לאָקיטאָר J3250 פּראָ דזשאַמפּ סטאַרטער באַניצער מאַנואַל

1. הקדמה

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. זיכערקייַט אינפֿאָרמאַציע

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• אויג שוץ: Always wear safety glasses when working with batteries.
• ווענטילאַטיאָן: ניצן די מיטל אין אַ געזונט-ווענאַלייטיד געגנט.
• קינדער: האַלטן די מיטל אויס פון דערגרייכן פון קינדער.
• קורץ קרייַז: דו זאלסט נישט לאָזן די רויט און שוואַרץ קלamps to touch each other or the same metal object.
• פאַרקערט פּאָולעראַטי: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
• נעץ: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
• שעדיקן: Do not use the device if it is damaged. Contact customer support for assistance.
• טעמפּעראַטור: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltagע, איבער-לאסט, איבער-לאדונג, און איבער-קראַנט שוץ.

3. פּראָדוקט איבערview

3.1 וואָס איז אין דער קעסטל

• LOKITHOR J3250 PRO Jump Starter Unit
• דזשאַמפּער סטאַרטער קלamps
• וסב-א צו וסב-C קאַבלע
• וסב-C צו וסב-C קאַבלע
• 12 וו אַדאַפּטער
• אַקסעסאָריעס סטאָרידזש זעקל
• באַניצער מאַנואַל

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 שליסל פֿעיִקייטן

• High Starting Current: ברענגט 3250 Amp peak current for reliable vehicle starting.
• מאָטאָר קאַמפּאַטאַבילאַטי: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
• LiFePO4 Battery Technology: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
• אַוואַנסירטע זיכערקייַט: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
• 100W Two-way Fast Charging: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
• ConnectMax Technology: Automatically detects clamp connection impedance to optimize starting efficiency.
• פּאָרטאַטיוו מאַכט באַנק: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
• 400-Lumen LED Flashlight: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
• דוראַבאַל פּלאַן: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
• לאנג סטאַנדביי צייט: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

The J3250 PRO provides 3250A peak current, suitable for large engines.

The device features an IP65 rating for water and dust resistance.

4. סעטאַפּ און טשאַרדזשינג

4.1 ערשט טשאַרדזשינג

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

1. Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1 Jump Starting a Vehicle (Normal Mode)

Use Normal Mode for vehicles with a partially discharged battery.

1. צוטשעפּען קלamps: פאַרבינדן די רויט (+) קלamp to the positive terminal of the vehicle battery. Connect the black (-) clamp צו די נעגאַטיוו וואָקזאַל פון די פאָרמיטל באַטאַרייע.
2. מאַכט אויף: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
3. אָנהייבן פאָרמיטל: אָנהייב דיין פאָרמיטל.
4. אויסלעשן און אָפּטיילן: Once the vehicle starts, power off the jump starter and immediately disconnect the clampס פון די פאָרמיטל באַטאַרייע.

Steps for jump starting a vehicle using Normal Mode.

5.2 Jump Starting a Vehicle (Boost Mode)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

1. צוטשעפּען רויטע קלamp: פאַרבינדן די רויט (+) קלamp צו די positive וואָקזאַל פון די פאָרמיטל באַטאַרייע.
2. Activate Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
3. צוטשעפּען שוואַרצע קלamp: פאַרבינדן די שוואַרץ (-) קלamp צו די נעגאַטיוו וואָקזאַל פון די פאָרמיטל באַטאַרייע.
4. אָנהייבן פאָרמיטל: Start your vehicle within 30 seconds of activating Boost Mode.
5. אויסלעשן און אָפּטיילן: Once the vehicle starts, power off the jump starter and immediately disconnect the clampס פון די פאָרמיטל באַטאַרייע.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 ניצן ווי אַ פּאָרטאַטיוו פּאַוער באַנק

The J3250 PRO can charge various electronic devices.

• Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
• The device will automatically begin charging.

The J3250 PRO can charge multiple electronic devices.

5.4 ניצן די LED פלאַשליכט

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

• Press the flashlight button once for constant illumination.
• Press again to cycle through Strobe and SOS modes.
• דרוק אַ פערט מאָל צו קער אַוועק די פלאַשליגהט.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. וישאַלט

• ריטשאַרדזש קעסיידער: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
• סטאָרידזש: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
• רייניקונג: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamp זאָרגן: פאַרזיכערן די קלamps are clean and free of corrosion for optimal connection.

The J3250 PRO maintains charge for up to 42 months in standby.

7. טראָובלעשאָאָטינג

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

• מיטל נישט קער אויף: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
• Vehicle Not Starting (Normal Mode):
  • קוק אַז די קלampזענען זיכער פארבונדן צו די ריכטיקע באַטעריע טערמינאַלן (רויט צו פּאָזיטיוו, שוואַרץ צו נעגאַטיוו).
  • Ensure the vehicle battery terminals are clean and free of corrosion.
  • If the vehicle battery is completely dead, try using בוסט מאָדע.
• Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
• Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
• דיווייס אָוווערכיטינג: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
• טשאַרדזשינג ישוז: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

If problems persist, please contact LOKITHOR customer support.

8. ספּעסאַפאַקיישאַנז

The J3250 PRO is designed to operate in a wide range of temperatures.

9. וואָראַנטי און שטיצן

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webזייטל אדער קאנטאקט זייער קאסטומער סערוויס דעפארטמענט גלייך. האלט אייער קויף קוויטל אלס באווייז פון קויפן פאר גאראנטיע קליימס.

If you have any after-sales questions, please feel free to contact us.