1. הקדמה
This manual provides essential instructions for the safe and efficient operation of your Jackery Explorer 1000 Plus Portable Power Station. Please read this manual thoroughly before using the device and retain it for future reference.
The Jackery Explorer 1000 Plus is a versatile portable power station with a 1264Wh capacity and a 2000W rated output (4000W peak). It features advanced LiFePO4 battery cells, offering a 10-year lifespan and 4,000 charge cycles. The unit supports flexible expansion up to 5kWh with additional battery packs and offers multiple charging options including wall, car, and solar.
2. אויפשטעלן און ערשטע אויפלאדונג
2.1 ונבאָקסינג און דורכקוק
Upon receiving your Jackery Explorer 1000 Plus, carefully unpack all components and inspect for any damage. Ensure all included items are present:
- 1x Jackery Explorer 1000 Plus Portable Power Station
- 1x אַק טשאַרדזשינג קאַבלע
- 1 קס קאַר טשאַרדזשער קאַבלע
- 1x באַניצער מאַנואַל
- 2x DC7909 to DC8020 Adaptors
2.2 ערשט טשאַרדזשינג
It is recommended to fully charge the power station before first use. The device can be charged via wall outlet, car charger, or solar panels.
Figure 1: Three primary methods for charging the Jackery Explorer 1000 Plus. The image displays the power station being charged via solar panels, a wall outlet, and a car charger.
2.2.1 Wall Charging
Connect the AC Charging Cable to the AC input port on the power station and then to a wall outlet. The display will indicate charging status. A full charge from a wall outlet takes approximately 100 minutes.
2.2.2 מאַשין טשאַרדזשינג
Connect the Car Charger Cable to the DC input port on the power station and then to your vehicle's 12V car port. Charging time will vary.
2.2.3 זונ טשאַרדזשינג
Connect compatible solar panels (e.g., Jackery SolarSaga 200W) to the DC input ports using the provided adaptors if necessary. Position the solar panels in direct sunlight for optimal charging. The power station can be fully recharged in approximately 2 hours when connecting up to 4 SolarSaga 200W Solar Panels.
Video 1: Demonstrates the process of connecting Jackery SolarSaga 100W solar panels to the Jackery Explorer 1000 Plus for solar charging. It shows connections for one, two, and four solar panels, along with estimated charging durations.
3. אפערירן די קראפטווערק
3.1 פּאַוערינג אויף / אַוועק
Press and hold the main 'POWER' button for a few seconds to turn the unit on or off. The display screen will illuminate upon activation.
3.2 רעזולטאַט פּאָרץ
The Jackery Explorer 1000 Plus features various output ports:
- AC אַוטלעץ: 2x 120V 2000W Pure Sine Wave outlets. Press the AC button to activate.
- USB-A פּאָרץ: 2x USB-A 18W Max ports. Press the USB button to activate.
- USB-C פּאָרץ: 2x USB-C 100W Max ports. Press the USB button to activate.
- DC Car Port: 1x DC 12V 10A car port. Press the DC button to activate.
Ensure the respective output buttons are pressed to enable power delivery from each port type.
3.3 ווייַז סקרין
The integrated display screen provides real-time information:
- אינפוט/אויטפוט וואסtage: Shows the current power input (charging) and output (discharging) in watts.
- באַטערי פּערסיזtage: ווײַזט די פארבליבענע באַטעריע אָפּצאָל מדרגה.
- איבעריגע צייט: Estimates the remaining runtime or charging time based on current power draw/input.
- טעות ינדיקאַטאָרס: Alerts for overload, over-temperature, or other issues.
3.4 אַפּ קאָנטראָל
Manage and monitor your power station remotely using the Jackery APP via WiFi or Bluetooth. The app allows you to:
- Track remaining battery levels.
- Monitor input and output power.
- Customize settings (e.g., charging mode, auto-off time).
- Control light functions.
Figure 2: A user interacting with the Jackery mobile application to monitor and control the power station, showcasing real-time data and customizable settings.
3.5 עמערגענסי מאַכט צושטעלן (EPS)
The Explorer 1000 Plus features an Emergency Power Supply (EPS) function. When connected to a wall outlet and devices are plugged into the power station, it acts as a pass-through. If grid power fails, the unit automatically switches to battery power within 0.02 seconds, providing continuous power to connected devices.
Figure 3: The Jackery Explorer 1000 Plus operating as an Emergency Power Supply (EPS), providing seamless power during a grid outage with minimal noise.
4. Battery Expansion
The Jackery Explorer 1000 Plus can be expanded to increase its total capacity. It supports up to three additional battery packs, extending the total capacity from 1.25kWh to a mighty 5kWh.
Figure 4: Illustration of the Jackery Explorer 1000 Plus with one and three additional battery packs, demonstrating its expandable capacity up to 5056Wh.
To expand the capacity, connect the expansion battery packs to the designated DC expansion ports on the main unit. Refer to the expansion battery pack's manual for specific connection instructions.
5. וישאַלט און קער
To ensure the longevity and optimal performance of your Jackery Explorer 1000 Plus, follow these maintenance guidelines:
- רעגולער טשאַרדזשינג: For best battery health, fully charge the unit at least once every 3-6 months, even if not in use.
- סטאָרידזש: האַלט די קראַפטווערק אין אַ קיל, טרוקן אָרט אַוועק פון דירעקט זונשייַן און עקסטרעמע טעמפּעראַטורן.
- רייניקונג: ניצט אַ טרוקענעם, ווייכן שטאָף צו רייניקן די אויסערלעכע זייט פון דעם אַפּאַראַט. פֿאַרמייַדט ניצן שטרענגע כעמיקאַלן אָדער שרײַבנדיקע מאַטעריאַלן.
- טעמפּעראַטור: Operate and store the device within the recommended temperature range specified in the specifications.
- באַטאַרייע לעבן: The LiFePO4 battery cells are designed for a 10-year lifespan with 4,000 charge cycles, maintaining over 80% capacity.
- סטאַנדביי מאָדע: The ultra-long standby mode helps reduce power consumption and extends battery life when not actively in use.
6. טראָובלעשאָאָטינג
If you encounter issues with your Jackery Explorer 1000 Plus, refer to the following common troubleshooting steps:
- די אַפּאַראַט איז נישט פּאַוערינג: Ensure the battery is charged. Connect to a power source (wall, solar) and attempt to power on again.
- קיין רעזולטאַט פֿון פּאָרטן: Verify that the specific output button (AC, USB, DC) for the desired port is activated. Check the display for any error indicators.
- אָווערלאָאַד שוץ: If an overload indicator appears, disconnect the device(s) drawing excessive power. Reduce the load and restart the power station. The unit has a 2000W rated output and 4000W peak power.
- איבער-טעמפּעראַטור ווארענונג: If an over-temperature warning appears, disconnect all devices and allow the power station to cool down in a well-ventilated area.
- אַפּ קאַנעקטיוויטי ישוז: Ensure Bluetooth and/or Wi-Fi are enabled on your mobile device and the power station. Try restarting both the app and the power station.
7. ספּעסאַפאַקיישאַנז
| שטריך | באַשרייַבונג |
|---|---|
| סאָרט | דזשאַקקערי |
| מאָדעל נאָמען | JE-1000C |
| קאַפּאַציטעט | 1264ווה |
| רייטאַד רעזולטאַט | 2000 וו |
| שפּיץ רעזולטאַט | 4000 וו |
| באַטערי טיפּ | LiFePO4 |
| טשאַרדזש סייקאַלז | 4,000 (to 80% capacity) |
| לעבן | 10 יאר |
| אַק רעזולטאַט | 2x 120V, 2000W Pure Sine Wave |
| וסב-א רעזולטאַט | 2x 18W מאַקס |
| וסב-C רעזולטאַט | 2x 100W מאַקס |
| DC Car Port Output | 1x 12V 10A |
| וואנט טשאַרדזשינג צייט | בעערעך. 100 מינוט |
| זונ טשאַרדזשינג צייט | Approx. 2 hours (with 4*SolarSaga 200W) |
| יקספּאַנשאַן קאַפּאַביליטי | Up to 3 additional battery packs (5kWh total) |
| דימענסיעס (L X W X H) | 10.24" x 11.24" x 14" |
| וואָג | 32 פונט |
8. וואָראַנטי און שטיצן
8.1 וואָראַנטי אינפֿאָרמאַציע
The Jackery Explorer 1000 Plus Portable Power Station comes with a 5-Year Warranty. Please retain your proof of purchase for warranty claims.
8.2 קונה שטיצן
For further assistance, technical support, or warranty inquiries, please visit the official Jackery website or contact their customer service department. Refer to the included User Manual for specific contact details.
