MILESEEY D5-APP-US Laser Measuring Tool User Manual

1. פּראָדוקט איבערview

The MILESEEY D5-APP-US is a high-precision laser distance meter designed for various measurement tasks. It features smart app connectivity, an electronic angle sensor, and multiple measurement modes for efficiency and accuracy.

Figure 1: MILESEEY D5-APP-US Laser Measuring Tool and included accessories. The package contains the laser measure, a portable bag, a portable bracelet, a user manual, and 2 x 1.5V AAA batteries.

2. סעטאַפּ

2.1 באַטאַרייע ייַנמאָנטירונג

The device requires 2 x 1.5V AAA alkaline batteries. Ensure correct polarity when inserting the batteries into the compartment located on the back of the device.

2.2 מאַכט אויף / אַוועק

צו מאַכט אויף די מיטל, דריקן די MEAS button. The laser will stand by for measurement. To power off, long-press the אַוועק / קלאָר button. The device will automatically shut off after 180 seconds of inactivity to conserve power.

2.3 איינהייט סוויטשינג

To switch measurement units (M/FT/IN), long-press the UNIT button. The device supports various units including meters, feet, inches, and fractional inches. For area and volume measurements, only m² / m³ and ft² / ft³ are available.

Figure 2: Instructions for changing measurement units and setting reference points. Long-press the UNIT button to cycle through units (m, ft, in, ft+in). Short-press the UNIT button to change the reference point between front and back.

2.4 רעפערענץ פונקט איינשטעלונג

The default reference point is the end of the device. To change the reference point (front or back), short-press the UNIT button. This is crucial for accurate measurements depending on where the device is placed.

2.5 Buzzer On/Off

To turn the buzzer sound on or off, long-press the sound button. A speaker icon with a cross will appear on the display when the buzzer is off.

2.6 Smart APP Connectivity

The MILESEEY D5-APP-US syncs with the "Smart Life" app for real-time data transfer and storage of up to 1000 sets. The app allows you to create 2D floor plans or annotate images with measurements.

Figure 3: The laser measuring tool connected to the Smart Life app, showing real-time data transfer and storage capabilities.

Figure 4: The Smart Life app allows users to draw on pictures or create hand-drawn floor plans with integrated measurements.

3. אַפּערייטינג מאָדעס

3.1 איין מעזשערמאַנט

דרוק די MEAS button once to activate the laser. Press it again to take a single distance measurement. The result will be displayed on the screen.

3.2 קעסיידערדיק מעאַסורעמענט

לאנג דריקן די MEAS button for 2-3 seconds to enter continuous measurement mode. The device will continuously measure and display the maximum, minimum, and current values. Short-press MEAS again to stop and display the final data.

3.3 שטח מעזשערמאַנט

דרוק די מאָדע button until the area icon appears. Take two consecutive measurements (length and width). The device will automatically calculate and display the area.

3.4 באנד מעזשערמאַנט

דרוק די מאָדע קנעפּל ביז די באַנד בילדל דערשיינט. נעמט דריי קאָנסעקוטיווע מעסטונגען (לענג, ברייט און הייך). די דעווייס וועט אויטאָמאַטיש רעכענען און ווייַזן די באַנד.

3.5 Pythagorean Measurement (Indirect Length)

The device supports 2-point and 3-point Pythagorean measurements for indirect length calculations. Press the מאָדע button until the desired Pythagorean icon appears. Follow the on-screen prompts to take the required measurements. For best accuracy, especially with handheld measurements, using a tripod is recommended.

3.6 צוגאב און סובטראַקציע

To add or subtract measurements, take the first measurement, then press the + or - button. Take the next measurement, and the result of the operation will be displayed. This function can be used for length, area, and volume calculations.

3.7 Electronic Angle Sensor

The device features an advanced electronic angle sensor that provides real-time angle display. This allows for faster and more accurate measurements compared to traditional bubble levels, especially for indirect height and distance calculations.

Figure 5: The electronic angle sensor provides real-time angle display, enhancing accuracy for various measurements.

4. וישאַלט

4.1 Accuracy Check

To check the accuracy of the measuring tool, select a permanently unchangeable indoor measuring section (approx. 9.8 to 32 ft or 3 to 10 m long) with weak backlighting and a smooth, reflective target area (e.g., a white-painted wall). Measure the distance 10 times in succession. The deviation of individual measurements from the average value must not exceed ±0.12 in (±2 mm). Record these measurements to compare accuracy at a later date.

4.2 אַלגעמיינע קער

Keep the device clean and dry. Avoid exposing it to extreme temperatures or direct sunlight for extended periods. The device has an IP54 rating, indicating protection against dust and splashing water, but it is not fully waterproof.

Figure 6: The device features an IP54 rating for dust and splash resistance.

5. טראָובלעשאָאָטינג

The device displays error codes for various issues. Refer to the table below for common error codes and their corrective measures.

6. ספּעסאַפאַקיישאַנז

7. וואָראַנטי & שטיצן

The MILESEEY D5-APP-US Laser Measuring Tool comes with a 2-year warranty. For technical support or warranty claims, please refer to the contact information provided in the product packaging or on the official MILESEEY webפּלאַץ.