Cable Matters 20Gbps USB C Switch (Model 201352) Instruction Manual

1. איבערview

The Cable Matters 20Gbps USB C Switch allows two computers to share a single USB-C or Thunderbolt 4 monitor or docking station. This device is designed to streamline your workspace by eliminating the need to constantly swap cables between devices. It supports high-resolution video output, fast data transfer, and power delivery to the active computer.

קאָמפּאַטיביליטי ווארענונג:

• Use only the included USB4 20Gbps cables. Do not substitute with Thunderbolt 3/4/5 cables.
• Avoid USB-C docks with built-in (non-detachable) host cables.
• This switch works with USB4 and Thunderbolt 4 docks, but its 20Gbps bandwidth (vs. 40Gbps docks) may limit display resolution, refresh rate, or number of monitors compared to a direct connection.

Image: The Cable Matters 20Gbps USB C Switch facilitates instant switching between two USB-C devices connected to a single monitor.

2. פּראָדוקט אינהאַלט

דער פּעקל כולל די פאלגענדע זאכן:

• 1x USB-C Switch (Model 201352) with 1.6ft Pigtail Cable
• 2x 20Gbps USB4 Cables (3.3ft)
• 1x RF רימאָוט קאָנטראָל
• 2x Hook-and-Loop Pads
• 1x באַניצער מאַנואַל (דאָס דאָקומענט)
• 1x קאָנטאַקט קאַרד

Image: All items included in the Cable Matters 20Gbps USB C Switch package.

3. פֿעיִקייטן

• Ultra-Fast 20 Gbps USB4 / USB-C Switching: Instantly share a USB-C monitor or Thunderbolt 4 monitor or a Thunderbolt docking station between two laptops. Achieves data transfer speeds up to 20 Gbps, suitable for large file transfers and high-resolution video streaming.
• 8K Video Resolution Support: Experience stunning 8K video output at 30Hz or 4K at 144Hz on Windows, and 4K at 60Hz on macOS when connected to a single USB-C or Thunderbolt 4 monitor.
• Docking Station Conversion: Share one USB-C or Thunderbolt 4 docking station between two computers, effectively turning it into a KVM switch. For dual or multi-monitor setups on Windows, a USB-C/TB4 dock with MST is required (macOS supports one external display).
• 140W Power Delivery Pass-through Charging: Provides robust power delivery pass-through up to 140W to the active computer, ensuring fast and efficient charging for compatible laptops and USB-C devices. Note: This switch charges only the selected (active) computer.
• Convenient RF Remote Control: Seamlessly switch between two connected hosts using the included RF remote control, eliminating the need for additional software or drivers and allowing for flexible placement of the switch.

4. סעטאַפּ אינסטרוקציעס

Follow these steps to set up your Cable Matters 20Gbps USB C Switch:

1. Connect the Switch to your Display/Dock: Connect the pigtail cable (the short, attached USB-C cable) from the switch to your USB-C or Thunderbolt 4 monitor or docking station.
2. Connect Computers: Use the two included 3.3ft USB4 20Gbps cables to connect your two computers to the two USB-C input ports on the switch. These ports are labeled '1' and '2'.
3. מאַכט (אָפּטיאָנאַל): The USB-C port near the pigtail cable does not charge the host. If the host cannot power the switch, use a 5V charger (not included) with the dedicated power input port on the switch.
4. ערשט סעטאַפּ: It is recommended to power off all connected devices (monitor and computers) before making connections. Once all connections are secure, power on your devices. If you encounter display issues, a fresh restart of all devices after connection may resolve them.

Image: Connection diagram for sharing a USB-C monitor between two computers.

Image: Setup for Windows computers with a Thunderbolt 4 docking station for multi-monitor expansion.

Image: Setup for macOS computers with a Thunderbolt 4 docking station, supporting only one extended monitor.

5. אַפּערייטינג ינסטרוקטיאָנס

The Cable Matters 20Gbps USB C Switch offers two methods for switching between connected computers:

1. מאַנואַל קנעפּל: Press the physical button on the top of the switch to toggle between Computer 1 and Computer 2. The LED indicators next to the input ports will show which computer is currently active.
2. RF רימאָוט קאָנטראָל: Use the included RF remote control for convenient switching. Press button '1' to select Computer 1 or button '2' to select Computer 2.

רימאָוט קאָנטראָל פּערינג

The remote control is pre-paired with the switch. To pair a new remote or re-pair an existing one:

1. Connect the switch to a computer.
2. Press and hold the 'Pair' button on the remote for 5 seconds until the LED on the switch stops flashing.

Image: Two methods for switching between computers: the physical button on the switch and the RF remote control.

6. וישאַלט

To ensure optimal performance and longevity of your Cable Matters 20Gbps USB C Switch, follow these general maintenance guidelines:

• האַלט דעם אַפּאַראַט אין אַ קיל, טרוקן אָרט, אַוועק פון דירעקט זונשייַן און עקסטרעמע טעמפּעראַטורן.
• Avoid exposing the switch to moisture or liquids.
• רייניקט דעם אַפּאַראַט מיט אַ ווייכן, טרוקענעם שטאָף. ניצט נישט קיין שאַרפע כעמיקאַלן אָדער אַברייסיוו רייניגער.
• Ensure cables are not bent sharply or under excessive strain to prevent damage.

7. טראָובלעשאָאָטינג

If you encounter issues with your Cable Matters 20Gbps USB C Switch, please refer to the following common solutions:

• No Display/Intermittent Display:
  • פאַרזיכערן אַז איר נוצן די included USB4 20Gbps cables. Other USB-C or Thunderbolt cables may not be fully compatible or may have directional requirements.
  • Verify all connections are secure between the computers, switch, and display/dock.
  • Restart all connected devices (computers and monitor) after ensuring all cables are properly connected.
  • If using a docking station, ensure it is a Thunderbolt 4 dock with a detachable host cable, and check its compatibility with MST for multi-monitor setups on Windows.
  • For Thunderbolt 3 devices, output is limited to 4K@60Hz and only one external display is supported.
• רימאָוט קאָנטראָל נישט ארבעטן:
  • קאָנטראָלירט די באַטאַרייע אין דער ווײַטקאָנטראָל. פֿאַרבײַטן אויב נייטיק.
  • Attempt to re-pair the remote control with the switch as described in the Operating Instructions section.
• No Power Delivery/Slow Charging:
  • Ensure the connected monitor or docking station supports power delivery to the host.
  • Remember that the switch only provides power delivery to the active computer.
  • If the host cannot power the switch, connect an external 5V charger (not included) to the dedicated power input port on the switch.
• Data Transfer Speed Issues:
  • Ensure all connected cables are rated for 20Gbps or higher.
  • The overall speed is limited by the lowest-rated component in the chain.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי & שטיצן

Cable Matters products are backed by a limited warranty. For detailed warranty information, technical support, or to contact customer service, please visit the official Cable Matters webפּלאַץ:

www.cablematters.com

You can also reach out to support via email at support@cablematters.com.