פאַנטעקס XT View מיטל-טורעם גיימינג שאַסי אינסטרוקציע מאַנואַל

1. הקדמה

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

שליסל פֿעיִקייטן:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן אין דער פּאַקעט:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • זיפּ טייז (30x)
  • MB/SSD Screws (30x)
  • גראָבער פינגער (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. סעטאַפּ און ייַנמאָנטירונג

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View שאַסי.

3.1. צוגרייטן דעם שאַסי

1. אַנפּאַק: נעמט פֿאָרזיכטיק אַרויס דאָס שאַסי פֿון זײַן פּאַקעט.
2. אַראָפּנעמען פּאַנאַלז: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

בילד 3.1: אינעווייניק view of the XT View chassis, ready for component installation.

3.2. מאָטהערבאָאַרד ינסטאַללאַטיאָן

1. ינסטאַלירן סטאַנדאָפס: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Place Motherboard: Carefully align your motherboard with the standoffs and I/O shield opening.
3. זיכערע מוטערבאָרד: Use the provided MB screws to secure the motherboard to the chassis.

3.3. מאַכט צושטעלן אַפּאַראַט (PSU) ינסטאַלירונג

1. פאזיציע PSU: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. זיכערע PSU: Fasten the PSU to the chassis using the provided PSU screws.

3.4. סטאָרידזש דרייוו אינסטאַלאַציע

The chassis supports 3.5" HDDs and 2.5" SSDs.

• 3.5" האַרט דרייוו: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5" SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. עקספּאַנשאַן קאַרטל (GPU) ינסטאַלירונג

1. אַראָפּנעמען סלאָט דעקל: אַראָפּנעמען די נייטיקע יקספּאַנשאַן סלאָט דעקל פון די הינטערשטע טייל פון די שאַסי.
2. אַרייַנלייגן קאָרט: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. זיכערע קאַרטל: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

בילד 3.2: הינטערשטע אינעווייניק view highlighting expansion slots and fan mounting points.

3.6. אינסטאַלאַציע פון ​​ווענטילאַטאָר און ראַדיאַטאָר

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. קאַבלע מאַנאַגעמענט

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

בילד 3.3: דערציען view illustrating cable management space.

3.8. פראָנט איך / אָ קאַנעקשאַנז

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• וסב 3.0 כעדער
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. אַפּערייטינג ינסטרוקטיאָנס

4.1. מאַכט אויף / אויסגעלאשן

דרוק די מאַכט קנעפּל located on the top front panel to turn the system on or off.

4.2. Front Panel Connectivity

די פראָנט I/O פּאַנעל גיט באַקוועמען צוטריט צו:

• 1x USB 3.0 פּאָרט
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. וישאַלט

5.1. רייניקונג פון שטויב פילטערס

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. אַראָפּנעמען פילטערס: Gently slide out or unclip the dust filters.
2. ריין: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. ריינסטאַלירן: Place the clean, dry filters back into their positions.

5.2. אַלגעמיינע רייניקונג

For external surfaces, use a soft, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. טראָובלעשאָאָטינג

די סעקציע באהאנדלט אלגעמיינע פראבלעמען וואס איר קענט באגעגענען.

6.1. סיסטעם גייט נישט אן

• מאַכט קאַנעקשאַנז: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Motherboard Connections: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• פראָנט פּאַנעל כעדער: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• מאָטהערבאָאַרד סינק: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• קנעפּל פאַנגקשאַנאַליטי: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• פֿאַרבינדונגען: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• מניעות: Check for any cables or objects obstructing fan blades.
• שטויב: Clean any dust buildup on fan blades.

7. ספּעסאַפאַקיישאַנז

8. שטיצן און וואָראַנטי

For additional information, technical support, or warranty inquiries, please visit the official Phanteks webפּלאַץ:

www.phanteks.com

Refer to the Phanteks website for the most current warranty terms and conditions applicable to your region.