הקדמה
The Phanteks Eclipse G360A is a high-performance mid-tower gaming chassis designed for optimal airflow and component compatibility. It features an ultra-fine performance mesh front panel for superior cooling and dust filtration, integrated Digital-RGB lighting, and extensive support for modern gaming hardware including large GPUs and advanced liquid cooling solutions. This manual provides detailed instructions for setting up, operating, and maintaining your Eclipse G360A chassis.
סעטאַפּ און ינסטאַלירונג
1. אויספּאַקן און אינהאַלט
Carefully remove the chassis from its packaging. Verify that all components and accessories are present. The package should include the Eclipse G360A chassis, pre-installed 120mm D-RGB fans, and an accessory box containing screws, zip ties, and the user manual.
2. Component Compatibility
- מאָטהערבאָאַרד שטיצן: ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide).
- גפּו לענג: Up to 400 mm (15.7 in).
- קפּו קולער הייך: Up to 162 mm (6.3 in).
- PSU לענג: Up to 220 mm (280 mm depending on HDD cage location).
- סטאָרידזש: 2x 3.5" internal (included), 3x 2.5" internal (2 included).
פיגורע 1: אינערלעכער view highlighting 400mm GPU clearance, supporting high-end graphics cards.
Figure 2: Multiple storage options for 2.5" and 3.5" drives, with flexible mounting points.
3. ינסטאַלירונג סטעפּס
- צוגרייטן דעם שאַסי: Remove the tempered glass side panel by unscrewing the thumb screws. The front panel can be detached for easier fan/radiator installation.
Figure 3: Detachable front panel and fan bracket for simplified installation.
- ינסטאַלירן מאָטהערבאָאַרד: Secure your motherboard to the standoffs using the provided screws.
- אינסטאַלירן סטאָרידזש דרייווס: Mount 2.5" SSDs to the dedicated locations behind the motherboard tray or on the PSU shroud. Install 3.5" HDDs into the drive cages located under the PSU shroud.
- אינסטאַלירן מאַכט צושטעלן אַפּאַראַט (PSU): Slide the PSU into its designated compartment at the bottom rear of the chassis and secure it with screws.
- אינסטאַלירן גראַפיקס קאַרטל (GPU): Insert your graphics card into the PCIe slot on the motherboard. The chassis supports vertical GPU mounting with an optional bracket (PH-VGPUKT4.0_03).
- Install Cooling Components: The G360A supports various fan and radiator configurations.
- פאָכער שטיצן: Front: 3x 120mm (3 pre-installed) or 2x 140mm; Top: 3x 120mm or 2x 140mm; Rear: 1x 120mm.
- ראַדיאַטאָר שטיצן: Front: Up to 360mm or 280mm; Top: Up to 360mm; Rear: 120mm. Note: Front and top 360mm radiators cannot be installed simultaneously.
Figure 4: Detailed fan and radiator placement options for optimal cooling.
- קאַבלע פאַרוואַלטונג: Utilize the 36mm (1.4 in) cable management space behind the motherboard tray to route and secure cables for a clean build and improved airflow.
אַפּערייטינג ינסטראַקשאַנז
1. פראָנט I/O פּאַנעל פונקציעס
The front I/O panel provides convenient access to essential controls and ports:
- מאַכט קנעפּל: טורנס די סיסטעם אויף אָדער אַוועק.
- 2x USB 3.0 פּאָרטן: פֿאַר פֿאַרבינדן USB דעוויסעס.
- Microphone/Headphone Combo Jack: פֿאַר אַודיאָ אַרייַנגאַנג און אַרויסגאַנג.
- D-RGB Mode Button: Cycles through pre-programmed lighting effects.
- D-RGB Color Button: Changes the color of the D-RGB lighting.
Figure 5: Front I/O panel with easy-access controls for power, USB, audio, and D-RGB lighting.
2. Digital-RGB Lighting Control
The Eclipse G360A features integrated D-RGB lighting with pre-installed 120mm D-RGB fans and an LED strip along the tempered glass panel. The lighting can be controlled in two ways:
- מאַנואַל קאָנטראָל: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through various effects and colors without software.
- מוטערבאָרד סינקראָניזאַציע: The D-RGB controller can be connected to a compatible motherboard's D-RGB header (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, Razer Chroma). This allows for software control and synchronization with other D-RGB components in your system. Refer to your motherboard manual for D-RGB header location and software instructions.
Figure 6: Integrated D-RGB lighting and compatibility with major motherboard synchronization software.
וישאַלט
1. Cleaning the Ultra-fine Performance Mesh
The front panel's ultra-fine mesh acts as a dust filter. To maintain optimal airflow and prevent dust buildup, regularly clean the mesh:
- Gently detach the front panel.
- Use a soft brush or compressed air to remove accumulated dust from the mesh.
- Wipe the mesh with a slightly damp שטאָף אויב נייטיק, זיכער מאַכן אַז עס איז גאָר טרוקן איידער איר עס צוריק צוטשעפּען.
Figure 7: The ultra-fine performance mesh design, crucial for airflow and dust filtration.
2. General Chassis Cleaning
For general cleaning of the chassis exterior and interior:
- פאַרזיכערן אַז די סיסטעם איז פּאַוערד אַוועק און אַנפּלאַגד.
- Use a microfiber cloth to wipe down exterior surfaces.
- For interior dust, use compressed air to blow dust out of components and the chassis.
- Clean the tempered glass panel with a glass cleaner and a soft cloth.
טראָובלעשאָאָטינג
פּראָסט ישוז און סאַלושאַנז
| אַרויסגעבן | מעגלעך סיבה | לייזונג |
|---|---|---|
| סיסטעם טוט נישט מאַכט אויף. | Loose power connections, faulty PSU, incorrect front panel header connection. | Check all power cables (24-pin, 8-pin CPU, GPU). Verify front panel power switch connection to motherboard. Test PSU if possible. |
| D-RGB lighting not working or incorrect. | Loose D-RGB cable connection, incorrect D-RGB header, software conflict. | Ensure D-RGB cables are securely connected. If using motherboard sync, verify connection to a 3-pin 5V D-RGB header (not 4-pin 12V RGB). Try manual control via case buttons. Reinstall or update motherboard RGB software. |
| שלעכטע לופט שטראָם אדער הויכע טעמפּעראַטורן | Dust buildup, incorrect fan orientation, obstructed airflow. | Clean front mesh and other dust filters. Ensure fans are oriented correctly (intake/exhaust). Check for cable obstructions inside the case. |
| Front USB ports not functioning. | Loose USB 3.0 header cable connection to motherboard. | Verify the USB 3.0 cable from the front panel is securely connected to the motherboard's USB 3.0 header. |
ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל נאָמען | עקליפּסע ג360אַ |
| מאָדעל נומער | PH-EC360ATG_DBK02 |
| פאָרם פאַקטאָר | מיד טאַוער |
| דימענשאַנז (WxDxH) | 455 X 200 X 465 מם / 17.9 X 7.87 X 18.3 אינטשעס |
| מאַטעריאַל (s) | Steel Chassis, Tempered Glass |
| מאָטהערבאָאַרד סופּפּאָרט | ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide) |
| פראָנט איך / אָ | 2x USB 3.0, Microphone/Headphone Combo, Power Button, D-RGB Mode, D-RGB Color |
| יקספּאַנשאַן סלאָץ | 7 |
| Internal 3.5" Drive Bays | 2 (2x included) |
| Internal 2.5" Drive Bays | 3 (2x included) |
| פאַר-אינסטאַלירן פאַנס | 3x 120mm D-RGB (Front) |
| Fan Support (120mm) | Front: 3x; Top: 3x; Rear: 1x |
| Fan Support (140mm) | Front: 2x; Top: 2x |
| Radiator Support (120mm) | Front: Up to 360mm; Top: Up to 360mm; Rear: 120mm |
| Radiator Support (140mm) | Front: Up to 280mm; Top: Up to 360mm |
| מאַקסימום גפּו לענג | 400 מם / 15.7 אינטש |
| מאַקסימום קפּו קולער הייך | 162 מם / 6.3 אינטש |
| קאַבלע מאַנאַגעמענט ספעיס | 36 מם / 1.4 אינטש |
| מאַקסימום פּסו לענג | 220 mm / 280 mm (depends on HDD Cage location) |
וואָראַנטי און שטיצן
וואָראַנטי אינפֿאָרמאַציע
Phanteks products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Phanteks webפּלאַץ. די וואָראַנטי דעקט טיפּיש חסרונות אין מאַטעריאַלן און אַרבעט אונטער נאָרמאַל נוצן.
קונה שטיצן
Should you encounter any issues or have questions regarding your Phanteks Eclipse G360A chassis, please contact Phanteks customer support. You can find contact information, FAQs, and additional resources on the official Phanteks webפּלאַץ:
