Inkbird ITC-C216T Thermostat Instruction Manual

הקדמה

Thank you for choosing the Inkbird ITC-C216T Thermostat. This device is a versatile plug-and-play temperature controller designed for precise temperature management in a wide range of applications. It features three control modes: temperature, cycle time, and countdown, along with safety features like high/low temperature alarms and a child lock. This manual will guide you through the setup, operation, and maintenance of your thermostat to ensure optimal performance and safe use.

זיכערקייַט אינפֿאָרמאַציע

• Ensure the thermostat is connected to a grounded power outlet.
• Do not exceed the maximum load capacity of 10A, 220V AC (2200W).
• Keep the device away from water, except for the IP67 rated probe.
• פרובירט נישט צו צענעמען אדער פאררעכטן דעם איינהייט אליין. קאנטאקטירט קאסטומער סופארט אויב פראבלעמען קומען אויף.
• שטענדיק אָפּשטעקן די מיטל איידער רייניקונג אָדער דורכפירן וישאַלט.

פּראָדוקט איבערview

קאַמפּאָונאַנץ

בילד: Detailed diagram of the Inkbird ITC-C216T thermostat with labeled components.

1. LCD with White Backlight: Displays current and set temperatures/times.
2. אפעראציאנעלע קנעפּלעך: MODE, UP, SET, DOWN for navigation and setting adjustments.
3. רעזולטאַט: Max 10A (2200W at 220Vac) for connecting heating or cooling devices.
4. טעמפּעראַטור זאָנד: 2m/79in long, IP67 waterproof for accurate temperature detection.
5. אַרייַנשרייַב: 100~240Vac 50/60Hz max 10A.
6. באַהיצונג בילדל: Indicates heating operation.
7. Cooling Icon: Indicates cooling operation.
8. צייט בילדל: Indicates timing function is active.
9. קינד לאַק ייקאַן: Indicates child lock is engaged.
10. אָנהייב: Displays start temperature or time.
11. האַלטן: Displays stop temperature or time.

שליסל פֿעיִקייטן

בילד: The Inkbird ITC-C216T thermostat showcasinג זיינע הויפּט פֿעיִקייטן.

• באַקלייט לקד ווייַז: Easy to read current and set values, even in low light.
• Three Control Modes: Temperature, Cycle Time, and Countdown.
• ברייט טעמפּעראַטור קייט: Controls temperatures from -40°C to 100°C.
• הויך/נידעריק טעמפּעראַטור אַלאַרמס: Customizable alarm values with an option to mute the buzzer.
• טעמפּעראַטור קאַלאַבריישאַן: Allows for fine-tuning temperature readings.
• Cooling Delay: Protects cooling equipment from short cycling.
• קינד שלאָס: פאַרהיט אַקסאַדענטאַל ענדערונגען צו סעטטינגס.
• זכּרון פֿונקציע: Retains all settings after a power interruption.
• IP67 וואַסערפּרוף פּראָבע: Suitable for use in soil or submerged in water.

סעטאַפּ

1. אַנפּאַק: Carefully remove the thermostat and its components from the packaging.
2. צאַפּן אין: Insert the thermostat into a standard 220V AC grounded power outlet. The LCD display will light up.
3. קאָננעקט דיווייס: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the output socket of the thermostat.
4. פּאָזיציע פּראָבע: Place the waterproof temperature probe in the environment where temperature control is needed (e.g., terrarium, water, soil). Ensure the probe is securely positioned and not directly exposed to heating elements or strong air currents that could affect readings.

אַפּערייטינג מאָדעס

The ITC-C216T thermostat supports three main control modes: Temperature Mode, Cycle Time Mode, and Countdown Mode. Please note that Temperature Mode and Timing functions cannot be used simultaneously.

1. טעמפּעראַטור מאָדע

בילד: Visual representation of the thermostat's cooling and heating functions.

In Temperature Mode, the thermostat automatically controls your connected device (heater or cooler) to maintain a desired temperature range. The device will operate in heating or cooling mode based on your set START and STOP temperatures.

• דרוק די מאָדע button repeatedly until the display shows the temperature mode (usually indicated by a thermometer icon).
• דרוק שטעלן to enter setting mode. The START temperature will flash. Use the UP און אַראָפּ buttons to adjust the desired START temperature.
• דרוק שטעלן again to confirm and move to the STOP temperature. Adjust the STOP temperature using UP און אַראָפּ.
• דרוק שטעלן one more time to save the settings and exit.
• If START temperature is lower than STOP temperature, the thermostat operates in באַהיצונג מאָדע.
• If START temperature is higher than STOP temperature, the thermostat operates in קאָאָלינג מאָדע.

2. ציקל צייט מאָדע (P01)

בילד: Diagram explaining the Cycle Time Mode (P01) operation.

This mode allows you to set a repeating ON/OFF cycle for your connected device. The time range is 0 to 99 hours and 59 minutes.

• דרוק מאָדע until P01 is displayed.
• דרוק שטעלן. The ON time will flash. Adjust using UP/אַראָפּ.
• דרוק שטעלן. The OFF time will flash. Adjust using UP/אַראָפּ.
• דרוק שטעלן to save and exit. The device will now cycle ON and OFF according to your settings.

3. צייל-דאון מאָדע (P02, P03, P04)

The Countdown Mode offers three sub-modes for specific timed operations:

• P02: Countdown ON
  

  בילד: Diagram explaining the Countdown ON Mode (P02).

  דער אַפּאַראַט וועט זיך אנצינדן נאָך דער באַשטימטער צייל־צייט פּעריאָדע.
• P03: Countdown OFF
  

  בילד: Diagram explaining the Countdown OFF Mode (P03).

  דער אַפּאַראַט וועט זיך אויסלעשן נאָך דער באַשטימטער צייל־אויס צייט.
• P04: Countdown ON & OFF
  

  בילד: Diagram explaining the Countdown ON&OFF Mode (P04).

  The device will turn ON after the first countdown, then turn OFF after a second countdown.

To set any Countdown Mode:

• דרוק מאָדע until P02, P03, or P04 is displayed.
• דרוק שטעלן. The countdown time(s) will flash. Adjust using UP/אַראָפּ.
• דרוק שטעלן צו ראַטעווען און אַרויסגאַנג.

אַוואַנסירטע סעטטינגס

טעמפּעראַטור קאַלאַבריישאַן (CA)

בילד: Thermostat screen showing temperature calibration setting.

If you find that the temperature reading is inaccurate compared to a known reference thermometer, you can calibrate the device:

• With the device powered on, press and hold the שטעלן button for approximately 3 seconds to enter the parameter settings.
• ניצן די UP/אַראָפּ buttons to navigate to the 'CA' (Calibration) setting.
• דרוק שטעלן, דעמאָלט נוצן UP/אַראָפּ to adjust the calibration value (e.g., +0.5°C or -0.5°C).
• דרוק שטעלן צו באַשטעטיקן און אַרויסגאַנג.

Cooling Delay (Pt)

בילד: Thermostat screen showing refrigeration delay setting.

The cooling delay function prevents rapid cycling of cooling equipment, which can extend its lifespan.

• Enter parameter settings (press and hold שטעלן פֿאַר 3 סעקונדעס).
• Navigate to 'Pt' (Cooling Delay).
• Adjust the delay time in minutes using UP/אַראָפּ.
• דרוק שטעלן צו באַשטעטיקן און אַרויסגאַנג.

High/Low Temperature Alarms (AH/AL)

בילד: Thermostat screen showing high temperature alarm with mute option.

Set custom high (AH) and low (AL) temperature alarm values. If the detected temperature exceeds these limits, an audible alarm will sound.

• Enter parameter settings.
• Navigate to 'AH' (High Alarm) or 'AL' (Low Alarm).
• Adjust the alarm temperature using UP/אַראָפּ.
• דרוק שטעלן צו באַשטעטיקן.
• To mute the buzzer, press any button when the alarm sounds.

קינד לאַק

בילד: Thermostat displaying the child lock icon.

To prevent accidental changes to settings, activate the child lock:

• דריקן און האַלטן די UP און אַראָפּ buttons simultaneously for approximately 3 seconds. The child lock icon will appear on the display.
• Repeat the action to unlock the device.

זכּרון פֿונקציע & פאַבריק באַשטעטיק

• זכּרון פֿונקציע: The thermostat automatically saves all your settings. In case of a power outage, the device will resume operation with the last saved settings once power is restored.
• פאַבריק באַשטעטיק: To restore the device to its default factory settings, consult the full user manual or contact Inkbird support for specific instructions.

אַפּפּליקאַטיאָנס

בילד: Diverse applications of the Inkbird ITC-C216T thermostat.

The Inkbird ITC-C216T thermostat is suitable for a wide range of temperature control needs, including but not limited to:

• Reptile Terrariums and Aquariums
• Greenhouses and Plant Propagation
• Incubators for Eggs
• Home Brewing and Fermentation
• Controlling Freezers and Refrigerators
• Managing Heating Mats and other Home Appliances

ספּעסאַפאַקיישאַנז

טראָובלעשאָאָטינג

If you encounter issues with your Inkbird ITC-C216T thermostat, please refer to the following common solutions:

• ווייַז ניט לייטינג: Ensure the thermostat is securely plugged into a live power outlet. Check the power supply.
• אומגענויע טעמפּעראַטור מעסטונג: Verify the probe is correctly placed and not damaged. Perform a temperature calibration (refer to Advanced Settings).
• Device Not Turning On/Off: Check if the connected heating/cooling device is functioning correctly. Ensure the thermostat is in the correct operating mode (Temperature, Cycle Time, or Countdown) and that settings are properly configured. Verify the child lock is not active.
• Alarm Sounds Continuously: Check the high/low alarm settings (AH/AL) and the current temperature. Adjust alarm values if necessary or mute the buzzer by pressing any button.
• סעטטינגס נישט שפּאָרן: The device has a memory function. If settings are not retained, try a factory reset (consult full manual) or contact support.

For more detailed troubleshooting or persistent issues, please contact Inkbird customer support.

וישאַלט

• רייניקונג: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
• פּראָבע באַהאַנדלונג: Regularly inspect the temperature probe for any signs of damage. Clean the probe gently if it accumulates debris, especially if used in water or soil.
• סטאָרידזש: If storing the device for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

וואָראַנטי און שטיצן

Inkbird products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please visit the official Inkbird webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך.

איר קענט געפֿינען מער אינפֿאָרמאַציע און שטיצע רעסורסן דורך באַזוכן די אינקבירד קראָם אויף עמעזאן.