פּראָדוקט איבערview
The Dri-Eaz LGR 7000XLi Commercial Dehumidifier with Pump is a high-performance unit designed for effective moisture removal in various commercial and residential spaces. It features state-of-the-art LGR technology, a built-in pump for automatic water removal, and digital controls for precise humidity management. This robust dehumidifier is ideal for water damage restoration, construction drying, and ongoing humidity control.
Figure 1: Dri-Eaz LGR 7000XLi Commercial Dehumidifier
סעטאַפּ אינסטרוקציעס
Before operating the dehumidifier, ensure proper setup to maximize efficiency and safety.
- פּאַזישאַנינג: Place the dehumidifier in the wet area in an upright position. Ensure that the air intake and outlets are not blocked to allow for proper airflow.
- מאַכט קשר: Remove the power cord from the side pocket of the unit. Attach the power plug securely to the power socket located on the back of the dehumidifier. Then, insert the pronged plug into a grounded 15-amp outlet. The unit uses approximately 8.3 amps.
- דריינאַדזש קישקע קאַנעקשאַן: Remove the clear drainage hose from the other side pocket. Attach the quick-connect end securely to the drain outlet tube on the back of the dehumidifier. Unwind the hose and place the open end into a suitable drain location, such as a sink, toilet, tub, or outdoors. Ensure the drain location is less than 20 feet above the dehumidifier. Verify that the hose has no kinks and is unobstructed to allow for continuous automatic pump-out.
Video 1: Setup and Operation of the Dri-Eaz LGR 7000XLi Dehumidifier. This video demonstrates how to connect the power and drain hose, and how to operate the unit.
אַפּערייטינג ינסטראַקשאַנז
The LGR 7000XLi features easy-to-use digital controls for efficient operation.
פיגור 2: דיגיטאַל קאָנטראָל פּאַנעל
- מאַכט אויף / אַוועק: To turn the dehumidifier on, press the keypad's On/Off button.
- מעניו נאַוויגאַציע: Use the menu buttons to scroll through performance and setup information. You can also use these buttons to reset settings or purge the pump.
- Fast Drying (Humidistat Off): For fast drying of a damp area, use the arrow key to turn the humidistat OFF. This allows the dehumidifier to operate at full capacity, removing up to 29 gallons of water per day and drying spaces up to 13,000 cubic feet.
- Ongoing Humidity Control (Humidistat On): For ongoing humidity control in areas up to 26,000 cubic feet, turn the humidistat ON. Then, press the arrow key to set your target relative humidity percentage.
- מאָניטאָרינג פאָרשטעלונג: Regularly check the inlet and outlet readings displayed on the control panel. The outlet readings should show higher temperatures and lower humidity percentages compared to the inlet readings, indicating effective dehumidification.
- טעמפּעראַטור קאָנסידעראַטיאָנס: If the inlet temperature is at or below 60°F, consider adding heat to the environment to promote proper drying.
- שאַטדאַון פּראָצעדור: Once drying is complete, turn the dehumidifier OFF but do not unplug it immediately. The unit will undergo a shutdown process to dry the internal coils and then purge the pump. Once this process is complete, you can disconnect the power and drain hose.
For faster and more efficient drying, it is recommended to use the Dri-Eaz dehumidifier in conjunction with a Dri-Eaz air mover. The air mover promotes evaporation from wet materials, while the dehumidifier removes the moisture from the air, allowing materials to truly dry.
Figure 3: Efficient Moisture Management Features
וישאַלט
רעגולערע אויפהאלטונג גאראנטירט די לאנגעוויטי און אפטימאלע פאָרשטעלונג פון אייער לופט-טרוקענער.
- פילטער וישאַלט: The unit features a filter on top. While specific cleaning instructions are not detailed in the provided data, it is generally recommended to regularly inspect and clean or replace air filters to maintain airflow and efficiency. The specifications mention 'Hand Wash' for care instructions, which may apply to the filter or exterior cleaning.
- שפּול רייניקונג: The control panel displays 'COIL CLEANED' hours, indicating the operational time since the last coil cleaning. Refer to the user manual for recommended coil cleaning intervals and procedures.
- אַלגעמיינע רייניקונג: Keep the exterior of the unit clean.
טראָובלעשאָאָטינג
While the Dri-Eaz LGR 7000XLi is a robust unit, issues may occasionally arise. If the unit consistently errors out or experiences performance degradation, it is recommended to consult the full user manual (PDF) available via the manufacturer's website or contact customer support for detailed troubleshooting steps and professional assistance.
ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| סאָרט | Dri-Eaz |
| מאָדעל נאָמען | dehum (Model Number: F412) |
| פּראָדוקט דימענשאַנז | 20"ד רענטגענ 20"וו רענטגענ 35"ה |
| פּונקט וואָג | 107 פונט |
| מאַטעריאַל | פּאַליעטאַלין (פּע) |
| קאָליר | בלוי |
| קאַפּאַציטעט | 111 Liters (29 Gallons per Day Dehumidification) |
| טאַנק באַנד | 16 Gallons (Note: Unit features automatic pump-out, no tank emptying required) |
| שטאָק שטח קאַווערידזש | Up to 13,000 cubic feet (fast drying), 26,000 cubic feet (humidity control) |
| וואָסtage | 996 וואטס |
| אַרייַנגערעכנט קאַמפּאָונאַנץ | 25-ft power cord, 40-ft drain hose |
| ספּעציעלע פֿעיִקייטן | Detachable, Continuous Draining, Portable, Digital Display |
פיגור 4: פּראָדוקט דימענסיעס און וואָג
וואָראַנטי & שטיצן
The Dri-Eaz LGR 7000XLi Commercial Dehumidifier comes with a comprehensive warranty:
- לימיטעד ליפעטימע וואָראַנטי on the Body
- 6 יאר on Compressor & Coils
- 1 יאָר on Parts & Labor
For any inquiries, technical assistance, or warranty claims, please refer to the official Dri-Eaz customer support channels. You can also find additional support information on the Dri-Eaz Store.
