הקדמה
Welcome to the user manual for your TAB Fairy10 Robot Vacuum and Mop Combo. This advanced cleaning device is designed to provide comprehensive floor care with its powerful 6000 Pa suction, hidden LiDAR navigation for precise mapping, and intelligent features such as self-drying, auto-empty, and auto-refill capabilities. Its 15mm auto-lift dual mops and AI 3.0 obstacle avoidance ensure efficient and thorough cleaning across various floor types.
פּעקל אינהאַלט
ביטע באַשטעטיקן אַז אַלע זאכן וואָס זענען ליסטעד אונטן זענען אַרייַנגערעכנט אין דיין פּעקל:
- Robot Vacuum × 1
- Charging Base × 1
- אַדאַפּטער × 1
- HEPA Filters × 4 (2 pairs)
- רייניקונג באַרשט × 1
- Side Brushes × 4 (2 pairs)
- באַניצער מאַנואַל × 1
- מאַכט קאַבלע × 1
- Disposable Dust Bags × 2
- Mop Cloths × 2 Pairs
Figure 1: All included components in the TAB Fairy10 package.
סעטאַפּ
1. אַנפּאַקינג און פּלייסמאַנט
- Remove all packaging materials and protective films from the robot and the charging base.
- Place the charging base against a wall on a hard, level surface. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the base.
- Connect the power cable to the charging base and plug it into a power outlet.
2. טשאַרדזשינג די ראָבאָט
- Place the robot onto the charging base. Ensure the charging contacts on the robot align with those on the base.
- The robot will automatically begin charging. For first-time use, fully charge the robot before operation (approximately 6 hours).
3. אָנפֿילן וואַסער טאַנקען
- Open the top cover of the charging base to access the clean water tank and dirty water tank.
- Remove the clean water tank and fill it with clean tap water. You may add a small amount of non-foaming, robot-safe cleaning solution if desired.
- Ensure the dirty water tank is empty before starting a cleaning cycle.
- Return both tanks to their respective slots in the charging base.
Figure 2: The TAB Fairy10 Robot Vacuum and its comprehensive charging station.
פיגורע 3: איבערview of the station's automated functions: self-cleaning, self-emptying, self-drying, and self-refilling.
אַפּערייטינג ינסטראַקשאַנז
1. פּאָווערינג אויף / אויסגעלאשן
- To power on, press and hold the power button on the robot for 3 seconds until the indicator lights up.
- To power off, press and hold the power button for 3 seconds while the robot is stationary.
2. קאַנעקטינג צו מאָביל אַפּ
- Download the official TAB app from your smartphone's app store.
- Follow the in-app instructions to connect your robot to your home Wi-Fi network. This will enable remote control, scheduling, map management, and cleaning mode selection.
3. רייניקונג מאָדעס
The TAB Fairy10 supports various cleaning modes, selectable via the mobile app:
- וואַקוום מאָדע: פֿאַר זאַמלונג פֿון טרוקענע אָפּפֿאַל.
- אָפּווישן מאָדע: For wet cleaning of hard floors.
- וואַקוום און מאַפּ מאָדע: גלייכצייטיג וואַקוום רייניקונג און מאַפּינג.
- אָרט רייניקונג: Concentrated cleaning for specific dirty areas.
- זאָנע רייניקונג: רייניקט באַניצער-דעפינירטע געביטן אויף דער מאַפּע.
4. Navigation and Obstacle Avoidance
The robot utilizes hidden LiDAR navigation to create precise maps of your home, ensuring efficient cleaning paths. Its AI 3.0 obstacle avoidance technology helps it detect and navigate around common household items, reducing the chance of getting stuck.
Figure 4: The robot's hidden LiDAR navigation allows it to clean under furniture effectively.
Figure 5: The powerful 6000Pa suction ensures thorough cleaning of various debris.
Figure 6: AI 3.0 obstacle avoidance helps the robot navigate around household items.
5. Automatic Mop Lifting and Dual Dirt Solution
The robot features automatic mop lifting by 15mm when it detects carpets, preventing wetting. For mopping, it applies 10N pressure and rotates at 180 rpm, providing effective scrubbing for stubborn dirt.
Figure 7: The automatic 15mm mop lifting feature protects carpets during mopping cycles.
Figure 8: The dual dirt solution combines high-speed rotation and pressure for effective mopping.
וישאַלט
רעגולערע אויפהאלטונג גאראנטירט אפטימאלע פאָרשטעלונג און פארלענגערט די לעבנס-צייט פון אייער ראָבאָט וואַקוום.
1. Emptying the Dustbin and Replacing Dust Bag
- The robot automatically empties its internal dustbin into the disposable dust bag in the charging base.
- Replace the disposable dust bag in the charging base when the indicator light or app notification indicates it is full.
2. Cleaning Mop Pads
- The charging base automatically cleans and dries the mop pads after each mopping cycle.
- Periodically remove the mop pads and hand wash them with water and mild detergent to remove any residual dirt. Allow them to air dry completely before reattaching.
3. רייניקונג פילטערס
- Tap the HEPA filters gently to remove loose dust. Do not wash HEPA filters with water.
- Replace HEPA filters every 3-6 months, or as needed, depending on usage.
4. רייניקונג באַרשטן
- Remove the main brush and side brushes. Use the provided cleaning tool to cut and remove any tangled hair or debris.
- Wipe the brushes with a dry cloth.
5. רייניקונג סענסאָרן און טשאַרדזשינג קאָנטאַקטן
- Wipe all sensors (cliff sensors, wall sensor, LiDAR sensor window) and charging contacts on both the robot and the charging base with a clean, dry cloth.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Robot does not power on or charge. | Battery low; charging contacts dirty; power cable disconnected. | Ensure robot is on charging base; clean charging contacts; check power cable connection. |
| ראָבאָט בלייבט אָפט שטעקן. | שטערונגען אין וועג; סענסארן שמוציק. | Clear cables, small objects, and thick rugs; clean all sensors. |
| שלעכטע רייניקונג פאָרשטעלונג. | Dustbin full; brushes tangled; filters clogged; water tank empty. | Empty dustbin; clean/replace brushes; clean/replace filters; refill clean water tank. |
| אַפּ קאַנעקשאַן פּראָבלעמען. | Incorrect Wi-Fi password; robot too far from router; app outdated. | Verify Wi-Fi credentials; move robot closer to router; update app; restart robot and router. |
| Mop pads not drying properly. | Insufficient airflow; station vents blocked. | Ensure station is in a well-ventilated area; clear any obstructions around station vents. |
ספּעסאַפאַקיישאַנז
| שטריך | באַשרייַבונג |
|---|---|
| סאָרט | טאַב |
| מאָדעל נאָמען | Fairy 10 (M50-PT-US) |
| ספּעציעלע שטריך | Auto-Docking, Self-Drying, Auto Empty & Refill, 15mm Auto-Lift Dual Mops, Obstacle Avoidance |
| קאָליר | שוואַרץ |
| פּראָדוקט דימענשאַנז (L x W x H) | 18.8" x 18.8" x 19.2" |
| פילטער טיפּ | קאַרטרידזש (HEPA) |
| באַטערי לעבן | קסנומקס מינוט |
| מאַכט מקור | באַטאַרייע פּאַוערד |
| ליטהיום באַטערי וואָלtage | 3.6 וואלטס |
| פאָרם פאַקטאָר | Rectangular (Base), Round (Robot) |
| פּונקט וואָג | 41.5 פונט |
| פאַבריקאַנט | SHENZHEN FENGCHAO NEW TECHNOLOGY CO., LTD |
| ערשטער דאַטע בנימצא | 7 נאוועמבער 2024 |
Figure 9: Regulatory and manufacturing information.
וואָראַנטי און שטיצן
The TAB Fairy10 Robot Vacuum and Mop Combo comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or contact TAB customer support.
For technical assistance, troubleshooting, or spare parts inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt and product serial number handy when contacting support.
