1. פּראָדוקט איבערview
The Silverline Hardware 14-inch Modern Kitchen Cabinet Steel Pull Handles are designed to enhance the aesthetic and functionality of your cabinetry. Crafted from solid steel and zinc with a brushed satin nickel finish, these pulls offer a contemporary look and a comfortable grip. They are suitable for various cabinet styles and are engineered for durability and ease of use.
שליסל פֿעיִקייטן אַרייַננעמען:
- מאָדערן פּלאַן: Brushed Satin Nickel finish provides an elegant and contemporary appearance.
- דוראַבאַל קאַנסטראַקשאַן: Made from solid steel and zinc for long-lasting performance.
- גלאַט עדזשאַז: Designed for comfortable handling without sharp edges.
- ווערסאַטאַל אַפּלאַקיישאַן: Suitable for updating existing furniture or new cabinet installations.
2. פּעקל אינהאַלט
יעדער פּעקל כּולל די פאלגענדע זאכן:
- 10 x Silverline Hardware 14-inch Cabinet Pull Handles (Brushed Satin Nickel)
- Mounting Screws (appropriate size for standard cabinet thicknesses)
3. ספּעסאַפאַקיישאַנז
| שטריך | באַשרייַבונג |
|---|---|
| סאָרט | סילווערליין |
| מאַטעריאַל | אַללוי שטאָל, צינק |
| קאָליר | געבראַשט סאַטין ניקעל |
| סטייל | מאָדערן |
| Center to Center (Hole Spacing) | 12.6 אינטשעס (320 מם) |
| קוילעלדיק לענג | 14.09 אינטשעס (358 מם) |
| ברייט | 0.55 אינטשעס (14 מם) |
| Height (Projection) | 1.3 אינטשעס (33 מם) |
| נומער פּעקל קוואַנטיטי | 10 |
| ענדיקן | בראַשט |
4. ינסטאַלירונג אינסטרוקציעס
Follow these steps for proper installation of your cabinet pull handles.
4.1 מכשירים פארלאנגט
- מעאַסורינג טייפּ אָדער ווירע
- בלייַער אָדער מאַרקער
- בויער
- Drill Bit (appropriate size for mounting screws)
- שרויפנציהער (פיליפּס קאָפּ רעקאָמענדירט)
- Optional: Cabinet Hardware Jig for precise hole placement
4.2 ינסטאַללאַטיאָן סטעפּס
- באַשטימען אָרט: Decide on the desired location for each pull handle on your cabinet doors or drawers. Standard placement for pulls on cabinet doors is typically on the stile opposite the hinges, and centered vertically. For drawers, pulls are usually centered horizontally and vertically.
- Mark Hole Centers: Using a measuring tape or a cabinet hardware jig, accurately mark the two hole centers for each pull. The center-to-center distance for these pulls is 12.6 inches (320mm). Ensure marks are level and consistent across all installations.
- בויער פּילאָט האָלעס: Select a drill bit slightly smaller than the diameter of the mounting screws. Carefully drill pilot holes through the marked points. Drill slowly and steadily to prevent splintering, especially on the back side of the cabinet door or drawer.
- Attach the Pull: Align the pull handle with the drilled holes. Insert the mounting screws from the inside of the cabinet door or drawer through the pilot holes and into the threaded posts of the pull handle.
- פאַרשטייַפן סקרוז: Using a Phillips head screwdriver, gently tighten the screws until the pull handle is secure. דו זאלסט נישט אָוווערטייטאַן, as this can strip the screw threads or damage the cabinet material.
- איבערחזרן: Follow these steps for all remaining cabinet pull handles.
Image: Silverline Hardware 14-inch Modern Kitchen Cabinet Steel Pull Handles installed on light gray kitchen cabinets, demonstrating typical application.
5. קער און וישאַלט
Proper care will help maintain the finish and longevity of your Silverline Hardware cabinet pulls.
- רייניקונג: רייניקן רעגולער מיט אַ ווייכן, דamp cloth. For stubborn marks, use a mild soap solution and immediately dry with a clean, soft cloth.
- ויסמיידן האַרב קלינערז: Do not use abrasive cleaners, ammonia-based products, or harsh chemicals, as these can damage the brushed satin nickel finish.
- פּעריאָדיש דורכקוק: Periodically check the tightness of the mounting screws. If any pull feels loose, gently tighten the screws with a screwdriver.
6. טראָובלעשאָאָטינג
דאָ זענען לייזונגען צו געוויינטלעכע פּראָבלעמען וואָס איר קענט באַגעגענען:
- Pull Handle is Loose: If a pull handle becomes loose, gently tighten the mounting screws from the inside of the cabinet door or drawer using a Phillips head screwdriver. Avoid overtightening.
- Screws Do Not Fit: The package includes standard screws. If your cabinet thickness requires different screw lengths, please contact Silverline Hardware customer support for assistance.
- Scratches or Finish Damage: Minor scratches may be buffed out with a very fine-grit polishing cloth designed for brushed metals. For significant damage, replacement may be necessary.
7. וואָראַנטי און שטיצן
Silverline Hardware is committed to quality and customer satisfaction. While specific warranty details are not provided in this manual, we encourage you to contact us directly for any questions or concerns regarding your product.
For support, inquiries, or to report any issues, please reach out to Silverline Hardware customer service through the retailer where the product was purchased or visit the official Silverline Hardware store online.
קאָנטאַקט אינפֿאָרמאַציע: Please refer to your purchase documentation or the Silverline Hardware brand store on Amazon for the most current contact details.
We value your feedback and are here to assist you.
