XPG קאָר רעאַקטאָר II 850W מאָדולאַר מאַכט צושטעלן באַניצער מאַנואַל

1. הקדמה

The XPG Core Reactor II 850W Modular Power Supply is engineered to deliver stable and efficient power to your computing system. Compliant with the Intel ATX 3.0 design guide and featuring an 80 PLUS Gold certification, this power supply ensures reliable performance for a wide range of PC builds. Its fully modular design simplifies cable management, contributing to a cleaner and more organized internal setup.

Figure 1: XPG Core Reactor II 850W Power Supply

2. פּעקל אינהאַלט

באַשטעטיקט אַז אַלע זאכן וואָס זענען ליסטעד אונטן זענען אַרייַנגערעכנט אין דיין פּראָדוקט פּעקל:

• XPG Core Reactor II 850W Modular Power Supply Unit
• Modular Cable Set (including 12VHPWR cable)
• אַק מאַכט שנור
• מאַונטינג סקרוז
• באַניצער מאַנואַל (דעם דאָקומענט)

3. פֿעיִקייטן

• Intel ATX 3.0 Design Guide Compliant: Equipped with a 12VHPWR (12+4) Connector for next-generation GPUs.
• Certified GOLD Efficiency: Achieves high efficiency ratings by both 80 PLUS and Cybenetics, reducing energy waste and heat generation.
• Premium Japanese Capacitors: Utilizes 100% Japanese 105℃ Capacitors for enhanced stability and long-term reliability.
• Fluid Dynamic Bearing (FDB) Fan: Features an FDB fan with intelligent fan control for quiet operation and efficient cooling.
• Available in Multiple Wattagעס: Models available in 1200W, 1000W, 850W, 750W, and 650W to suit various system requirements.

Figure 2: ATX 3.0 and 12VHPWR Connector Details

Figure 3: Japanese 105°C Capacitors

4. ספּעסאַפאַקיישאַנז

Figure 4: Cable Configuration for Core Reactor II Series

5. סעטאַפּ

Follow these steps to properly install your XPG Core Reactor II 850W Power Supply:

1. צוגרייטן אייער סיסטעם: Ensure your computer is powered off and unplugged from the wall. Open your PC case to access the power supply mounting area.
2. מאָנטירן די PSU: Secure the XPG Core Reactor II PSU into the designated power supply bay in your PC case using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards or towards an intake vent).
3. פֿאַרבינדן וויכטיקע קאַבלען:
   • 24-Pin ATX Motherboard Cable: Connect the large 24-pin cable from the PSU to the corresponding port on your motherboard.
   • CPU Power Cables: Connect the 4+4-pin or 8-pin CPU power cables to the CPU power headers on your motherboard. Modern motherboards may require two such connections.
   • GPU Power Cables: For graphics cards requiring a 12VHPWR connector, use the dedicated 12VHPWR (12+4) cable. For other GPUs, use the appropriate 6+2-pin PCI-E cables. Ensure all connections are fully seated.
   • SATA/Molex Cables: פֿאַרבינדט SATA מאַכט קייבלס צו אייערע סטאָרידזש דרייווס (SSDs, HDDs) און Molex קייבלס צו יעדע אַנדערע פּעריפערישע דעוויסעס וואָס דאַרפן זיי.
4. קאַבלע פאַרוואַלטונג: Utilize the fully modular design to connect only the necessary cables, improving airflow and aesthetics within your case. Route cables neatly to prevent obstruction.
5. לעצט טשעק: Double-check all connections to ensure they are secure. Close your PC case.

Figure 5: Modular Cable Ports

פיגורע 6: זייַט View of Modular Connections

6. אַפּערייטינג ינסטרוקטיאָנס

After successful installation, connect the AC power cord to the PSU and then to a wall outlet. Flip the main power switch on the back of the PSU to the 'ON' position. You can then power on your computer as usual.

The XPG Core Reactor II features an intelligent FDB fan control. The fan operates silently at low loads and adjusts its speed dynamically to maintain optimal temperatures under heavier loads. This ensures efficient cooling without unnecessary noise.

Figure 7: Main Power Switch and AC Inlet

7. וישאַלט

To ensure the longevity and optimal performance of your power supply, consider the following maintenance tips:

• האַלטן עס ריין: Periodically clean the exterior of the power supply and its fan grill to prevent dust buildup, which can impede airflow and cooling efficiency. Use compressed air for hard-to-reach areas.
• פאַרזיכערן געהעריק ווענטאַליישאַן: Make sure your PC case has adequate airflow and that the power supply's intake and exhaust vents are not obstructed.
• ויסמיידן אָווערלאָאַדינג: Ensure your system's power consumption does not consistently exceed the PSU's rated wattage.

8. טראָובלעשאָאָטינג

If you encounter issues with your XPG Core Reactor II 850W Power Supply, try the following steps:

• קיין מאַכט:
  • קאָנטראָלירט צי דער AC מאַכט שנור איז זיכער פארבונדן צו ביידע די PSU און די וואַנט אַוטלעט.
  • זיכער מאַכן אַז דער הויפּט מאַכט קנעפל אויף די PSU איז אין די 'ON' פּאָזיציע.
  • Verify that the 24-pin ATX and CPU power cables are correctly and firmly connected to the motherboard.
• סיסטעם אינסטאביליטעט/רענדאם אפשטעלונגען:
  • Ensure all component power cables (GPU, CPU, etc.) are securely connected.
  • Confirm that your system's total power draw does not exceed the 850W capacity of the PSU. High-end components, especially GPUs, can have significant power spikes.
  • קאָנטראָלירט פֿאַר געהעריקע ווענטילאַציע אין אייער פּיסי קעסטל צו פאַרמייַדן איבערהיצונג.
• ומגעוויינטלעך ראַש:
  • If the fan is unusually loud, ensure it is not obstructed by cables or dust.
  • A slight buzzing noise under heavy load can sometimes occur with certain components; however, persistent loud or grinding noises may indicate a fan issue.

If issues persist after following these steps, please contact XPG customer support.

9. וואָראַנטי און שטיצן

The XPG Core Reactor II 850W Modular Power Supply comes with a 10-יאָר וואָראַנטי, וואָס זיכערט לאַנג-טערמין פאַרלעסלעכקייט און שלום פון גייַסט. די וואָראַנטי דעקט חסרונות אין מאַטעריאַלן און אַרבעט אונטער נאָרמאַל נוצן.

For technical support, warranty claims, or further assistance, please visit the official XPG webזייטל אדער קאנטאקט זייער קאסטומער סערוויס דעפארטמענט. האלט אייער באווייז פון קויפן פאר גאראנטיע וואַלידאציע.

פאַבריקאַנט: ADATA

מאָדעל נומער: COREREACTORII850G-BKCUS