FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk User Manual

1. הקדמה

This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation of your new desk.

Image 1.1: The FLEXISPOT QS2L L-Shaped Standing Desk in a typical office setup, showcasing its spacious desktop and dual monitor capacity.

2. זיכערקייַט אינסטרוקציעס

• זיכער מאַכן אַז אַלע פֿאַרבינדונגען זענען זיכער איידער איר באַניצט דעם טיש.
• האַלט קינדער און חיות אַוועק פון דעם טיש בעת אָפּעראַציע.
• לייגט נישט קיין הענט אדער אנדערע אביעקטן לעבן באַוועגלעכע טיילן פון דעם טיש ראַם.
• The desk does נישט feature an emergency stop function. If an obstacle is encountered during height adjustment, the desk will continue to move, potentially causing damage to the motor or objects. Always ensure the path of movement is clear.
• איבערלאָדן נישט דעם טיש. זעט די ספּעציפֿיקאַציעס פֿאַר מאַקסימום וואָג קאַפּאַציטעט.
• Only use the provided power adapter and control panel.
• If any unusual noise or movement occurs, discontinue use and consult the troubleshooting section.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן צו פֿאַרזאַמלען:

• L-Shaped Desktop (Splice Board)
• 4-Leg Desk Frame Components (Legs, Crossbars, Feet)
• צווייענדיק מאָטאָר סיסטעם
• קאָנטראָל פּאַנעל מיט געפירט ווייַז
• מאַכט אַדאַפּטער און קאַבלע
• Hardware Kit (Screws, Allen Wrenches)
• קאַבלע מאַנאַגעמענט טאַץ

4. סעטאַפּ און אַסעמבלי

Assembly typically requires two people for ease and safety. The desk utilizes primarily two types of screws for most connections.

4.1 ערשט סטעפּס

1. אויספּאַקן אַלע קאָמפּאָנענטן און לייגן זיי אויס אויף אַ ריינער, ווייכער ייבערפלאַך צו פאַרמייַדן קראַצן.
2. Identify and remove any screws used for shipping purposes that secure frame components together. These screws are not part of the final assembly and must be removed to allow proper component separation.

4.2 ראַם אַסעמבלי

1. Assemble the leg columns to the crossbars, ensuring all connections are firm.
2. Attach the feet to the bottom of each leg column.
3. Connect the motor cables to the control box, ensuring they are securely plugged in.

4.3 דעסקטאָפּ אַטאַטשמענט

1. Carefully place the assembled desk frame onto the underside of the L-shaped desktop.
2. Align the pre-drilled holes in the desktop with the mounting points on the frame.
3. Secure the desktop to the frame using the provided screws.

4.4 Control Panel and Power Connection

1. Mount the control panel to the desired location on the underside of the desktop.
2. Connect the control panel cable to the control box.
3. פֿאַרבינדט דעם מאַכט אַדאַפּטער צום קאָנטראָל קעסטל און דערנאָך שטעק עס אַרײַן אין אַ וואַנט אַוטלעט.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1 קאָנטראָל פּאַנעל איבערview

Image 5.1: The intelligent control panel features buttons for height adjustment, a reset function, and two programmable memory presets for sitting and standing positions.

• אַרויף / אַראָפּ אַראָוז: Adjust the desk height manually.
• Reset Button (Middle): Used for initial calibration or resetting the desk.
• Preset 1 (Sitting Icon): Memory preset for a preferred sitting height.
• Preset 2 (Standing Icon): Memory preset for a preferred standing height.

5.2 Initial Calibration (Reset)

After initial setup or if the desk is not moving smoothly, perform a reset:

1. דריקן און האַלטן די באַשטעטיק button (middle button) until the desk moves to its lowest position, then slightly rises. Release the button once movement stops. This calibrates the desk's height sensors.

5.3 הייך צופּאַסן

• דריקן און האַלטן די Up פײַל צו הייבן דעם טיש.
• דריקן און האַלטן די אַראָפּ פײַל צו נידעריקערן דעם טיש.
• באַמערקונג: The desk may continue to move for a short duration after releasing the button. This is normal operation.

5.4 שטעלן זכּרון פּרעסעטס

To save your preferred sitting or standing height:

1. שטעל דעם טיש צו אייער געוואונטשענע הייך מיט די אַרויף/אַראָפּ פײַלן.
2. דרוק און האַלטן די Preset 1 (Sitting) or Preset 2 (Standing) button for approximately five seconds until the display blinks. This indicates the height has been saved.
3. To move the desk to a saved preset height, simply press the corresponding preset button once.

6. פֿעיִקייטן

• Spacious L-Shaped Desktop: The 63" x 43" L-shaped work surface, crafted from environmentally sourced splice board, provides ample space for multiple monitors and office essentials.
• Stable 4-Leg Frame: Constructed with an industrial-grade steel frame, supporting a maximum weight capacity of up to 176 lbs (80 kg).
• צווייענדיק-זtage Legs: Offers continuous height adjustment from 28.3" to 46" (71.9 cm to 116.8 cm).
  

  Image 6.1: Detail of the desk's dual-stage legs, illustrating the continuous height adjustment capability.
• Intelligent LED Control Panel: User-friendly control panel with memory functions for easy adjustment and saving of preferred sitting and standing heights.
• שטיל אָפּעראַציע: Equipped with an ultra-quiet dual motor system, operating below 50dB for a distraction-free work environment.
• סערטיפיצירטע מאַטעריאַלן: Desktop materials are compliant with CARB and TSCA Title VI standards for formaldehyde emission.
  

  Image 6.2: Certifications displayed on the desk surface, indicating compliance with environmental and safety standards.

7. ספּעסאַפאַקיישאַנז

Image 7.1: Dimensional diagram illustrating the desktop size and adjustable height range of the desk frame.

8. וישאַלט

• רייניקונג: ווישט אָפּ די טיש־איבערפֿלאַך און ראַם מיט אַ ווייכן, דamp שטאָף. פֿאַרמײַדט שאַרפֿע כעמיקאַלן אָדער אַברייסיוו רייניגער.
• קשר טשעק: Periodically check all screws and cable connections to ensure they remain tight and secure.
• Obstruction Clearance: Always ensure there are no obstructions above or below the desk when adjusting its height.

9. טראָובלעשאָאָטינג

9.1 Desk Not Moving or Erratic Movement

• טשעק מאַכט: Ensure the power adapter is securely plugged into both the desk and a working wall outlet.
• טשעק קאַנעקשאַנז: Verify all motor and control panel cables are firmly connected to the control box.
• דורכפירן א ריסעט: Follow the initial calibration steps (Section 5.2) by pressing and holding the Reset button until the desk completes its cycle.
• אָווערלאָאַד: Reduce the weight on the desk to ensure it is within the 176 lbs (80 kg) capacity.

9.2 Squeaking During Adjustment

• Ensure all assembly screws are tightened. Loose connections can sometimes cause noise.
• If squeaking persists, contact customer support. Do not attempt to lubricate internal motor components.

9.3 Monitor Arm / Keyboard Tray Interference

• Due to the design of the desk frame, the frame may be close to the edge of the desktop. This can affect the mounting of some monitor arm clamps or the clearance for certain keyboard trays. Consider alternative mounting solutions or desk accessories if interference occurs.

9.4 Visible Desktop Seam

• The desktop is a splice board design, meaning it consists of multiple sections joined together. A visible seam where these sections meet is a characteristic of this design and not a defect.

10. וויכטיגע באַטראַכטונגען

• Adjustment Speed: The desk adjusts height at a controlled speed. This is a design feature to ensure stability and safety during movement.
• קאַבלע פאַרוואַלטונג: While a cable management tray is included, consider additional cable ties or routing solutions to keep cables tidy, especially for the motor connection cable.