Rothenberger TP 25 Manual Pressure Test Pump User Manual

1. הקדמה

This manual provides instructions for the safe and effective operation, setup, maintenance, and troubleshooting of the Rothenberger TP 25 Manual Pressure Test Pump. The TP 25 is designed for quick compression testing and leak testing of smaller pipe systems and containers in plumbing and heating installations. It is capable of performing accurate pressure tests up to 25 bar (360 PSI).

The pump features a corrosion-resistant steel tank with DURAMANT coating for enhanced durability. Its efficient power pump provides controlled pressure buildup with a 16 ml/stroke capacity, ensuring consistent test results. High-quality precision valves are integrated to maintain stable pressure without fluctuations, contributing to dependable testing accuracy.

2. זיכערקייַט אינפֿאָרמאַציע

Always adhere to the following safety guidelines to prevent injury and damage to the equipment:

• לייענט און פֿאַרשטייט אַלע אינסטרוקציעס איידער איר באַניצט די פּאָמפּע.
• טראָגט פּאַסיקע פּערזענלעכע שוץ-עקוויפּמענט (PPE), ווי זיכערהייטס-ברילן און הענטשקעס.
• Ensure the system being tested is depressurized before connecting or disconnecting the pump.
• Do not exceed the maximum operating pressure of 25 bar (360 PSI).
• Use only clean water or approved test fluids. Do not use corrosive or flammable liquids.
• Inspect the pump, hose, and connections for damage before each use. Do not use damaged equipment.
• האַלטן קינדער און אַנאָטערייזד פּערסאַנעל אַוועק פון די אַרבעט געגנט.
• Secure all connections tightly to prevent leaks during testing.

3. פּראָדוקט קאַמפּאָונאַנץ

The Rothenberger TP 25 Manual Pressure Test Pump consists of the following main components:

• פּאָמפּע גוף: The main unit housing the tank and pumping mechanism.
• אפערירן הייבער: Used to manually build pressure within the system.
• דרוק מאָס: Displays the current pressure in bar and PSI.
• קישקע קשר: Point for attaching the test hose to the pump.
• Test Hose: Connects the pump to the system under test.
• וואַלוועס: Control the flow of fluid and pressure release.
• וואַסער טאַנק: 7-liter capacity reservoir for test fluid.

פיגורע 1: קוילעלדיק view of the Rothenberger TP 25 Manual Pressure Test Pump, showing the red tank, grey pump mechanism, black operating handle, and connected test hose.

פיגורע 2: נאָענט-אַרויף view of the pump's control panel, highlighting the pressure gauge and adjustment knobs.

פיגורע 3: דעטאַילעד view of the test hose connector, showing its threaded design for secure attachment.

4. סעטאַפּ

1. אָפּלייגן און דורכקוקן: Carefully remove the pump from its packaging. Inspect all components for any signs of damage. Do not proceed if any part is damaged.
2. שטעלט די פּאָמפּע: Place the pump on a stable, level surface near the system to be tested.
3. פּלאָמבירן דעם טאַנק: Open the tank lid and fill the 7-liter reservoir with the appropriate test fluid (e.g., clean water, glycol solution). Ensure the fluid level is sufficient for the test.
4. Connect the Test Hose: Securely attach one end of the test hose to the pump's hose connection. Connect the other end of the test hose to the system or pipe network that requires pressure testing. Ensure all connections are tight to prevent leaks.
5. Purge Air (Optional but Recommended): If testing a water system, it is advisable to purge air from the system by allowing water to flow through until no air bubbles are visible before sealing the system for pressure testing.

5. אַפּערייטינג ינסטרוקטיאָנס

Follow these steps to perform a pressure test:

1. Ensure System Readiness: Verify that the system to be tested is properly sealed and ready for pressure application.
2. Open Pump Valve: Ensure the valve on the pump that connects to the test hose is open.
3. Build Pressure: Operate the pump lever by moving it up and down. This action will draw fluid from the tank and push it into the connected system, gradually building pressure.
4. מאָניטאָר דרוק: Continuously observe the pressure gauge. Pump until the desired test pressure (up to a maximum of 25 bar / 360 PSI) is reached.
5. Isolate Pressure: Once the target pressure is achieved, close the valve on the pump to isolate the system and maintain the pressure.
6. Observe for Leaks: Allow the system to remain under pressure for a specified period (e.g., 30 minutes, 1 hour, or as required by local codes). Monitor the pressure gauge for any drop in pressure, which indicates a leak. Visually inspect all connections and components of the system for signs of fluid leakage.
7. ארויסלאָזן דרוק: After the test is complete, slowly open the pressure release valve on the pump to gradually reduce the pressure in the system.
8. דיסקאַנעקט: Once the pressure has returned to zero, disconnect the test hose from the system and the pump.

6. וישאַלט

Regular maintenance ensures the longevity and reliable performance of your Rothenberger TP 25 pump:

• אויסטריקענען נאך באנוץ: Always drain any remaining test fluid from the tank after each use.
• ריין די פּאָמפּע: Clean the pump body and hose with a damp cloth. Avoid using harsh chemicals that could damage the DURAMANT coating or other components.
• דורכקוקן די שלאַנג און פֿאַרבינדונגען: Regularly check the test hose for cracks, kinks, or wear. Ensure all connectors are clean and free of debris.
• שמירן: Periodically check moving parts for smooth operation. Consult a qualified technician for any lubrication requirements.
• סטאָרידזש: Store the pump in a clean, dry place, away from extreme temperatures and direct sunlight.
• מאָס קאַלאַבריישאַן: If you suspect the pressure gauge is inaccurate, have it calibrated by a certified professional.

7. טראָובלעשאָאָטינג

זעט די פאלגנדע טאבעלע פאר אלגעמיינע פראבלעמען און זייערע מעגליכע לייזונגען:

8. ספּעסאַפאַקיישאַנז

• סאָרט: ראטנבערגער
• מאָדעל נומער: 60250
• מאַטעריאַל: אַללוי סטיל
• קאָליר: Black/Silver/Red
• פּראָדוקט דימענשאַנז: 15.35"L x 6.69"W (39 cm Length)
• נומער וואָג: 0.6 קילאָגראַמס (1.32 פונט)
• מאַקסימום דרוק: 25 באַרס (360 PSI)
• טאַנק קאַפּאַציטעט: 7 ליטער
• Power Pump Capacity: 16 ml/stroke

9. וואָראַנטי און שטיצן

For warranty information, technical support, or service inquiries, please refer to the official Rothenberger webזייטל אדער קאנטאקט זייער קאסטומער סערוויס דעפארטמענט. האלט אייער קויף קוויטל אלס באווייז פון קויפן פאר יעדע גאראנטיע טענות.