RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. פּראָדוקט איבערview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

פיגורע 1.1: איבערview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. זיכערקייַט אינפֿאָרמאַציע

• ווארענונג: ריזיקע פון ​​עלעקטרישן קלאַפּ. אָפּשטעקן די מאַכט ביים פיוז אָדער קרייַז ברעאַקער איידער ינסטאַלירונג אָדער סערוויסינג.
• Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
• ענשור די צושטעלן וואָלtage is correct for the fixture (120-277V).
• Do not handle energized fixture with wet hands.
• דו זאלסט נישט ינסטאַלירן לעבן ברענעוודיק מאַטעריאַלס.
• This fixture is intended for indoor use only.

3. סעטאַפּ און ייַנמאָנטירונג

3.1. פאַר-ינסטאַלירונג

• אויספּאַקן דעם פֿיקסטשור און קאָנטראָלירן פֿאַר קיין שעדיקן.
• Ensure all necessary components are present (LED Fixture).
• Turn off power at the circuit breaker before beginning installation.

3.2. מאַונטינג די פיקסטשער

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

פיגורע 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. עלעקטריקאַל וויירינג

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

פיגורע 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. אַפּערייטינג ינסטרוקטיאָנס

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

פיגורע 4.1: נאָענט-אַרויף view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• אויסקלייַבן איינער פון די פאלגענדע סעטטינגס: 40 וו, 50 וו, אָדער 60 וו.
• Ensure power is disconnected before adjusting this switch.

4.2. קאָליר טעמפּעראַטור אַדזשאַסטמאַנט (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• אויסקלייַבן איינער פון די פאלגענדע סעטטינגס: 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. דימאַבלע פונקציאָנאַליטעט

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. וישאַלט

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• רייניקונג: אָפּשטעקן די מאַכט איידער איר רייניגט. ניצט אַ ווייכן, טרוקענעם, אָדער אַ ביסל ווייכןamp א שטאָף צו ווישן די אויסערלעכע זייט פון דער לײַכטערונג. ניצט נישט קיין שרײַבנדיקע רייניגערס אדער סאָלווענטן.
• LEDs: The integrated LED light source is designed for long life and does not require replacement.

6. טראָובלעשאָאָטינג

אויב די פֿיקסטשור אַרבעט נישט ווי געריכט, זעט די פֿאָלגנדיקע געוויינטלעכע פּראָבלעמען און לייזונגען:

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support.

7. ספּעסאַפאַקיישאַנז

8. וואָראַנטי אינפֿאָרמאַציע

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך. האלט אייער באווייז פון קויפן פאר גאראנטיע פארלאנגען.

9. קונה שטיצן

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Webפּלאַץ: www.rablighting.com
• אָפּשיקן צו די website for current contact information, including phone numbers and email support.