הקדמה
This manual provides essential information for the safe and effective installation, operation, and maintenance of your HELLA 2JA 959 037-801 Warning Light. Please read this manual thoroughly before use and retain it for future reference.
זיכערקייַט אינפֿאָרמאַציע
שטענדיק אָבסערווירן די פאלגענדע זיכערהייט מיטלען צו פאַרמייַדן שאָדן אָדער שעדיקן צו דעם פּראָדוקט:
- Ensure the vehicle's power supply is disconnected before installation.
- די אינסטאַלאַציע זאָל דורכגעפירט ווערן דורך קוואַליפֿיצירטע פּערסאָנעל צו ענשור ריכטיקע וויירינג און מאַונטינג.
- Do not modify the product in any way, as this may void the warranty and compromise safety.
- באַשטעטיקן אַז די אַפּערייטינג voltage of the vehicle matches the product's specifications (9-33V).
- Securely mount the warning light to prevent detachment during vehicle operation.
פּראָדוקט איבערview
The HELLA 2JA 959 037-801 is an LED warning light designed for various automotive applications. It features a robust construction and a green lens, providing a clear flashing warning signal.
Figure 1: HELLA 2JA 959 037-801 Warning Light. This image displays the rectangular warning light with a prominent green LED lens in the center, flanked by yellow end caps.
שליסל פֿעיִקייטן:
- LED טעכנאָלאָגיע: Energy-efficient and long-lasting illumination.
- Flashing Warning Signal: Designed for clear visibility and safety.
- ברייט וולtagE קייט: Operates on 9-33V DC systems.
- שטאַרק שוץ: IP 6K6 and IP 6K7 rated for dust and water ingress.
- פאַרקערט פּאָלאַריטי פּראַטעקשאַן: Safeguards against incorrect wiring.
- רעפּראָגראַממאַבלע: Functionality can be adjusted as needed.
ספּעסאַפאַקיישאַנז
| אַטריביוט | ווערט |
|---|---|
| מאָדעל נומער | 2JA 959 037-801 |
| OEM Reference Number | 2JA 959 037-801 |
| VoltagE ראַנגע | 9-33 V |
| מאַכט קאַנסאַמשאַן | 9 וו |
| ליכט פּלאַן | געפירט |
| ליכט פֿונקציע | Flashing warning signal |
| אָביעקטיוו קאָליר | גרין |
| מאַונטינג טיפּ | באָלטאַד |
| קאַבלע לענג | 2500 מם |
| דימענשאַנז (L X W X D) | 20.8 cm x 177 mm x 31 mm (Length x Width x Depth) |
| הייך | 100 מם |
| וואָג | 0.5 קג |
| Protection Type (IP Code) | IP 6K6, IP 6K7 |
| Test Mark | EMC, Fulfils ECE norm: R10 |
| פאַרקערט פּאָולעראַטי שוץ | יא |
| רעפּראָגראַממאַבלע | יא |
סעטאַפּ און ינסטאַלירונג
- צוגרייטן פֿאַר ינסטאַלירונג:
- Ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical shock or short circuits.
- Choose a suitable mounting location that provides clear visibility for the warning light and allows for secure bolted mounting.
- מאָונטינג די ליכט:
- The warning light is designed for bolted mounting. Use appropriate fasteners (not included) to secure the unit firmly to the chosen surface.
- Ensure the mounting surface is flat and strong enough to support the light and withstand vehicle vibrations.
- וויירינג קאַנעקשאַנז:
- The light comes with a 2500 mm cable. Connect the positive (+) wire to a switched power source within the 9-33V range.
- Connect the negative (-) wire to a suitable vehicle ground.
- The unit features reverse polarity protection, but correct wiring is always recommended.
- Ensure all connections are secure and insulated to prevent corrosion and short circuits.
- לעצט טשעק:
- Once mounted and wired, reconnect the vehicle battery.
- Test the warning light to ensure it functions correctly, emitting a clear flashing signal.
אַפּערייטינג ינסטראַקשאַנז
The HELLA 2JA 959 037-801 Warning Light is designed for straightforward operation.
- אַקטאַוויישאַן: The warning light will activate when power is supplied to its connected circuit. This is typically controlled by a switch in the vehicle's cabin.
- Flashing Signal: Upon activation, the LED light will emit a flashing warning signal.
- רעפּראָגראַממינג: This unit can be reprogrammed. Refer to specific HELLA programming tools and software for details on how to adjust flash patterns or other functionalities. This typically requires specialized equipment and knowledge.
וישאַלט
The HELLA 2JA 959 037-801 Warning Light requires minimal maintenance due to its durable design and LED technology.
- רייניקונג: Periodically clean the lens with a soft, damp cloth and mild soap solution to ensure maximum light output. Avoid abrasive cleaners or solvents.
- דורכקוק: Regularly check the mounting bolts for tightness and inspect the wiring for any signs of wear, damage, or corrosion.
- שעדיקן: If the housing or lens is damaged, the unit's IP rating may be compromised. Replace damaged units promptly.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| ליכט באַלויכטן נישט. | No power supply, faulty wiring, blown fuse, incorrect voltage. | Check power connections, vehicle fuse box, and ensure voltage is within 9-33V. Verify wiring for continuity. |
| ליכט פליקערט אדער איז שוואַך. | לויזע פֿאַרבינדונג, נישט גענוג וואָלומעןtagע, געשעדיגטע וויירינג. | Inspect all wiring connections for tightness. Check vehicle's electrical system for stable voltage רעזולטאַט. |
| Light pattern is incorrect or inconsistent. | Internal fault, incorrect reprogramming. | If recently reprogrammed, verify the programming steps. If not, contact HELLA technical support for assistance. |
| פייכטקייט אינעווייניק פון די לינז. | Compromised seal due to damage or improper installation. | Inspect the unit for cracks or damage. Ensure mounting is secure and not causing stress on the housing. Replace if seal is compromised. |
וואָראַנטי און שטיצן
For warranty information and technical support, please refer to the official HELLA website or contact your authorized HELLA distributor. Keep your purchase receipt as proof of purchase.
