הקדמה
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Remco 5500 Series ProFlo Demand Pump, model 5537-1E1-65C. This professional-grade pump is designed for various agricultural and industrial spraying applications, offering reliable performance and durability.
זיכערקייַט אינפֿאָרמאַציע
Please read and understand all safety instructions before operating the pump. Failure to follow these guidelines may result in injury or damage to the equipment.
- עלעקטריקאַל זיכערקייַט: Ensure the pump is connected to a 115 VAC power source. Use appropriate wiring (14 AWG leads) and ensure all electrical connections are secure and protected.
- טעמפּעראַטור לימאַץ: The maximum liquid temperature should not exceed 140°F (60°C). The maximum motor temperature is 180°F (82°C), but for optimal performance and motor life, the motor surface temperature should not exceed 150°F (66°C). The motor is not equipped with thermal protection.
- כעמישער קאַמפּאַטאַבילאַטי: This pump is compatible with common agricultural chemicals such as herbicides, fertilizers, and insecticides. Always verify chemical compatibility before use to prevent damage to pump components.
- דרוק: The pump operates at 60 PSI (4.1 Bar) on demand. Ensure your system can handle this pressure.
- מאָונטינג: Securely mount the pump using the integrated bracket to prevent vibration and movement during operation.
פּראָדוקט איבערview
The Remco 5500 Series ProFlo Demand Pump is a robust 5-chamber diaphragm pump designed for demanding applications. It features a sealed 115 VAC electric motor and durable components for long, continuous duty cycles.
פיגורע 1: Remco 5500 Series ProFlo Demand Pump. This image displays the pump with its silver motor housing, black pump head, and black mounting bracket. A label on the motor housing indicates the model number 5537-1E1-65C, flow rate of 5.3 GPM, 115 VAC voltage, and 60 PSI pressure rating. A power cord is visible extending from the motor.
שליסל פֿעיִקייטן:
- Professional Grade Quality
- 5.3 GPM (20.06 LPM) Flow Rate
- 60 PSI (4.1 Bar) On-Demand Operation
- געמאכט אין די USA
- 6ft מאַכט שנור
- Chemically compatible with common agricultural chemicals
- 100% Factory Tested
- Completely Sealed Motor
- Low Heat and Power Consumption
- Superior Vertical Priming (up to 14 feet / 4.0 meters)
סעטאַפּ
- מאָונטינג: Securely fasten the pump to a stable surface using the integrated mounting bracket. Ensure the pump is positioned to allow for proper ventilation and access for connections.
- גערער קאַנעקשאַנז: Connect your inlet and outlet lines to the 1/2" FNPT threaded ports. Use appropriate fittings and sealants to ensure leak-free connections. The pump is self-priming up to 14 feet (4.0 meters) vertically.
- עלעקטריקאַל קשר: Connect the 14 AWG wire leads to a dedicated 115 VAC power supply. Ensure the power source is fused and protected according to local electrical codes. Verify correct polarity.
- סיסטעם פּריימינג: Before initial operation, ensure the pump and lines are filled with liquid to facilitate priming.
אָפּעראַציע
The Remco 5500 Series pump operates in demand mode, meaning it will run when there is a demand for fluid and shut off when the system pressure reaches 60 PSI. This allows for efficient operation and reduced power consumption.
- אָנהייב די פּאָמפּע: Once all connections are secure and the system is primed, apply power to the pump. The pump will start when a flow demand is detected.
- מאָניטאָרינג: Observe the pump during operation for any unusual noises, leaks, or excessive heat.
- דוטי ציקל: The pump is designed for intermittent duty cycles. While it can withstand long cycles, continuous operation at maximum load may reduce its lifespan. Monitor motor temperature to ensure it stays below 150°F (66°C).
- טרוקן לויף קייפּאַבילאַטי: The pump has dry run capability, meaning it can operate without fluid for short periods without damage. However, prolonged dry running should be avoided.
וישאַלט
Regular maintenance ensures the longevity and optimal performance of your Remco pump.
- רייניקונג: Periodically inspect the pump for dirt, debris, or chemical residue. Clean the exterior with a damp שטאָף.
- פֿאַרבינדונגען: Regularly check all plumbing and electrical connections for tightness and signs of wear or corrosion.
- ווינטעריזאַטיאָן: If operating in freezing conditions, ensure the pump and lines are completely drained or protected with appropriate antifreeze solutions to prevent damage.
- Chemical Residue: After using corrosive or sticky chemicals, flush the pump with clean water to prevent buildup and ensure proper valve function.
טראָובלעשאָאָטינג
This section provides general guidance for common issues. For complex problems, contact Remco customer support.
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| פּאָמפּע טוט נישט אָנהייבן | No power, loose electrical connection, faulty switch. | Check power supply, verify connections, test switch. |
| נידעריקע שטראָם אָדער דרוק | Clogged inlet filter, air leak in suction line, worn diaphragm, low voltage. | Clean filter, check for leaks, inspect diaphragm, verify voltage. |
| פּאָמפּע לויפט קעסיידער | ליק אין סיסטעם, דעפעקטיווער דרוק סוויטש, לופט אין סיסטעם. | Check for leaks, inspect pressure switch, bleed air from system. |
| יבעריק ראַש אָדער ווייבריישאַן | Loose mounting, cavitation (air in line), debris in pump. | Tighten mounting, ensure proper priming, inspect for debris. |
ספּעסאַפאַקיישאַנז
| סאָרט | Remco |
| מאָדעל נומער | 5537-1E1-65C |
| פּאָמפּע טיפּ | 5 Chamber Diaphragm Pump |
| מאָדע | פאָדערונג |
| Voltage | 115 וואַק |
| מאַקסימום לויפן קורס | 5.3 גפּם (20.06 לפּם) |
| דרוק באַשטעטיקן | 60 PSI (4.1 באַר) |
| Fluid Port | 1/2" FNPT threaded Ports |
| וואַלווז | וויטאָן |
| דייאַפראַם | סאַנטאָפּרענע |
| דראָט לידז | 14 AWG - 6" or 12" 2-Pin Mold / Custom Connection |
| זיך-פּריימינג | Up to 14' (4.0 m) vertically |
| פליכט ציקל | ינטערמיטאַנט |
| Dry Run Capability | יא |
| מאַקסימום פליסיק טעמפּעראַטור | 140°F (60°C) |
| Max Motor Temperature | 180°F (82°C) (Surface temp should not exceed 150°F / 66°C) |
| UPC | 816624019041 |
| אַרייַנגערעכנט קאַמפּאָונאַנץ | פּאָמפּע |
וואָראַנטי און שטיצן
For information regarding product warranty, technical support, or replacement parts, please contact Remco directly through their official website or customer service channels. Keep your purchase receipt and model number (5537-1E1-65C) handy for faster service.
You can visit the Remco store on Amazon for more information: Remco Store
