1. פּראָדוקט איבערview

The YESWELDER ARC-125D PRO is a compact and portable mini inverter welding machine designed for both MMA (Manual Metal Arc, also known as Stick welding) and Lift TIG (Tungsten Inert Gas) welding processes. It features an intelligent LED display for clear visibility of welding parameters and incorporates advanced technologies such as Hot Start, Arc Force, Anti-Stick, and VRD (Voltage Reduction Device) for enhanced performance and safety.

Image 1.1: The YESWELDER ARC-125D PRO Mini Inverter Welder shown with its included ground clamp and electrode holder.

שליסל פֿעיִקייטן:

• 2-אין-1 וועַלדינג מאָדעס: Supports both MMA (Stick) and Lift TIG welding for versatile applications.
• גרויס געפירט ווייַז: Provides clear and easy-to-read information on current, electrode size, function mode, and welding mode.
• Advanced Welding Functions: Equipped with Hot Start, Arc Force, Anti-Stick, and VRD for improved arc ignition, stability, and safety.
• פּאָרטאַטיוו פּלאַן: Compact dimensions (23.6 x 9.4 x 13 cm) and lightweight (approximately 2 kg) for easy transport and storage.
• זיכערהייט פּראַטעקשאַנז: Includes automatic compensation for voltage fluctuations, overcurrent protection, overload protection, and temperature control.

2. זיכערקייַט אינפֿאָרמאַציע

Welding operations involve significant risks. Always prioritize safety to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.

אַלגעמיינע זיכערקייַט פּריקאָשאַנז:

• פערזענלעכע פּראַטעקטיוו עקוויפּמענט (PPE): Always wear appropriate PPE, including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
• ווענטילאַטיאָן: Ensure adequate ventilation to remove welding fumes and gases, which can be hazardous to health.
• פייער פאַרהיטונג: Keep a fire extinguisher nearby. Remove all flammable materials from the welding area. Be aware of sparks and hot slag.
• עלעקטריקאַל זיכערקייַט: Ensure the welding machine is properly grounded. Do not operate in wet conditions. Inspect cables and connections for damage before each use.
• אויג און הויט שוץ: Welding arc rays can cause severe burns to eyes and skin. Never look at the welding arc without proper eye protection.
• אַרבעט שטח: Keep the work area clean, dry, and free of clutter. Ensure stable footing.
• קינדער און צוקוקער: האַלט קינדער און נישט-אויטאָריזירטע פּערסאָנעל אַוועק פֿון דער שווייס געגנט.

די VRD (Voltage Reduction Device) function is designed to reduce the open-circuit voltage to a safe level when the machine is not actively welding, minimizing the risk of electric shock. Always ensure this feature is active unless specific welding conditions require its deactivation (refer to operating instructions).

3. קאָמפּאָנענטן און קאָנטראָלן

Familiarize yourself with the components and control panel of your YESWELDER ARC-125D PRO welding machine.

אַרייַנגערעכנט קאַמפּאָונאַנץ:

• YESWELDER ARC-125D PRO Mini Inverter Welder
• ערד קלamp מיט קאַבלע
• Electrode Holder with Cable
• באַניצער מאַנואַל

קאָנטראָל פּאַנעל הקדמה:

בילד 3.1: פאָרנט און הינטן view of the ARC-125D PRO, highlighting control panel elements and connections.

1. Parameter Button (PARAM): Used to cycle through adjustable parameters such as Hot Start and Arc Force.
2. Welding Mode Button (MODE): Toggles between MMA (Stick) and Lift TIG welding modes.
3. VRD Button (VRD ON/OFF): Activates or deactivates the Voltage Reduction Device.
4. דיגיטאַל ווייַז: Shows current settings, selected mode, and other operational information.
5. Value Knob: Adjusts the welding current or other selected parameters.
6. פּאָזיטיווער אַרויסגאַנג טערמינאַל (+): Connects to the electrode holder for MMA or TIG torch for Lift TIG.
7. נעגאַטיווער אַרויסגאַנג טערמינאַל (-): פֿאַרבינדט זיך צום ערד־קלאַסamp.
8. Input Power Cable: Connects the machine to the 230V AC power supply.
9. מאַכט סוויטש: Turns the welding machine ON or OFF.
10. פאָכער: Provides cooling for the internal components during operation.

4. סעטאַפּ

א ריכטיגע אויפשטעל איז קריטיש פאר זיכערע און עפעקטיווע שווייסן. פאלגט די טריט איידער איר הייבט אן יעדע שווייסן אויפגאבע.

4.1 מאַכט קאַנעקשאַן:

• Ensure the welding machine's power switch is in the OFF position.
• Connect the input power cable to a grounded 230V AC power outlet. Verify that the power supply meets the machine's requirements.

4.2 Connecting Welding Cables:

1. ערד קלamp: פאַרבינדן די ערד קלamp cable to the Negative Output Terminal (-) on the front panel. Securely attach the ground clamp to the workpiece or a clean, bare metal part of the welding table, ensuring good electrical contact.
2. עלעקטראָד האָלדער (פֿאַר MMA): Connect the electrode holder cable to the Positive Output Terminal (+) on the front panel.
3. TIG Torch (for Lift TIG): For Lift TIG welding, connect your TIG torch (not included) to the Positive Output Terminal (+). Ensure the TIG torch has a gas valve for manual gas control.

Always ensure all connections are tight and secure before powering on the machine.

5. אַפּערייטינג ינסטרוקטיאָנס

This section details the operation of the YESWELDER ARC-125D PRO for both MMA and Lift TIG welding modes.

5.1 MMA (Stick) Welding:

1. מאַכט אויף: Turn on the welding machine using the Power Switch. The LED display will illuminate.
2. Select MMA Mode: Press the MODE button until "Stick" or "MMA" is indicated on the digital display.
3. Insert Electrode: Securely insert the appropriate electrode (e.g., E6011, E6013, E6010, E7018 up to 3.18mm) into the electrode holder.
4. אַדזשאַסטירן קראַנט: Use the Value Knob to set the desired welding current (Amperage) based on the electrode type and material thickness.
5. Adjust Parameters (Optional): Press the PARAM button to cycle through Hot Start and Arc Force settings. Use the Value Knob to adjust these values as needed for optimal arc ignition and stability.
6. VRD Function: Ensure the VRD is ON for maximum safety, especially in damp environments or when working at height.
7. Begin Welding: Strike the arc by lightly touching the electrode to the workpiece and quickly lifting it slightly to establish the arc. Maintain a consistent arc length and travel speed.

בילד 5.1: עקס.ample of Stick welding in progress.

5.2 Lift TIG Welding:

For Lift TIG welding, a TIG torch with a gas valve and a separate gas cylinder (Argon) are required (not included).

1. מאַכט אויף: צינד אן די וועַלדינג מאַשין.
2. Select Lift TIG Mode: Press the MODE button until "Lift TIG" is indicated on the digital display.
3. Connect TIG Torch: Ensure your TIG torch is connected to the Positive Output Terminal (+) and the gas hose is connected to your Argon gas cylinder.
4. Prepare Tungsten Electrode: Install a sharpened tungsten electrode into the TIG torch.
5. אַדזשאַסטירן קראַנט: Use the Value Knob to set the desired welding current.
6. עפֿענען גאַז ווענטיל: Open the gas valve on the TIG torch to establish gas flow.
7. Initiate Arc (Lift Arc): Gently touch the tungsten electrode to the workpiece. A small current will flow. Slowly lift the torch to establish the arc. The machine will automatically increase the current to the set value.
8. Perform Welding: Maintain a consistent arc length and feed filler rod manually if required.
9. Terminate Arc: To stop welding, simply lift the torch away from the workpiece. Close the gas valve on the TIG torch after welding.

בילד 5.2: עקס.ample of Lift TIG welding in progress.

6. וישאַלט

רעגולערע אויפהאלטונג גאראנטירט די לאנגעוויטי און זיכערע אפעראציע פון ​​אייער שווייס מאשין.

אַלגעמיינע וישאַלט עצות:

• רייניקונג: Periodically clean the machine's exterior with a dry, soft cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
• קאַבלע דורכקוק: Regularly inspect all welding cables, connections, and the power cord for cuts, fraying, or damage. Replace damaged components immediately.
• טערמינאַל קאַנעקשאַנז: Ensure all output terminals are clean and connections are tight. Loose connections can cause overheating and poor performance.
• סטאָרידזש: Store the welding machine in a clean, dry environment, away from excessive dust, moisture, and corrosive materials.
• פאָכער אָפּעראַציע: Ensure the cooling fan is not obstructed and operates freely during use.

7. טראָובלעשאָאָטינג

This section provides solutions to common issues you might encounter during operation.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact YESWELDER customer service.

8. ספּעסאַפאַקיישאַנז

Detailed technical specifications for the YESWELDER ARC-125D PRO Mini Inverter Welder.

Image 8.1: Technical specifications for the ARC-125D PRO.

Image 8.2: The ARC-125D PRO's compact size and light weight (2kg).

9. גאַראַנטיע און קונה שטיצע

YESWELDER is committed to providing quality products and customer satisfaction.

For any issues, questions, or concerns regarding your YESWELDER ARC-125D PRO welding machine, please refer to the contact information provided with your product packaging or visit the official YESWELDER website for support. When contacting support, please have your model number (ARC-125D PRO) and purchase details readily available.