דזשעגס 81603

JEGS 81603 Portable Parts Washer Cart Instruction Manual

מאָדעל: 81603

וויכטיק סאַפעטי אינפֿאָרמאַציע

Please read and understand all safety warnings and instructions before operating the JEGS 81603 Portable Parts Washer Cart. Failure to follow these instructions may result in serious injury or property damage.

  • Use only non-flammable, water-based degreasers or cleaning agents. Never use flammable solvents, gasoline, or other combustible liquids.
  • Fill the tank to just below the level of the parts tray to prevent overflow and ensure proper pump operation.
  • The lid is equipped with a fire protection fusible link that automatically closes in case of fire. Ensure the lid can close freely.
  • Always wear appropriate personal protective equipment, including safety glasses and chemical-resistant gloves, when operating the parts washer.
  • Ensure the unit is plugged into a properly grounded 110/120V outlet.
  • Keep the work area well-ventilated.
  • דו זאלסט נישט לאָזן די אַפּאַראַט אַנאַטענדיד בשעת אין אָפּעראַציע.
  • Keep children and unauthorized personnel away from the parts washer during use.

פּראָדוקט איבערview

The JEGS 81603 Portable Parts Washer Cart is designed for efficient and convenient cleaning of automotive parts and tools. Its mobile design allows for easy maneuverability in your garage or shop.

JEGS 81603 Portable Parts Washer Cart, front view מיט אַ דעקל עפענען

פראָנט view of the JEGS 81603 Portable Parts Washer Cart with the lid open, showing the internal components and flexible nozzle.

שליסל פֿעיִקייטן:

  • Large 20-gallon tank capacity with a 12-gallon solvent working capacity.
  • High-flow pump with a flexible wash nozzle for targeted cleaning.
  • Smooth-rolling 4-inch polyurethane casters (two locking, two non-locking) for easy mobility.
  • Convenient storage shelf to keep parts organized.
  • Drying shelf with a drain hole and a removable plastic drain pan.
  • Constructed from heavy-duty 20-gauge steel with a yellow powder-coat finish for corrosion resistance.
  • Integrated washer tank drain plug for easy fluid changes.
Parts washer tank showing internal tray in place and removed

Top-down view of the parts washer tank, illustrating the removable parts tray both in place and removed.

סעטאַפּ און אַסעמבלי

The JEGS 81603 Parts Washer Cart requires some assembly before first use. Refer to the detailed assembly instructions included in your product packaging for step-by-step guidance. Key steps typically include:

  1. Attach the casters to the base of the cart. Ensure locking casters are placed in desired positions.
  2. Assemble the cart frame and shelves according to the diagrams.
  3. Secure the parts washer tank onto the top of the cart frame.
  4. Connect the pump and flexible nozzle to the tank.
  5. Ensure all connections are secure and the power cord is properly routed.
זייַט view of parts washer cart showing power cord and on/off switch

זייַט view of the parts washer cart, highlighting the power cord and the easily accessible on/off switch for the pump.

אַפּערייטינג ינסטראַקשאַנז

1. פילונג די טאַנק

  • Ensure the unit is on a level surface and the drain plug is securely closed.
  • Pour approximately 12 gallons of a non-flammable, water-based degreaser or cleaning agent into the tank.
  • Do not overfill; the liquid level should be just below the parts tray to prevent splashing and ensure efficient pump operation.

2. Cleaning Parts

  • Place the parts to be cleaned onto the parts tray inside the tank.
  • Plug the parts washer into a 110/120V electrical outlet.
  • Turn on the pump using the power switch located on the side of the unit.
  • Direct the flexible wash nozzle towards the parts to spray the cleaning solution.
  • Use a brush (not included) to scrub stubborn grime while the solution is flowing.
  • Once cleaned, allow excess fluid to drain back into the tank. You can place parts on the drying shelf for further draining.
  • Turn off the pump when finished.
Close-up of flexible wash nozzle and pump filter inside the parts washer

נאָענט-אַרויף view of the flexible wash nozzle and the pump's filtration system within the parts washer tank.

וישאַלט

Regular maintenance ensures the longevity and optimal performance of your parts washer.

1. אויסליידיקן דעם טאנק

  • When the cleaning solution becomes excessively dirty or needs replacement, drain the tank.
  • Place a suitable container (e.g., a bucket) beneath the drain plug located at the bottom of the tank.
  • Unscrew the drain plug to allow the fluid to empty.
  • Dispose of used cleaning solution according to local environmental regulations.
  • Once drained, securely re-install the drain plug.
Close-up of the washer tank drain plug

נאָענט-אַרויף view of the washer tank drain plug, located at the bottom of the main tank for easy fluid removal.

2. רייניקן דעם אַפּאַראַט

  • Regularly clean the parts tray and the interior of the tank to remove sludge and debris.
  • The drying shelf features a removable plastic drain pan for easy cleaning. Remove the pan, empty any collected fluid, and wash it as needed.
  • Inspect the pump filter periodically and clean it to ensure unrestricted flow of the cleaning solution.
  • Wipe down the exterior of the cart with a damp cloth to maintain its yellow powder-coat finish.
Drying shelf with drain hole and removable drain pan

The drying shelf, showing its integrated drain hole and the removable plastic drain pan for convenient collection of excess fluid.

טראָובלעשאָאָטינג

If you encounter issues with your parts washer, refer to the following common troubleshooting tips:

  • פּאָמפּע אַרבעט נישט: Check if the unit is properly plugged into a live 110/120V outlet. Ensure the power switch is in the 'ON' position. Verify that the pump filter is not clogged.
  • Low fluid flow: Check the fluid level in the tank; ensure it is sufficient for the pump to operate. Inspect the pump filter and flexible nozzle for any blockages.
  • Excessive splashing: Ensure the tank is not overfilled. The fluid level should be just below the parts tray.
  • דעקל שליסט זיך נישט ריכטיג: Check for any obstructions around the lid hinges or the fusible link mechanism.

For persistent issues, contact JEGS customer support.

טעכניש ספּעסאַפאַקיישאַנז

באַשרייַבונגדעטאַל
מאָדעל נומער81603
טאַנק קאַפּאַסיטי20 גאלאנען
Solvent Working Capacity12 גאלאנען
Voltage110 וו / 60 הז
פּאָמפּע רעזולטאַט317 גף
אַסעמבאַלד דימענשאַנז (L x W x H)38 in. x 21 1/2 in. x 37 in.
טאַנק גרייס (L x B x H)28 אינטשעס x 19 אינטשעס x 8 1/2 אינטשעס
קאַסטערס(4) 4 in. diameter (2 locking, 2 non-locking)
מאַטעריאַלHeavy-duty 20-gauge steel, Polyurethane
קאָלירגעל
פּונקט וואָג71.5 lbs (product description) / 80 lbs (specifications)
ספּעציעלע שטריךפּאָרטאַטיוו

וואָראַנטי און קונה שטיצן

JEGS is committed to providing quality products and support.

  • קערט: This product is eligible for 30-day easy returns. Please refer to the retailer's return policy for details.
  • קונה שטיצן: For any questions, technical assistance, or warranty claims, please contact JEGS customer support directly. You can visit the JEGS Store on Amazon אדער זעט די קאָנטאַקט אינפֿאָרמאַציע וואָס איז צוגעשטעלט אין אייער פּראָדוקט פּאַקאַדזשינג.

פֿאַרבונדענע דאָקומענטן - 81603

Preview JEGS 81432 Transmission Tear-Down Table Installation Instructions
Detailed installation instructions for the JEGS 81432 Transmission Tear-Down Table, a 1/2-ton capacity workbench designed for automotive repair and maintenance. Includes parts list and step-by-step assembly guide.
Preview JEGS 86004 5250W פּאָרטאַטיווער גענעראַטאָר באַניצער גייד
באַניצער גייד פֿאַר די JEGS 86004 פּאָרטאַטיוו גענעראַטאָר. דעקט פֿאַרזאַמלונג, אָפּעראַציע, זיכערקייט, וישאַלט, און טראָובלעשווטינג פֿאַר די 5250 וואט מאַכט אַפּאַראַט.
Preview JEGS 555-630101 דיסק ברעיק קיט אינסטאַלירונג אינסטרוקציעס פֿאַר אימפּאַלאַ, בעל עיר, ביסקיין
א פולשטענדיגע אינסטאַלאַציע פירער פֿאַר די JEGS 555-630101 דיסק ברעיק קיט, דיזיינד פֿאַר שעווראָלעט אימפּאַלאַ, בעל עיר, און ביסקיין מאָדעלן. כולל טיילן רשימה, מכשירים פארלאנגט, שריט-פֿאַר-שריט אינסטרוקציעס, און טראָובלעשווטינג עצות פֿאַר אַפּגרעידינג דיין פאָרמיטל ס ברעיקינג סיסטעם.
Preview JEGS 5 אינטשעס טאַטשאָמעטער מיט שיפט ליכט ינסטאַלירונג גייד
אינסטאַלאַציע גייד פֿאַר JEGS 5-אינטש טאַטשאָמעטער מיט שיפט ליכט, וואָס דעקט וויירינג, סיגנאַל כאָוקאַפּ, קאַליבראַציע, און טראָובלעשווטינג פֿאַר אָטאַמאָטיוו נוצן. כולל מאָדעל נומערן 555-41260 ביז 555-41265.
Preview JEGS HEI סטריט ספּאַרק דיסטריביאַטאָר אַסעמבלי ינסטאַלירונג אינסטרוקציעס (555-40005)
דעטאַלירטע אינסטאַלאַציע גייד פֿאַר די JEGS HEI סטריט ספּאַרק דיסטריביאַטאָר אַסעמבלי, טייל נומער 555-40005. לערנט ווי צו אַראָפּנעמען דיין אַלטן דיסטריביאַטאָר, ינסטאַלירן די נייע JEGS אַפּאַראַט, פאַרבינדן וויירינג, און שטעלן די איגנישאַן טיימינג פֿאַר אָפּטימאַל פאָרשטעלונג.
Preview JEGS עלעקטרישע וואַקוום פּאָמפּע 555-63019 ינסטאַלירונג גייד
אינסטאַלאַציע גייד פֿאַר די JEGS עלעקטרישע וואַקוום פּאָמפּע (מאָדעל 555-63019). גיט אינסטרוקציעס וועגן ריכטיק מאָנטירן, וויירינג, זיכערהייט מיטלען, און אָפּעראַציאָנעלע הערות פֿאַר נוצן אין אַן אויטאָמאָביל.