diymore 30A 12V/24V PWM Solar Charge Controller Instruction Manual

1. הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your diymore 30A 12V/24V PWM Solar Charge Controller. This intelligent controller is designed to manage the power flow from your solar panel to your battery, ensuring efficient charging and protecting your battery from overcharge and over-discharge. It features a large LCD screen, dual USB outputs, and comprehensive 3-stagE PWM אָפּצאָל פאַרוואַלטונג.

שליסל פֿעיִקייטן:

• Light control and time control discharge functionality.
• Compatible with lead-acid batteries (OPEN, AGM, GEL).
• 3-stage PWM charge management: direct charge, boost charge, and float charge.
• Dual MOS reverse current protection, low heat generation.
• Built-in overcurrent, short-circuit, open-circuit, and reverse connection protection.
• Dual USB output (5V/2A Max) for mobile phone charging.
• Automatic 12V/24V voltagE לעגיטימאַציע.

2. זיכערהייט אינפֿאָרמאַציע און פאָרזיכטיגקייטן

Please read all safety instructions carefully before installation and operation to prevent damage to the controller, battery, or other components.

• This solar charge controller is designed exclusively for פירן-זויער באַטעריז (OPEN, AGM, GEL). Do not use it with other battery types, including lithium batteries or nickel-metal hydride batteries.
• The controller can only use photovoltaic panels as its power source. Do not use DC or other power sources as a power source.
• Ensure the battery has sufficient voltage for the controller to recognize its type (12V or 24V) during the first installation.
• Install the controller close to the battery to minimize voltage drop due to excessive wire length, which can affect accurate voltagE דיטעקשאַן.
• The controller will generate heat during operation. Install it on a flat, well-ventilated surface to ensure proper heat dissipation.
• Always connect the components in the specified order to avoid damage.

3. פּראָדוקט איבערview

Familiarize yourself with the components and display of the solar charge controller.

פיגורע 1: פראָנט view of the diymore 30A 12V/24V PWM Solar Charge Controller, showing the LCD display, control buttons, and USB ports.

פיגורע 2: דעטאַילעד view of the LCD display and control buttons. The display shows voltagE, פּראָצענטtage, and icons for solar panel, battery, and load. Buttons are labeled for Menu, Up, and Down/Manual.

The LCD screen displays various parameters such as voltage, charging/discharging current, accumulated electricity generation, temperature, and battery status. The three buttons below the screen are used for navigation and setting adjustments.

4. סעטאַפּ און ייַנמאָנטירונג

Follow these steps for proper installation of the solar charge controller. Ensure all connections are secure and correct to prevent damage.

1. צוגרייטן די אינסטאַלאַציע אָרט: Choose a flat, well-ventilated surface near the battery. Avoid direct sunlight, high temperatures, and humid environments.
2. פאַרבינדן די באַטאַרייע: Connect the positive and negative terminals of the battery to the corresponding battery terminals on the controller. The controller will automatically detect the battery voltage (12V or 24V). Ensure the battery has sufficient charge for detection.
3. פאַרבינדן די זונ פּאַנעל: Connect the positive and negative terminals of the solar panel to the corresponding solar panel terminals on the controller.
4. פֿאַרבינדן די לאַסט: Connect the positive and negative terminals of your DC load to the corresponding load terminals on the controller. Be careful not to reverse the connections.

Figure 3: Wiring diagram illustrating the connection order: Battery first, then Solar Panel, then Load.

Important: Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order: load, then solar panel, then battery.

5. אַפּערייטינג ינסטרוקטיאָנס

The controller features an intuitive LCD display and three control buttons for easy operation.

5.1 על-סי-די דיספּלעי אינפֿאָרמאַציע

The LCD screen provides real-time information about your solar system:

• VoltagE סימבאָל: ינדיקייץ דעם קראַנט וואָלtage.
• דיגיטאַל אַרויסווייַזן שטח: Shows numerical values for voltagע, קראַנט, טעמפּעראַטור, עטק.
• שעהן: Displays time-related settings or accumulated hours.
• Panels Icon: ווײַזט אויף זונ - פּאַנעל טעטיקייט.
• Charging Logo: Shows charging status (steady on for straight charge/lift charge, slow flash for float charge).
• Five Battery Level Mark: Visual representation of battery charge level.
• Load Identification: Indicates load status.
• Output Identification: Shows output status.

5.2 קנעפּל פאַנגקשאַנז

• מעניו שליסל: Used to cycle through display modes and enter/exit setting menus.
• אַרויף פייַל שליסל: Used to increase values or navigate upwards in menus.
• Down Arrow / Manual Key: Used to decrease values, navigate downwards in menus, or manually control the load output (when in manual mode).

5.3 באַשטעטיקן פּאַראַמעטערס

To adjust parameters like charge voltagE, אָפּזאָגן שנייַדן-אַוועק וואָלtage, or load control mode:

1. דרוק די מעניו שליסל צו אַרייַן די באַשטעטיקן מאָדע.
2. ניצן די אַרויף עראָו און אַראָפּ עראָו keys to navigate through the different parameters.
3. Once you've selected a parameter, press the מעניו שליסל again to make it blink, indicating it's ready for adjustment.
4. ניצן די אַרויף עראָו און אַראָפּ עראָו שליסלען צו טוישן די ווערט.
5. דרוק די מעניו שליסל once more to confirm the setting and save it.
6. פֿאַרלאָזט דעם סעטטינג מאָדע דורך דריקן די מעניו שליסל until the display returns to the main interface.

The controller also features light control and time control functions, allowing discharge to be controlled by sunlight and set time periods. Refer to the display icons for current status.

6. וישאַלט

רעגולערע וישאַלט גאַראַנטירט אָפּטימאַלע פאָרשטעלונג און לאָנדזשעוואַטי פון דיין זונ - טשאַרדזש קאָנטראָללער.

• דורכקוקן קאַנעקשאַנז: Periodically check all wire connections to ensure they are tight and free from corrosion. Loose connections can cause voltagע טראָפּנס און איבערהיצונג.
• רייניקן דעם קאָנטראָללער: Keep the controller clean and free from dust and debris. Use a dry cloth to wipe the surface. Do not use liquids or solvents.
• ווענטילאַטיאָן: Ensure the installation area remains well-ventilated to prevent overheating of the controller.
• באַטערי דורכקוק: Regularly check the battery terminals for corrosion and ensure the battery itself is in good condition.
• ינווייראַנמענאַל טנאָים: Avoid exposing the controller to extreme temperatures or excessive moisture.

7. טראָובלעשאָאָטינג

די סעקציע באהאנדלט אלגעמיינע פראבלעמען וואס איר קענט באגעגענען מיט אייער זונ - טשאַרדזש קאנטראלער.

אויב די פראבלעם בלייבט נאך פרובירן די לייזונגען, ביטע קאנטאקטירט קאסטומער סופארט.

8. ספּעסאַפאַקיישאַנז

Detailed technical specifications for the diymore 30A 12V/24V PWM Solar Charge Controller.

Figure 4: Product dimensions in millimeters and inches.

9. וואָראַנטי און שטיצן

Specific warranty details are not provided in the product information. For warranty claims or technical support, please contact the seller directly through your purchase platform. Ensure you have your purchase details and model number (DMXB0070-01) available when contacting support.