Thermalright AXP90-X36 Low Profile קפּו לופט קולער באַניצער מאַנואַל

סעטאַפּ און ינסטאַלירונג

This section provides detailed instructions for installing your Thermalright AXP90-X36 CPU Air Cooler on both Intel and AMD platforms. Please ensure your system is powered off and unplugged before beginning installation.

Intel Platform Installation (LGA115X/1200/1700/1851)

1. Remove the protective plastic sticker from the cooler's base.
2. Apply thermal compound evenly onto the CPU surface.
3. Carefully place the heatsink onto the CPU, ensuring correct airflow direction.
4. Align the motherboard mounting holes with the heatsink screws.
5. Install the backplate on the backside of the motherboard.
6. Secure the backplate and heatsink using the four hex nuts.
7. Tighten the nuts with the provided socket nuts.
8. Connect the fan header to the CPU_FAN socket on the motherboard.

AMD פּלאַטפאָרמע אינסטאַלאַציע (AM4/AM5)

1. Remove the protective plastic sticker from the cooler's base.
2. Remove the pre-installed brackets for Intel motherboards from the heatsink.
3. Install the brackets for AM4 motherboards onto the heatsink, ensuring the logo on the brackets faces towards the heatsink.
4. Install four short screws (from removed Intel brackets) into the heatsink.
5. Remove the existing AM4 plastic brackets and backplate from your motherboard.
6. Apply thermal compound evenly onto the CPU surface.
7. Carefully place the heatsink onto the CPU, aligning motherboard mounting holes to the screws.
8. Install the AM4 backplate on the backside of the motherboard, with the 'AM4' text facing outwards.
9. Pass the screws through the holes of the motherboard and backplate.
10. Secure the backplate and heatsink with the four hex nuts.
11. Tighten the nuts with the provided socket nut.
12. Connect the fan header to the CPU_FAN socket on the motherboard.

אַפּערייטינג ינסטראַקשאַנז

Once installed, the Thermalright AXP90-X36 CPU Air Cooler operates automatically. The TL-9015 PWM fan adjusts its speed based on CPU temperature, ensuring optimal cooling performance while minimizing noise. No manual configuration is typically required for basic operation.

For advanced users, fan speed curves can be adjusted through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer. Refer to your motherboard manual for specific instructions on fan control settings.

וישאַלט

רעגולערע אויפהאלטונג העלפט זיכער מאכן די לאנגעוויטי און אפטימאלע פערפארמאנס פון אייער קפידו קולער.

• שטויב רייניקונג: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• טערמישע פּאַסטע: The thermal compound applied between the CPU and heatsink may degrade over time. It is recommended to reapply fresh thermal paste every 1-2 years, or if the cooler is removed and reinstalled.
• פאָכער דורכקוק: Check the fan for any signs of wear, damage, or unusual noise. If the fan is malfunctioning, it may need to be replaced.

טראָובלעשאָאָטינג

If you encounter issues with your Thermalright AXP90-X36 CPU Air Cooler, refer to the following common solutions:

• הויכע CPU טעמפּעראַטורן:
  • Ensure the heatsink is securely mounted and making full contact with the CPU.
  • Verify that thermal paste was applied correctly and is not dried out. Reapply if necessary.
  • Check for dust buildup on the heatsink fins and fan, and clean if needed.
  • Confirm that the fan is spinning correctly and connected to the CPU_FAN header.
  • זיכער מאַכן אַז לופטפלוס איז גענוג אין דיין פּיסי קעסטל.
• פען דרייט זיך נישט:
  • Check the fan cable connection to the CPU_FAN header on the motherboard.
  • Verify fan settings in your motherboard's BIOS/UEFI.
  • Inspect the fan for any physical obstructions.
• איבערגעטריבענע פען ראַש:
  • רייניקן יעדן שטויב פון די ווענטילאַטאָר בליידז.
  • Check for loose fan screws or vibrations.
  • Adjust fan speed settings in BIOS/UEFI if running at maximum RPM unnecessarily.

פּראָדוקט ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן אינפֿאָרמאַציע

Thermalright products are manufactured to high-quality standards. For warranty claims, technical support, or further assistance, please contact Thermalright customer service through their official webפּלאַץ אָדער די זיצער ווו די פּראָדוקט איז פּערטשאַסט.

ביטע באַהאַלטן אייער קויפן-באַווייַז פֿאַר וואָראַנטי וואַלידאַציע.