1. פּראָדוקט איבערview
The Orange Pi 5 Plus WiFi 6 Module Wireless Card R6 is a highly integrated wireless communication module designed for the Orange Pi 5 Plus Single Board Computer. It provides advanced Wi-Fi 6 (802.11ax) and Bluetooth 5.2 connectivity, offering high-speed data transfer rates up to 1201Mbps. This module utilizes a PCIe M.2 E-Key interface for Wi-Fi and a USB2.0 interface for Bluetooth, ensuring seamless integration and robust performance.
פיגורע 1: פראָנט view of the Orange Pi 5 Plus WiFi 6 Module R6, displaying its model, MAC addresses (e.g., WiFi MAC: A843A428DE3E), and Realtek RTL8852BE chip details.
2. זיכערקייַט אינפֿאָרמאַציע
- Always power off and disconnect the Orange Pi 5 Plus from its power source before installing or removing the module.
- Handle the module by its edges to avoid touching sensitive components and to prevent electrostatic discharge (ESD) damage.
- Ensure proper ventilation around the Orange Pi 5 Plus to prevent overheating.
- Keep the module away from liquids and extreme temperatures.
- Do not attempt to modify or repair the module yourself. Refer to qualified personnel for service.
3. פּעקל אינהאַלט
באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין דיין פּעקל:
- 1 x Orange Pi 5 Plus Wireless Module R6
- 2 x Antenna Cables (typically included for external antenna connection)
4. ינסטאַללאַטיאָן גייד
Follow these steps to install the Orange Pi 5 Plus WiFi 6 Module R6 into your Orange Pi 5 Plus Single Board Computer:
- צוגרייטונג: Ensure your Orange Pi 5 Plus is powered off and disconnected from all power sources. Place it on a clean, static-free surface.
- Locate the M.2 E-Key Slot: Identify the M.2 E-Key slot on your Orange Pi 5 Plus board. This slot is specifically designed for Wi-Fi and Bluetooth modules.
- אַרייַנלייגן די מאָדולע: Gently align the notch on the Orange Pi R6 module with the key in the M.2 E-Key slot. Insert the module at a slight angle (approximately 30 degrees) into the slot until the gold contacts are fully seated.
- זיכערן דעם מאָדול: Once seated, gently push the module down towards the board. Secure it with a small screw (not typically included with the module, but usually provided with the Orange Pi 5 Plus board or M.2 accessories) into the standoff at the end of the module.
- קאָננעקט אַנטענאַז: Carefully attach the provided antenna cables to the small connectors on the module. These are typically U.FL or IPEX connectors. Ensure they snap securely into place. Route the antenna cables away from other components and connect them to external antennas if applicable.
- Power On and Driver Installation: Reconnect power to your Orange Pi 5 Plus and boot the operating system. Most modern Linux distributions (like Ubuntu or Armbian for Orange Pi) should automatically detect the Realtek RTL8852BE-CG chip and install the necessary drivers. If not, you may need to manually install drivers or update your system's kernel. Refer to the Orange Pi official documentation or community forums for specific driver installation instructions for your chosen OS.
פיגור 2: ווינקלדיק view of the Orange Pi R6 module, illustrating its M.2 E-Key connector for proper insertion.
פיגורע 3: דערציען view of the Orange Pi R6 module, highlighting the antenna connection points.
5. אַפּערייטינג ינסטרוקטיאָנס
5.1. ווי-פי קאַנעקשאַן
- Once your Orange Pi 5 Plus is booted, navigate to your operating system's network settings.
- Enable Wi-Fi if it is not already active.
- אויסקלייבן אייער געוואונטשענע ווייערלעס נעץ (SSID) פון דער ליסטע פון פאַראַנען נעטוואָרקס.
- אַרייַן די נעץ פּאַראָל (אויב נייטיק) און גיט 'פאַרבינדן'.
- Your Orange Pi 5 Plus should now be connected to the internet via Wi-Fi 6.
5.2. בלועטאָאָטה פּערינג
- Go to your operating system's Bluetooth settings.
- Ensure Bluetooth is enabled and set to 'discoverable' or 'pairing mode'.
- שטעלט אייער בלוטוט דעווייס (למשל, כעדפאָונז, קלאַוויאַטור, מויז) אין פּערינג מאָדע.
- On your Orange Pi 5 Plus, scan for new Bluetooth devices.
- אויסקלייבן אייער דעווייס פון דער ליסטע און נאכפאלגן אלע אינסטרוקציעס אויפן עקראן צו פארענדיגן דעם פארבינדונג פראצעס.
6. וישאַלט
- Keep the module and the Orange Pi 5 Plus in a clean, dust-free environment.
- Avoid exposing the module to excessive physical shock or vibration.
- Regularly check for and install operating system updates, which may include updated drivers for improved performance and stability.
7. טראָובלעשאָאָטינג
7.1. מאָדול נישט דעטעקטירט
- טשעק די פיזישע אינסטאַלאַציע: Ensure the module is correctly seated in the M.2 E-Key slot and secured with a screw.
- Verify M.2 Slot Functionality: Confirm that the M.2 E-Key slot on your Orange Pi 5 Plus is enabled and functioning correctly (refer to Orange Pi documentation).
- שאָפער ישוז: Ensure the correct drivers for the Realtek RTL8852BE-CG chip are installed for your operating system.
7.2. No Wi-Fi or Bluetooth Connectivity
- אַנטענע קשר: Double-check that the antenna cables are securely connected to the module and any external antennas. Loose connections can severely impact performance.
- Software Enablement: Ensure Wi-Fi and Bluetooth are enabled in your operating system's settings.
- ינטערפיראַנס: Move the Orange Pi 5 Plus away from potential sources of interference (e.g., microwaves, cordless phones).
7.3. Slow Wi-Fi Speeds
- ראַוטער נאָענטקייט: Ensure the Orange Pi 5 Plus is within a reasonable range of your Wi-Fi router.
- ראָוטער סעטטינגס: Verify your router supports Wi-Fi 6 (802.11ax) and is configured for optimal performance.
- קאַנאַל ינטערפיראַנס: Use a Wi-Fi analyzer tool to check for crowded Wi-Fi channels in your area and adjust your router's channel if necessary.
8. טעכניש ספּעסאַפאַקיישאַנז
Figure 4: Orange Pi R6 module highlighting its core specifications and features.
| פּאַראַמעטער | ווערט |
|---|---|
| Major Chip | Realtek RTL8852BE-CG |
| ווירעלעסס סטאַנדאַרד | IEEE802.11a/b/g/n/ac/ax (Wi-Fi 6) |
| בלועטאָאָטה סטאַנדאַרד | BT V2.1+EDR/4.2/5.2 |
| דאַטאַ אַריבערפירן קורס (מאַקסימום) | 1201 מבפּס |
| אָפטקייַט באַנד | 2.4~2.4835 גיגאהערץ, 5.0~5.8 גיגאהערץ |
| Interface (Wi-Fi) | PCI-E (M.2 E-Key) |
| Interface (Bluetooth) | USB2.0 |
| אַפּערייטינג טעמפּעראַטור | 10~+70°C ambient temperature |
| סטאָרידזש טעמפּעראַטור | 40~+85°C ambient temperature |
| דימענשאַנז (LxWxH) | 22 מם X 30 מם X 2.33 מם (0.87 X 1.18 X 0.09 אינטשעס) |
| פּונקט וואָג | 0.634 אונסעס |
| קאַמפּאַטאַבאַל דעוויסעס | Orange Pi 5 Plus |
9. וואָראַנטי אינפֿאָרמאַציע
This Orange Pi product is covered by a limited manufacturer's warranty. Please refer to the official Orange Pi website or your purchase documentation for specific warranty terms and conditions. Typically, the warranty covers defects in materials and workmanship under normal use.
10. שטיצע און קאָנטאַקט
For technical support, driver downloads, or further assistance with your Orange Pi 5 Plus WiFi 6 Module R6, please visit the official Orange Pi webפּלאַץ:
- באַאַמטער Webפּלאַץ: www.orange-pi.com
- קאמיוניטי פארומס: Engage with other users and find solutions on the Orange Pi community forums.
- E- בריוו שטיצן: Contact Orange Pi customer service directly for specific inquiries.
Always ensure you have your product model (R6) and any relevant purchase information ready when contacting support.
