Pro-Ject VC-S3 (Model 9120122295748)

Pro-Ject VC-S3 Premium Record Cleaning Machine User Manual

Model: VC-S3 (9120122295748) | Brand: Pro-Ject

הקדמה

The Pro-Ject VC-S3 is a premium record cleaning machine designed to effectively remove dirt, dust, and static from your vinyl records, ensuring optimal playback quality and longevity. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your VC-S3 unit.

Pro-Ject VC-S3 Premium Record Cleaning Machine, angled view

בילד: ווינקלדיק view of the Pro-Ject VC-S3 Premium Record Cleaning Machine, showcasing its silver finish and compact design. A record is placed on the platter with the vacuum arm positioned over it.

פּראָדוקט פֿעיִקייטן

סעטאַפּ

  1. אויספּאַקן: Carefully remove the VC-S3 unit and all accessories from its packaging. Retain packaging for future transport or storage.
  2. אָרט: Place the machine on a stable, level surface away from direct sunlight, heat sources, and excessive dust. Ensure adequate ventilation around the unit.
  3. מאַכט קשר: Connect the provided power cable to the VC-S3 and then to a suitable wall outlet. Ensure the power switch is in the "Off" position before connecting.
  4. Fluid Preparation: Prepare your record cleaning fluid according to its manufacturer's instructions. Pro-Ject recommends using their "Wash it" cleaning fluid for optimal results.
Top view of Pro-Ject VC-S3 with a record on the platter

בילד: פון אויבן אַראָפּ view of the Pro-Ject VC-S3, showing a vinyl record placed on the central spindle and the vacuum arm positioned to the right.

אַפּערייטינג ינסטראַקשאַנז

Follow these steps for effective record cleaning:

  1. אָרט רעקאָרד: Carefully place the record onto the spindle, ensuring it sits flat. Secure it with the record clamp.
  2. Apply Fluid: Apply a small amount of cleaning fluid evenly across the record surface. Use a dedicated brush (not included) to gently spread the fluid.
  3. אָנהייב מאָטאָר: Flip the "MOTOR" switch to the "I" position to start the platter rotation. Allow the fluid to work for a few rotations.
  4. Engage Vacuum: Flip the "VACUUM" switch to the "I" position to activate the vacuum suction. The vacuum arm will draw the fluid and contaminants from the record surface.
  5. Dry Record: Allow the vacuum to operate for 1-2 rotations (approximately 2 seconds) until the record surface appears dry. For heavily soiled records, a second application and vacuum cycle may be necessary.
  6. האַלטן אָפּעראַציע: First, flip the "VACUUM" switch to "O", then the "MOTOR" switch to "O".
  7. Remove Record: Carefully remove the record clamp and then the cleaned record.
Close-up of the motor and vacuum switches on the Pro-Ject VC-S3

בילד: נאָענט-אַרויף view of the two toggle switches on the side of the Pro-Ject VC-S3, labeled "MOTOR" and "VACUUM", indicating their on/off positions.

וישאַלט

טראָובלעשאָאָטינג

פּראָבלעםמעגלעך סיבהלייזונג
Record not drying completely or wet streaks remain.
  • Insufficient vacuum time.
  • Worn or dirty vacuum arm felt strips.
  • Waste tank is full.
  • Record warpage preventing full contact.
  • Increase vacuum time to 2-3 rotations.
  • Clean or replace felt strips.
  • Empty the waste tank.
  • Ensure record is as flat as possible; apply gentle pressure to the vacuum arm if necessary (with caution).
מאַשין צינדט זיך נישט אָן.
  • מאַכט קאַבלע איז נישט קאָננעקטעד.
  • קיין עלעקטרע פון ​​דער אַוטלעט.
  • Check power cable connection to unit and wall outlet.
  • טעסט די אַוטלעט מיט אַן אַנדער דעווייס.
Motor or vacuum not engaging.
  • Switches not fully engaged.
  • אינערלעכער שולד.
  • Ensure switches are firmly in the "I" position.
  • אויב די פּראָבלעם בלייבט, קאָנטאַקטירט קונה שטיצע.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

Specific warranty terms and detailed support contact information are not provided in this document. For warranty claims, technical support, or service inquiries, please refer to the official Pro-Ject Audio Systems website or contact your authorized dealer. Keep your proof of purchase for warranty purposes.

You can visit the official Pro-Ject store on Amazon for more information: Pro-Ject Audio Systems Store

פֿאַרבונדענע דאָקומענטן - VC-S3 (Model 9120122295748)

Preview פּראָ-דזשעקט VC-S2 אַלו רעקאָרד רייניקונג מאַשין אינסטרוקציעס פֿאַר נוצן
דאס דאקומענט גיט אינסטרוקציעס פאר באנוץ, אויפשטעל, אויפהאלטונג, און פראבלעם-לייזונג פאר די פרא-דזשעקט VC-S2 ALU רעקארד רייניקונג מאשין. עס נעמט אריין זיכערהייט מיטלען, קאמפאנענט באשרייבונגען, און גאראנטיע אינפארמאציע.
Preview פּראָ-דזשעקט ט1, ט1 פאָנאָ סב, ט1 בי טי טורנטייבל באַניצער מאַנואַל און סעטאַפּ גייד
קאָמפּרעהענסיווע אינסטרוקציעס פֿאַר אויפֿשטעלן, אָפּערירן און וישאַלטן אייערע פּראָ-דזשעקט T1, T1 פאָנאָ SB און T1 BT טורנטייבאַלז. כולל טעכנישע ספּעציפֿיקאַציעס, פּראָבלעם לייזונג און וואָראַנטי אינפֿאָרמאַציע.
Preview פּראָ-דזשעקט A1 טורנטייבל: באַניצער מאַנואַל, סעטאַפּ, און ספּעסיפיקאַציעס
קאָמפּרעהענסיווע אינסטרוקציעס פֿאַר אויפֿשטעלן, אָפּערירן און אויפֿהאַלטן אייער פּראָ-דזשעקט A1 דרייפּלאַץ. כולל טעכנישע ספּעציפֿיקאַציעס, עצות פֿאַר פּראָבלעם-לייזונג און וואָראַנטי אינפֿאָרמאַציע.
Preview פּראָ-דזשעקט X8 B טורנטייבל: אינסטרוקציעס פֿאַר באַניץ, סעטאַפּ און ספּעציפֿיקאַציעס
אן אויספירלעכע אנווייזונג פארן פרא-דזשעקט X8 B דריי-טיש, וואס באדעקט סעטאפ, אינסטאלאציע, אפעראציע, אויפהאלטונג, טעכנישע ספעציפיקאציעס, פראבלעם-לייזונג, און גאראנטיע אינפארמאציע.
Preview פּראָ-דזשעקט A1 טורנטייבל באַניצער מאַנואַל
אינסטרוקציעס פֿאַר באַניץ און סעטאַפּ פון די פּראָ-דזשעקט A1 דריי-טיש, אַרייַנגערעכנט טעכנישע ספּעציפֿיקאַציעס, וישאַלט און טראָובלעשווטינג לייזונג.
Preview פּראָ-דזשעקט פאָנאָ קאַרטרידזש און סטיילוס זאָרג גייד
לערנט זיך ווי אזוי צו זאָרגן פֿאַר אייער פּראָ-דזשעקט פאָנאָ קאַרטרידזש, אַרייַנגערעכנט סטילוס רייניקונג, רעקאָרד רייניקונג מיט פּראָ-דזשעקט בראַש-איט, און סטילוס פאַרבייַט. די גייד דעקט די וויכטיקע טיילן פון אַ פאָנאָ קאַרטרידזש און גיט אינסטרוקציעס פֿאַר וישאַלט.