הקדמה
This manual provides instructions for the safe installation, operation, and maintenance of your Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight, Model MRL-S20803SBW. This fixture is designed for residential and commercial indoor applications, offering adjustable color temperature and dimming capabilities. Please read these instructions thoroughly before installation and retain them for future reference.
זיכערקייַט אינפֿאָרמאַציע
WARNING: RISK OF ELECTRIC SHOCK. DISCONNECT POWER AT THE CIRCUIT BREAKER BEFORE INSTALLATION OR SERVICING.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for installation in ceilings only.
- דו זאלסט נישט מאָדיפֿיצירן דעם פֿיקסטשור און נישט נוצן עס פֿאַר אַנדערע צוועקן ווי זײַן באַשטימטן נוץ.
- ענשור די צושטעלן וואָלtagE איז 120VAC.
- This product is IC Rated, suitable for direct contact with insulation.
- דעם ייַנאָרדענונג איז Damp Rated, suitable for use in bathrooms and kitchens where moisture may be present.
פּעקל אינהאַלט
באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:
- 1 x Maxxima 2-inch Square LED Downlight Fixture (White Trim, Black Baffle)
- 1 x Remote Junction Box with Integrated CCT Selectable Switch
- 1 x Foam Gasket (pre-attached or included)
This image displays the complete Maxxima 2-inch square LED downlight unit, including the main fixture with its white trim and deep-set black baffle, and the connected external junction box.
סעטאַפּ און ינסטאַלירונג
גיי די סטעפּס פֿאַר געהעריק ינסטאַלירונג:
מכשירים פארלאנגט:
- דראָט סטריפּערז
- שרויפנ - ציער (פיליפּס און פלאַטהעאַד)
- Hole Saw or Template (2.5-inch diameter)
- מעאַסורינג טייפּ
ינסטאַלירונג סטעפּס:
- קער אַוועק מאַכט: Locate the circuit breaker controlling the area where the downlight will be installed and turn off the power. Verify power is off using a voltagE tester.
- צוגרייטן דעם דאך עפענונג: Using a 2.5-inch hole saw or template, cut a circular opening in the ceiling at the desired location. Ensure there are no obstructions (e.g., joists, pipes) behind the cutting area.
- Access Junction Box: Open the cover of the remote junction box.
- דראָט קאַנעקשאַנז: Connect the household electrical wires to the junction box wires. Use appropriate wire connectors (not included) to secure the connections:
- Connect the black (Live) wire from the supply to the black wire of the junction box.
- Connect the white (Neutral) wire from the supply to the white wire of the junction box.
- Connect the green or bare copper (Ground) wire from the supply to the green wire of the junction box.
This image displays the interior of the junction box with its cover open, revealing the wiring terminals for electrical connections (black, white, green) and the prominent 5 CCT selector switch.
- אויסקלייבן קאָליר טעמפּעראַטור (CCT): Before closing the junction box, use the switch located on the side of the junction box to select your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
א פארגרעסערטע view of the 5 CCT switch on the side of the junction box, clearly showing the selectable color temperature options: 2700K, 3000K, 3500K, 4000K, and 5000K.
This image illustrates the key feature of 5 CCT (Correlated Color Temperature) selection. It shows the downlight fixture alongside a magnified view of the switch located on the junction box, indicating options for 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), and 5000K (Daylight).
- זיכערע קנופּ קעסטל: Close the junction box cover and secure it. Place the junction box into the ceiling cavity, ensuring it is not pinched or stressed.
- Connect Fixture to Junction Box: Connect the male connector from the downlight fixture to the female connector on the junction box's installation cord. Ensure a secure connection.
- Insert Downlight Fixture: Gently push the spring-loaded clips on the sides of the downlight fixture upwards and insert the fixture into the ceiling opening. Release the clips to secure the fixture flush against the ceiling. The foam gasket will help create a tight seal.
די צוריק view of the Maxxima 2-inch square LED downlight, revealing the heat sink fins for thermal management and the spring-loaded clips used for securing the fixture in the ceiling.
- ומקערן מאַכט: אַמאָל די פֿיקסטשור איז זיכער אינסטאַלירט, צוריקשטעלן די מאַכט בייַ די קרייַז ברעאַקער.
A lifestyle image demonstrating several Maxxima 2-inch square LED downlights seamlessly integrated into the ceiling of a contemporary kitchen and living space, providing ambient lighting.
אַפּערייטינג ינסטראַקשאַנז
Your Maxxima LED Downlight is designed for simple operation:
- מאַכט אויף / אַוועק: The downlight is controlled by a standard wall switch connected to the electrical circuit.
- דימינג: This fixture is compatible with most standard LED dimmers, allowing for a dimmable range of 20% to 100%. Ensure your dimmer is compatible with LED lighting for optimal performance.
- קאָליר טעמפּעראַטור סעלעקציע: The color temperature (CCT) is set using the switch on the junction box during installation. It cannot be changed without accessing the junction box.
A detailed close-up of the Maxxima 2-inch square LED downlight after installation, showing the white trim flush with the ceiling and the black baffle housing the illuminated LED.
וישאַלט
The Maxxima LED Downlight requires minimal maintenance:
- רייניקונג: To clean the fixture, ensure power is off. Wipe the surface with a soft, dry, or slightly damp שטאָף. ניצט נישט קיין שרײַבנדיקע רייניגער, סאָלווענטן, אדער שטרענגע כעמיקאַלן, ווײַל די קענען שאַטן די ענדיקונג אדער עלעקטרישע קאָמפּאָנענטן.
- קיין באַניצער-סערוויסאַבלע פּאַרץ: The LED light source is integrated and not replaceable. Do not attempt to open or repair the fixture.
טראָובלעשאָאָטינג
If you encounter issues with your downlight, refer to the following common problems and solutions:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| ליכט טוט נישט קער אויף. | קיין מאַכט צו די ייַנאָרדענונג. פרייַ וויירינג קשר. Incorrect CCT switch setting. | קאָנטראָלירט דעם קרייז ברעיקער און וואַנט סוויטש. Verify all wire connections in the junction box are secure (ensure power is off first). Confirm CCT switch on junction box is set to a valid position. |
| ליכט פליקערט אדער פארשווארצט זיך נישט קאנסיסטענט. | נישט-קאמפאטיבלע דימער סוויטש. פרייַ וויירינג קשר. | Ensure you are using an LED-compatible dimmer switch. Check all wiring connections (with power off). |
| אומרעכטע קאָליר טעמפּעראַטור. | CCT סוויטש נישט ריכטיק איינגעשטעלט. | Access the junction box (power off) and adjust the CCT selection switch to the desired setting. |
ספּעסאַפאַקיישאַנז
| שטריך | באַשרייַבונג |
|---|---|
| סאָרט | Maxxima |
| מאָדעל נומער | MRL-S20803SBW |
| מאַכט קאַנסאַמשאַן | 9 וואטס |
| ברייטנאַס | 500 לומענס |
| אַרייַנשרייַב וואָלtage | 120VAC |
| קאָליר טעמפּעראַטור (CCT) | 2700K / 3000K / 3500K / 4000K / 5000K Selectable |
| קאָליר רענדערינג אינדעקס (CRI) | 90 |
| דימינג ראַנגע | 20% - 100% (with compatible LED dimmer) |
| Fixture Dimensions (L x W x H) | 3.16" x 3.16" x 2.6" |
| Junction Box Dimensions (H x W x D) | 1.25" x 3.4" x 3.4" |
| Recommended Hole Cutout | 2.5 אינטשעס |
| מאַטעריאַל | אַלומינום |
| ענדיקן | White Trim, Black Baffle |
| סערטיפיקאַטיאָנס | ETL Listed, IC Rated |
| סוויווע רייטינג | Damp Rated (Indoor Use) |
| שטראַל ספּרעאַד | 36° |
| פּונקט וואָג | 10.72 אונסעס |
A technical diagram illustrating the physical dimensions of the Maxxima 2-inch square LED downlight, with measurements of 3.16 inches in length, 3.16 inches in width, and 2.6 inches in height.
וואָראַנטי און שטיצן
This Maxxima LED Downlight is backed by a 3 יאָר וואָראַנטי פֿון דעם קויפֿדאַטום, וואָס דעקט חסרונות אין מאַטעריאַלן און אַרבעט אונטער נאָרמאַלן באַנוץ.
For technical assistance, warranty claims, or product inquiries, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima webזייטל פֿאַר איצטיקע קאָנטאַקט אינפֿאָרמאַציע.
