מאַניואַלז+

KERUI KERUI-D121

KERUI Wireless Door and Window Alarm System (Model KERUI-D121)

באַניצער מאַנואַל

1. הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your KERUI Wireless Door and Window Alarm System. This system is designed to enhance the security of your home, office, or garage by detecting unauthorized entry through doors or windows. It features a loud 120dB alarm and multiple operating modes for versatile use.

2. פּעקל אינהאַלט

ביטע טשעקן דעם פּעקל צו זיכער מאַכן אַז אַלע זאכן זענען דאָרט:

  • 5 x Wireless Door/Window Contact Sensors (batteries included)
  • 5 x Wireless Remote Controls (batteries included)
  • 1 x באַניצער מאַנואַל
  • 5 x Adhesive Patches
  • Mounting Screws (optional for installation)

3. פּראָדוקט איבערview

The KERUI Wireless Door and Window Alarm System consists of main alarm units (sensors) and remote controls. Each sensor unit is composed of a main alarm body and a magnetic strip. When the magnetic strip separates from the main body, the alarm is triggered.

Diagram showing the KERUI door/window alarm sensor and remote control with dimensions and button labels.

בילד 3.1: Components and Dimensions of the KERUI Sensor and Remote Control. The sensor measures approximately 10cm in length, 3cm in width, and 1.5cm in depth. The magnetic strip is 4.5cm long and 1.1cm wide. The remote control is 6.5cm long and 3.2cm wide. Key features on the sensor include an On/Off switch, a 120dB siren, and a setting button. The remote control features an LED indicator, Arm, Disarm, Chime/Alarm Mode Switch, and SOS buttons.

4. סעטאַפּ און ייַנמאָנטירונג

The KERUI alarm system is designed for easy, wire-free installation using adhesive patches or screws.

4.1. באַטאַרייע ייַנמאָנטירונג

The main alarm unit requires 2 AAA batteries. The remote control comes with a pre-installed battery.

  1. For the Sensor Unit: Open the battery compartment cover on the back of the main alarm unit. Insert 2 AAA batteries, ensuring correct polarity (+/-). Close the cover securely.
  2. פֿאַר דער ווײַטקאָנטראָל: The remote control typically comes with a battery already installed. If replacement is needed, refer to the remote's specific instructions.

4.2. מאָנטירן דעם סענסאָר

Choose a clean, dry surface on your door or window frame for installation. The main alarm unit and the magnetic strip must be aligned correctly and placed within 1 cm (0.4 inches) of each other when the door/window is closed.

Three simple steps for installing the KERUI door/window alarm sensor.

בילד 4.1: Simple Installation Steps for the KERUI Alarm. שריט 1: Insert 2 AAA batteries into the main alarm unit. שריט 2: Peel off the protective film from the adhesive patch and attach it to the back of the main alarm unit and the magnetic strip. שריט 3: Mount the main unit and magnetic strip on the door/window frame, ensuring they are aligned and separated by no more than 1 cm (0.4 inches) when the door/window is closed.

  1. ריין די ייבערפלאַך: Ensure the mounting surface is clean and dry for optimal adhesive performance.
  2. צוטשעפּען קלעפּשטאָף: Peel off the protective film from the adhesive patch and firmly attach it to the back of the main alarm unit and the magnetic strip.
  3. פּאָזיציע איינהייטן: Mount the main alarm unit on the door or window frame and the magnetic strip on the moving part (door or window). Ensure the alignment marks (arrows or lines) on both parts face each other.
  4. Maintain Gap: The gap between the main unit and the magnetic strip must be less than 1 cm (0.4 inches) when the door or window is closed.
  5. זיכער ינסטאַלירונג: Press firmly for a few seconds to ensure a strong bond. For added security, screws can be used (not always necessary with strong adhesive).

5. אַפּערייטינג ינסטרוקטיאָנס

The KERUI alarm system offers three distinct operating modes, controlled via the remote control.

5.1. רימאָוט קאָנטראָל פאַנגקשאַנז

  • Arm Button (שלאָס יקאָן): Activates the alarm system. The sensor will enter the selected alarm mode.
  • Disarm Button (ופשליסן ייקאַן): Deactivates the alarm system. The sensor will stop alarming and enter standby mode.
  • Mode Change Button (Bell/Speaker Icon): Cycles through the three alarm modes: Normal Alarm, Alarm and Stop, and Chime Mode.
  • SOS Button (SOS יקאָן): Triggers an immediate alarm regardless of the system's armed status. Useful for emergencies.
Illustration of the KERUI remote control's long-range capability, showing a hand holding the remote in a house with a 300-foot control range.

בילד 5.1: Remote Control Long Range. The wireless remote control allows for arming, disarming, and mode changes from up to 300 feet (approximately 100 meters) away in open areas.

5.2. Alarm Modes

The system offers three distinct modes to suit various security needs:

  1. Normal Alarm Mode: When a door or window is opened, the alarm will sound continuously for one minute. You can stop the alarm at any time using the remote control's Disarm button.
  2. Alarm and Stop Mode: In this mode, the alarm sounds immediately when the door or window is opened and stops as soon as the door or window is closed again. This is useful for immediate alerts that reset automatically.
  3. גאַנג מאָדע: When a door or window is opened, the unit will emit a