Timex Men's Deep Water 44mm Watch Instruction Manual

הקדמה

This manual provides essential information for the proper use, care, and maintenance of your Timex Men's Deep Water 44mm Automatic Watch. Designed with nautical influences, this timepiece features a robust stainless-steel case, a scratch-resistant sapphire crystal, and a reliable Japanese automatic movement. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.

בילד: פראָנט view of the Timex Men's Deep Water 44mm Watch, showcasing its black dial, red strap, and gunmetal case. The watch features luminous markers and hands, a date window, and a rotating bezel.

סעטאַפּ

1. Initial Winding (Automatic Movement)

Your Timex Deep Water watch is powered by an automatic mechanical movement. It winds itself with the motion of your wrist. If the watch has stopped or is running low on power, it can be manually wound:

• Ensure the crown is in position 1 (fully pushed in).
• Rotate the crown clockwise approximately 20-30 times. This will provide enough power reserve to start the watch.
• Once worn, the natural motion of your arm will keep the watch wound.

2. באַשטעטיקן צייט און דאַטע

1. אַראָפּשרויפן די קרוין: The crown is a screw-down type for water resistance. Rotate the crown counter-clockwise until it springs out to position 1.
2. שטעלן טאָג: Gently pull the crown out to position 2 (first click). Rotate the crown clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
3. שטעלן צייט: Pull the crown out further to position 3 (second click). The second hand will stop. Rotate the crown to set the hour and minute hands. To ensure accurate time setting, align the minute hand a few minutes past the desired time, then rotate it back.
4. סינגקראַנייז: Once the time is set, push the crown back to position 1 when a time signal (e.g., from a radio or phone) reaches the 12 o'clock mark.
5. Screw Down the Crown: Push the crown firmly back into the case and rotate it clockwise while pushing, until it is securely screwed down. This is crucial for maintaining water resistance.

בילד: זייט פּראָfile of the Timex Deep Water 44mm watch, highlighting the screw-down crown mechanism which is essential for its water resistance.

3. צופּאַסן דעם רימען

The watch features a synthetic rubber strap with quick-release spring bars and a special slip-thru sport closure. To adjust the fit, simply slide the strap through the buckle and secure it at the desired length. The quick-release spring bars allow for easy strap removal and replacement if desired.

בילד: View of the watch from the back, focusing on the red synthetic rubber strap and its unique slip-thru sport closure, designed for comfort and a tucked-away fit.

אַפּערייטינג די וואַך

צייט אפשטעל

Once set, your automatic watch will keep time as long as it is worn regularly or kept on a watch winder. The movement has a power reserve that allows it to run for a period (typically 38-40 hours) when not worn.

ניצן די ראָוטייטינג בעזעל

The unidirectional rotating top ring (bezel) can be used to measure elapsed time, typically for diving or other timed activities. To use:

1. Rotate the bezel counter-clockwise to align the zero marker (triangle) with the minute hand at the start of your activity.
2. Read the elapsed time on the bezel against the minute hand.

וואַסער קעגנשטעל

This watch is water resistant up to 200 meters (660 feet). This makes it suitable for professional marine activity and serious surface water sports, but not for saturation diving. Always ensure the crown is fully screwed down before exposing the watch to water.

• 200 מעטער (20 באַנקאָמאַט): פּאַסיק פֿאַר שווימען, שנאָרקעלינג, און רעקרעאַציאָנעל דייווינג.
• Do not operate the crown or pushers (if any) while the watch is submerged in water.
• Avoid exposing the watch to sudden temperature changes, as this can compromise water seals.

וישאַלט

רייניקונג

צו אויפהאלטן דעם אויסזען פון אייער זייגער:

• ווישט דעם קעסטל און סאַפייער קריסטאַל מיט אַ ווייכן, לינט-פֿרייע שטאָף.
• For the rubber strap, use mild soap and water, then rinse thoroughly and dry.
• After exposure to saltwater, rinse the watch with fresh water and dry it completely.

סטאָרידזש

When not wearing your watch for extended periods, store it in a cool, dry place away from direct sunlight and strong magnetic fields. If you wish for the watch to keep running, consider using a watch winder.

סערוויסינג

Like all mechanical watches, your Timex Deep Water watch requires periodic servicing to ensure optimal performance and longevity. It is recommended to have the watch serviced by an authorized Timex service center every 3-5 years.

בילד: הינטערשטע view of the watch, showing the transparent exhibition case back which allows a clear view of the intricate Japanese automatic movement inside.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

• מאָדעל נומער: TW2W210007U
• קאַסע דיאַמעטער: 44 מם
• באַוועגונג: Japanese Automatic
• קריסטאַל: Sapphire Lens (Scratch-resistant)
• וואַסער קעגנשטעל: 200 מעטער (660 פֿיס)
• רימען מאַטעריאַל: סינטעטיש גומע
• קאַסטן מאַטעריאַל: Stainless Steel (Gunmetal finish)
• רעדל קאָליר: שוואַרץ
• רימען קאָליר: רויט
• פֿעיִקייטן: Date magnifier, Rotating top ring, Super-LumiNova in-fill, Exhibition case back, Quick release spring bars.

וואָראַנטי און שטיצן

Your Timex watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.

For warranty claims, service, or technical support, please contact Timex customer service or visit their official website. Ensure you have your watch model number (TW2W210007U) and proof of purchase available when contacting support.

אפיציעלע טיימעקס Webפּלאַץ: www.timex.com

וויכטיק נאָטעס

No Official Product Videos Found: Based on the provided data, no official product videos from the seller were available for embedding in this manual.