הקדמה
This instruction manual provides detailed guidance for installing and operating your BRIKSMAX Led Lighting Kit, specifically designed for the Lego Home Alone Ideas 21330 building blocks model. This kit enhances the visual appeal of your Lego set by illuminating its various sections. Please read all instructions carefully before beginning installation.
Note: The Lego Home Alone Ideas 21330 building set is not included with this lighting kit.
פּעקל אינהאַלט
באַשטעטיקט אַז אַלע קאָמפּאָנענטן וואָס זענען אויסגערעכנט אונטן זענען פאַראַן אין אייער פּאַקעט. אויב עס פעלט אָדער זענען געשעדיגט, ביטע קאָנטאַקטירט קונה שטיצע.
Figure 1: Contents of the BRIKSMAX Led Lighting Kit.
- Dot Lights (various sizes and colors)
- Expansion Boards (4-port, 8-port, 12-port)
- Connecting Cables (various lengths)
- Battery Holders (AA battery holder, CR2032 battery holder)
- קלעפּיק סקווערז
- פּינצעט
- ינסטראַקשאַנז מאַנואַל
Batteries are not included. You will need 3 AA batteries for the main power and 4 CR2032 batteries for specific smaller light elements.
סעטאַפּ אינסטרוקציעס
Follow these steps to integrate the lighting kit with your Lego Home Alone Ideas 21330 set. Patience and careful handling of components are essential.
- צוגרייטונג: Ensure your Lego set is fully assembled according to its original instructions. Clear a well-lit workspace.
- Identify Light Placement: Refer to the included instruction manual for specific light placement within the Lego model. The manual provides visual guides for each step.
- Install Dot Lights: Carefully place the small dot lights into the designated areas. These often fit under or between Lego bricks.
- פאַרבינדן צו יקספּאַנשאַן באָרדז: Use the connecting cables to link the dot lights to the expansion boards. Ensure connections are secure but do not force them.
- רוט קאַבלעס: Route all cables neatly to minimize visibility and prevent pinching. Wires should be tucked into existing gaps or under bricks where possible. Avoid sharp bends or excessive tension on the wires.
- מאַכט קשר: Connect the expansion boards to the battery holders. Insert the required AA and CR2032 batteries into their respective holders.
- טעסט לייץ: Before fully reassembling any disassembled Lego sections, briefly test the lights to ensure all connections are working correctly.
- לעצט פֿאַרזאַמלונג: Carefully reassemble any Lego sections that were temporarily removed for light installation. Double-check that no wires are pinched during this process.
Video 1: A demonstration of the BRIKSMAX Led Lighting Kit installed on the Lego Home Alone set, showcasing the illuminated features and the modular design for easy access to interior sections.
אַפּערייטינג ינסטראַקשאַנז
Once installed, operating your BRIKSMAX Led Lighting Kit is straightforward.
- מאַכט אויף / אַוועק: Locate the battery holder(s) for your kit. There is typically an on/off switch on the battery box.
- ווייַט קאָנטראָל (אויב אָנווענדלעך): Some kits may include a remote control for adjusting light modes or brightness. Refer to the remote control's specific instructions for its functions.
Figure 2: The Lego Home Alone house illuminated by the BRIKSMAX lighting kit.
פיגורע 3: דעטאַילעד view of the illuminated front entrance.
Figure 4: Interior lighting detail of the Lego Home Alone house.
וישאַלט
To ensure the longevity and optimal performance of your lighting kit, consider the following maintenance tips:
- שטויב: Regularly dust your Lego set and lighting components with a soft, dry cloth or a soft brush to prevent dust buildup, which can affect light output.
- באַטערי פאַרבייַט: Replace batteries when lights dim or cease to function. Ensure correct battery type and polarity.
- קאַבלע דורכקוק: Periodically inspect cables for any signs of wear, damage, or pinching. Address any issues promptly to prevent short circuits or light failure.
- סטאָרידזש: If storing the Lego set with the lighting kit, ensure cables are not excessively bent or compressed. Store in a cool, dry place away from direct sunlight.
טראָובלעשאָאָטינג
If you encounter issues with your BRIKSMAX Led Lighting Kit, refer to the following common problems and solutions:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| לייץ טאָן ניט קער אויף. | 1. Batteries are dead or incorrectly inserted. 2. פרייַ קשר. 3. Damaged wire or component. | 1. Replace batteries and ensure correct polarity. 2. Check all cable connections to expansion boards and lights. 3. Inspect wires for visible damage. If a component is damaged, contact support. |
| עטלעכע ליכטער זענען שוואַך אָדער פליקערן. | 1. נידעריק באַטאַרייע מאַכט. 2. פרייַ קשר. 3. Wire partially pinched. | 1. פאַרבייַטן באַטעריז. 2. Re-secure connections. 3. Carefully inspect wire routing and adjust to relieve pressure. |
| Lights are not evenly distributed. | Incorrect light placement. | Refer to the instruction manual's visual guides and adjust light positions as needed. |
If these steps do not resolve your issue, please contact BRIKSMAX customer support for further assistance.
ווידעא 2: א קורצע איבערבליקview of the BRIKSMAX Led Lighting Kit for the Lego Home Alone 21330 set, demonstrating its compatibility and visual effect.
פּראָדוקט ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| פּראָדוקט דימענשאַנז | 8 X 6.1 X 2 אינטשעס |
| פּונקט וואָג | 8.2 אונסעס |
| נומער מאָדעל נומער | BX477 |
| פאַבריקאַנט רעקאַמענדיד עלטער | 8 יאר און העכער |
| קאַמפּאַטאַבילאַטי | Lego Home Alone Ideas 21330 Building Blocks Model |
וואָראַנטי און שטיצן
BRIKSMAX is committed to providing high-quality products and customer satisfaction. If you encounter any difficulties with your product or require assistance, please do not hesitate to contact us.
- קונה סערוויס: For support, please send us an email. We are always available to assist you.
- נאָך רעסורסן: Step-by-step video tutorials are available on YouTube to guide you through the installation process. זוכן פֿאַר "BRIKSMAX Lego Home Alone 21330 lighting kit installation" for relevant videos.
