BRIKSMAX Light Kit for Lego Poinsettia 10370

1. הקדמה

This instruction manual provides detailed guidance for installing and operating your BRIKSMAX LED Light Kit, designed specifically for the Lego Icons Poinsettia set (model 10370). This kit enhances your Lego model with innovative lighting effects, bringing it to life. Please note that the Lego Poinsettia set itself is not included with this light kit.

Image 1.1: The BRIKSMAX Light Kit illuminating the Lego Poinsettia set.

2. זיכערקייַט גיידליינז

• ווארענונג פֿאַר קליין טיילן: This kit contains small parts that may pose a choking hazard. Keep out of reach of small children.
• עלעקטריקאַל זיכערקייַט: Ensure all connections are secure before powering on. Do not expose the components to water or excessive moisture.
• מאַכט מקור: Use only the recommended power source (5V DC). Do not use power sources with higher voltage.
• האַנדלינג: Handle LED lights and wires carefully to avoid damage. Do not bend wires sharply.
• באַטערי נוצן: If using a battery box (not included), ensure batteries are inserted correctly according to polarity markings. Do not mix old and new batteries or different types of batteries.

3. פּעקל אינהאַלט

Verify that all components listed below are present in your BRIKSMAX Light Kit package:

• געפירט ליכט קיט קאָמפּאָנענטן
• ינסטראַקשאַנז מאַנואַל
• וסב קאַבלע

בילד 3.1: איבערview of the BRIKSMAX Light Kit components and packaging.

4. ינסטאַללאַטיאָן גייד

Follow these steps to integrate the light kit with your Lego Poinsettia 10370 set. It is recommended to have your Lego set fully assembled before beginning the light kit installation.

1. Prepare Your Lego Set: Carefully disassemble any sections of your Lego Poinsettia model as indicated in the light kit's specific instruction manual to allow for wire routing and light placement.
2. ינסטאַלירן געפירט לייץ: Place the individual LED lights into the designated areas of your Lego model. The instruction manual included in your kit will show precise locations for each light.
3. רוט דראָטן: Carefully route the connecting wires between Lego bricks. Ensure wires are not pinched or excessively bent. Use the provided connection points or small gaps in the bricks to hide wires for a clean appearance.
4. פֿאַרבינדן קאָמפּאָנענטן: Connect the individual LED lights to the main circuit board or expansion boards as per the instructions. Ensure all connectors are firmly seated.
5. Reassemble Lego Sections: Once all lights and wires are in place, carefully reassemble the disassembled Lego sections. Double-check that no wires are caught or damaged during reassembly.
6. פאַרבינדן מאַכט: Connect the USB cable to the light kit's power input. You can then connect the USB cable to a 5V USB power adapter (not included) or a USB power bank (not included).

בילד 4.1: דעטאַלירט view of installed LED lights within the Lego Poinsettia model.

5. אַפּערייטינג ינסטרוקטיאָנס

Once the light kit is fully installed and connected to a power source, operation is straightforward:

• מאַכט אויף: Connect the USB cable to a compatible 5V USB power source. The lights should illuminate automatically.
• מאַכט אַוועק: Disconnect the USB cable from the power source to turn off the lights.
• Brightness/Effect Control (if applicable): Some kits may include a control module for adjusting brightness or light effects. Refer to your specific kit's instruction manual for details on these features.

Image 5.1: Visual comparison of the Lego Poinsettia set with the light kit off versus on.

6. קער און וישאַלט

To ensure the longevity and optimal performance of your BRIKSMAX Light Kit, follow these care guidelines:

• רייניקונג: Use a soft, dry cloth to gently wipe dust from the lights and wires. Do not use liquid cleaners or abrasive materials.
• סטאָרידזש: If disassembling the kit for storage, carefully disconnect components and store them in a dry, cool place away from direct sunlight.
• האַנדלינג: Avoid pulling on wires or connectors forcefully. Always grasp the connector housing when connecting or disconnecting.

7. טראָובלעשאָאָטינג

If you encounter any issues with your light kit, refer to the following common problems and solutions:

• לייץ נישט אויסגעדרייט אויף:
  • Ensure the USB cable is securely connected to both the light kit and the power source.
  • Verify that the power source (USB adapter/power bank) is functioning correctly and providing 5V DC output.
  • Check for any loose connections between the individual lights and the main circuit board.
• עטלעכע לעמפּלעך אַרבעטן נישט:
  • Inspect the specific non-working light and its connections for any damage or dislodgement.
  • Ensure the wire for that light is not pinched or cut.
• פליקערינג ליכט:
  • Check the stability of your power source. An unstable power supply can cause flickering.
  • Ensure all connections are firm and not loose.

8. פּראָדוקט ספּעסאַפאַקיישאַנז

9. קונה שטיצע און גאַראַנטיע

BRIKSMAX is committed to providing high-quality products and excellent customer service. If you encounter any issues, have questions, or require assistance with your light kit, please contact our support team.

• געשעדיגטע אדער פעלנדיקע טיילן: In the event of damaged or missing components upon arrival, please contact us immediately for a replacement.
• טעכניש הילף: For installation guidance or troubleshooting, our support team is available to help.
• וואָראַנטי: While specific warranty periods may vary, BRIKSMAX products are manufactured with reliable materials. Please retain your proof of purchase for any warranty claims.

For further assistance, please visit the official BRIKSMAX store or contact customer service through your purchase platform.