M-VAVE SK2 Isolated Guitar Pedal Power Supply

1. הקדמה

The M-VAVE SK2 is an isolated power supply unit designed for guitar effect pedals. It provides stable and low-noise power to multiple pedals simultaneously, ensuring optimal performance. This unit features independent power outputs and overcurrent protection for each channel, enhancing reliability and safety for your equipment.

Image 1.1: M-VAVE SK2 Isolated Guitar Pedal Power Supply.

2. פֿעיִקייטן

• 10 אפגעזונדערטע 9V DC אויסגאבן: Provides clean and stable power to individual pedals, minimizing noise and interference. Each output delivers 300mA.
• 1 USB 5V Output: Dedicated 5V 1A USB output for powering compatible devices or charging.
• Independent Overcurrent Protection: Each output channel is equipped with independent overcurrent protection. If one channel experiences a short circuit, other channels remain operational.
• LED סטאַטוס ינדיקאַטאָרס: Blue LED lights indicate the operational status of each channel. An LED will turn off if its corresponding channel experiences an overcurrent condition.
• Noise Reduction Circuit Design: Engineered to minimize unwanted noise, contributing to a superior audio experience.
• דוראַבאַל קאַנסטראַקשאַן: Made from lightweight and robust aluminum alloy.

בילד 2.1: איבערview of the 11 independent power supply interfaces.

Image 2.2: Short circuit protection with LED indicators for normal operation and short circuit.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:

• M-VAVE SK2 Isolated Guitar Pedal Power Supply Unit
• Power Adapter (DC 12V 2A input)
• 10 x DC Power Cables (for connecting pedals)

Image 3.1: M-VAVE SK2 unit with its accessories.

4. סעטאַפּ

1. פאַרבינדן די מאַכט אַדאַפּטער: Plug the provided DC 12V 2A power adapter into the 'DC IN' port on the M-VAVE SK2 unit. Connect the other end of the adapter to a suitable power outlet.
2. Connect Effect Pedals: Use the included DC power cables to connect your guitar effect pedals to the 10 isolated 9V DC outputs. Ensure the polarity of the cables matches your pedals' requirements (center negative is standard for most guitar pedals).
3. פֿאַרבינדן USB דעוויסעס (אָפּציאָנאַל): If needed, connect a USB-powered device to the 5V 1A USB output port.
4. מאַכט אויף: Once all connections are secure, the blue LED indicators on the M-VAVE SK2 unit will illuminate, indicating that power is being supplied to the connected channels.

5. אָפּעראַציע

The M-VAVE SK2 operates automatically once connected to power and your pedals. Each blue LED light corresponds to an output channel. When a channel is functioning correctly, its LED will be lit. In the event of an overcurrent or short circuit on a specific channel, its corresponding LED light will turn off, indicating a fault without affecting the operation of other channels.

6. זיכערקייַט אינפֿאָרמאַציע

• Use only the provided power adapter. Using an incorrect adapter may damage the unit or connected devices.
• שטעלט נישט אויס דעם אַפּאַראַט צו וואַסער, פייכטקייט, אָדער עקסטרעמע טעמפּעראַטורן.
• פֿאַרמײַדט צו לאָזן פאַלן אָדער אויסשטעלן דאָס אַפּאַראַט צו שטאַרקע קלאַפּן.
• Do not attempt to open or modify the unit. Refer servicing to qualified personnel.
• זיכער מאַכן אַז די ווענטילאַציע אַרום דעם אַפּאַראַט איז ריכטיק בעתן אָפּעראַציע.

7. טראָובלעשאָאָטינג

No power to a pedal:

Check if the LED indicator for that specific output channel is off. If it is, disconnect the pedal from that output and check the pedal for faults. The LED turning off indicates an overcurrent or short circuit on that channel. Reconnect the pedal only after resolving the issue.

No power to any pedal:

Ensure the power adapter is securely connected to both the M-VAVE SK2 unit and a working power outlet. Verify that the power adapter itself is functional.

Unwanted noise in the audio signal:

While the SK2 features noise reduction, external factors can still introduce noise. Ensure all cables are properly shielded and connected. Test pedals individually to identify if a specific pedal is generating noise. Check for ground loops in your setup.

8. ספּעסאַפאַקיישאַנז

Image 8.1: Dimensions of the M-VAVE SK2 unit.

Image 8.2: Top and side view of the M-VAVE SK2 unit.

9. וישאַלט

• רייניקונג: ניצט אַ ווייכע, טרוקענע שטאָף צו רייניקן די אויסערלעכע זייט פון דעם אַפּאַראַט. ניצט נישט קיין פליסיקע רייניגער אָדער סאָלווענטן.
• סטאָרידזש: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• קאַבלע פאַרוואַלטונג: Ensure power cables are not kinked or strained to prevent damage.

10. וואָראַנטי און שטיצן

The M-VAVE SK2 Isolated Guitar Pedal Power Supply comes with a one-year warranty from the date of purchase. For any product-related issues or support inquiries, please contact M-VAVE customer service. When contacting support, provide your purchase details and a clear description of the issue.