• Flashlight or Mount Slipping:
  • Ensure the silicone rings are correctly looped and securely hooked.
  • Verify that the chosen silicone rings are the appropriate size for your handlebar and flashlight diameter (10-40mm).
  • Clean the handlebar and flashlight surfaces to remove any grease or dirt that might reduce friction.
• Difficulty Adjusting Angle:
  • Ensure the adjustment screw is sufficiently loosened before attempting to rotate the top section.
  • Avoid over-tightening the screw, as this can strip the threads or damage the plastic.
• Mount Damage:
  • If the mount appears damaged, especially at connection points, discontinue use to prevent loss of your flashlight during rides.
  • Refer to the warranty information for potential replacement options.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

וואָראַנטי אינפֿאָרמאַציע

The sofirn Universal Bike Flashlight Mount comes with a איין יאָר וואָראַנטי from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.

קונה שטיצן

For warranty claims, technical assistance, or any questions regarding your sofirn product, please contact sofirn customer support through their official webפּלאַץ אָדער די זיצער ווו די פּראָדוקט איז פּערטשאַסט.