ANCEL BD500 בלועטוט OBD2 סקענער באַניצער מאַנואַל

1. הקדמה

The ANCEL BD500 is a versatile Bluetooth 5.0 OBD2 scanner designed to provide comprehensive diagnostic capabilities for Volkswagen, Audi, Seat, and Skoda (VAG) vehicles, as well as standard OBD2 functions for most other car brands. This manual provides detailed instructions for setting up, operating, and maintaining your BD500 device to effectively diagnose and resolve vehicle issues.

2. פּעקל אינהאַלט

Upon unboxing your ANCEL BD500, please verify that all items listed below are present:

• 1x ANCEL BD500 Bluetooth Code Reader
• 1 קס סטאָרידזש באַג

3. סעטאַפּ

3.1. אַפּ ינסטאַללאַטיאָן

The ANCEL BD500 operates via a dedicated smartphone application. Please download and install the official ANCEL app from your device's app store:

• פֿאַר iPhone / iPad: זוכן פֿאַר "ANCEL" in the Apple App Store.
• פֿאַר אַנדרויד דעוויסעס: זוכן פֿאַר "ANCEL" in the Google Play Store.

3.2. מיטל קאַנעקשאַן

1. Locate your vehicle's OBD2 port. This is typically found under the dashboard on the driver's side.
2. Ensure your vehicle's ignition is turned to the ON position, but the engine is OFF.
3. Plug the ANCEL BD500 device firmly into the OBD2 port. The device will power on automatically.
4. געבן בלועטאָאָטה אויף דיין סמאַרטפאָנע אָדער טאַבלעט.
5. Open the ANCEL app. The app will automatically scan for and connect to the BD500 device via Bluetooth 5.0. Follow any on-screen prompts to establish the connection.

4. Operating - VAG Vehicle Diagnostics

For Volkswagen, Audi, Seat, and Skoda (VAG) vehicles, the ANCEL BD500 offers manufacturer-level diagnostic capabilities. This allows for in-depth analysis beyond standard OBD2 functions.

4.1. Full System Scan

The BD500 can read and clear Diagnostic Trouble Codes (DTCs) from all control modules within your VAG vehicle, including but not limited to:

• מאָטאָר קאָנטראָל מאָדולע (ECM)
• טראַנסמיסיע קאָנטראָל מאָדולע (TCM)
• Supplemental Restraint System (SRS) - Airbag
• רייַף דרוק מאָניטאָרינג סיסטעם (TPMS)
• אַנטי-לאַק ברייקינג סיסטעם (ABS)
• סטירינג ווינקל סענסאָר (SAS)
• עלעקטראָנישע סטאַביליטעט פּראָגראַם (ESP)
• Body, Chassis, and Powertrain modules

To perform a full system scan, navigate to the "Diagnostic" section in the app and select the VAG-specific option. The app will guide you through the scanning process, displaying any detected fault codes and their descriptions.

5. Operating - General OBD2 Diagnostics (Non-VAG Vehicles)

For non-VAG vehicle models, the ANCEL BD500 functions as a standard OBD2 scanner, providing essential engine diagnostics.

5.1. Engine Diagnostics

The device can read and erase generic Diagnostic Trouble Codes (DTCs) that cause emission-related issues. Key functions include:

• לייענען און ויסמעקן DTCs: View and remove engine fault codes.
• Turn Off MIL: Extinguish the Check Engine Light (Malfunction Indicator Lamp).
• I/M גרייטקייט: קאָנטראָלירט דעם סטאַטוס פון עמיסיע-פֿאַרבונדענע מאָניטאָרינג סיסטעמען.
• לעבעדיקע דאַטן סטרים: Display real-time sensor data from the engine.
• פאָרמיטל אינפֿאָרמאַציע: Retrieve Vehicle Identification Number (VIN), Calibration ID (CIN), and Calibration Verification Number (CVN).

6. Operating - Special Functions

The ANCEL BD500 includes several special functions to assist with vehicle maintenance and service resets.

6.1. EPB Reset (Electronic Parking Brake)

This function is crucial when replacing brake pads on vehicles equipped with an electronic parking brake. It allows you to safely retract and then reset the electronic parking brake system.

6.2. Service Reset

The device supports various service resets, including:

• אויל סערוויס איבערשטעלן: Reset the oil change reminder light after an oil change.
• Inspection Service Reset: Reset the service interval indicator.

6.3. Throttle Learning (ETC Reset)

This function is used to reset the throttle body's learned values, often performed after cleaning or replacing the throttle body to ensure proper idle speed and engine response.

6.4. באַטערי טשעק

The BD500 can perform a battery check, specifically supporting 12V vehicle battery voltage detection. This provides a reference for the battery's health.

6.5. Performance Test

The device offers unique features to test brake performance and graphically display voltage changes (start voltage) over time, providing detailed numerical analysis for each trip.

7. וישאַלט

7.1. ווייכווארג דערהייַנטיקונגען

To ensure optimal performance and compatibility with the latest vehicle models and diagnostic protocols, it is recommended to regularly update the BD500's software. Updates are typically performed by connecting the device to a computer via USB and downloading the latest firmware from the ANCEL official website. Refer to the ANCEL website for specific instructions and software download tools.

8. טראָובלעשאָאָטינג

If you encounter issues while using your ANCEL BD500, please consider the following common troubleshooting steps:

• קשר ישוז: Ensure the BD500 is firmly plugged into the OBD2 port and the vehicle's ignition is ON. Verify Bluetooth is enabled on your smartphone and the ANCEL app is open.
• אַפּ ניט ריספּאַנדינג: Close and restart the ANCEL app. Ensure your smartphone's operating system is up to date.
• ומפּינקטלעך רידינגז: Ensure the device's software is updated to the latest version. For non-VAG vehicles, remember that only engine-related diagnostics are supported.
• פאָרמיטל קאַמפּאַטאַבילאַטי: Confirm your vehicle's make, model, and year are supported by the BD500 for the desired diagnostic functions (especially for VAG-specific features).

For further assistance, utilize the "Feedback" or "Help" sections within the ANCEL app, or visit the official ANCEL support webפּלאַץ.

9. ספּעסאַפאַקיישאַנז

10. וואָראַנטי און שטיצן

The ANCEL BD500 comes with a standard manufacturer's warranty. For specific warranty terms, technical support, or service inquiries, please refer to the official ANCEL website or contact ANCEL customer support directly. Contact information can typically be found in the "Help" or "Feedback" sections of the ANCEL app.