1. הקדמה
This manual provides detailed instructions for the installation, operation, and maintenance of your Hertz SPL Show Series Bundle, which includes one pair of ST 25A NEO Compression Tweeters and one pair of SV 165 NEO 6.5" Midrange Drivers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to maximize the performance and longevity of your audio components.
2. זיכערקייַט אינפֿאָרמאַציע
שטענדיק אָבסערווירן די פאלגענדע זיכערקייַט פּריקאָשאַנז:
- פאַכמאַן ינסטאַלירונג רעקאַמענדיד: Due to the complexity of car audio systems, professional installation is highly recommended. Incorrect installation can lead to damage to the product, vehicle, or personal injury.
- מאַכט דיסקאַנעקשאַן: Before any installation or wiring, disconnect the vehicle's battery to prevent electrical shorts and damage.
- וויירינג: Ensure all wiring is correctly routed and secured to prevent pinching, chafing, or short circuits. Use appropriate gauge wire for power and speaker connections.
- ווענטילאַטיאָן: Ensure adequate ventilation around the speakers to prevent overheating, especially during prolonged high-power operation.
- באַנד לעוועלס: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Operate your audio system responsibly.
- ינווייראַנמענאַל טנאָים: While these components feature waterproofing and anti-UV treatment, avoid direct exposure to extreme elements where possible to extend product life.
3. פּעקל אינהאַלט
באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען פאַראַן אין אייער פּעקל:
- One Pair (2x) Hertz SPL Show Series ST 25A NEO 1" High Efficiency Compression Tweeters
- One Pair (2x) Hertz SPL Show Series SV 165 NEO 6.5" 4-Ohm SPL Midrange Speaker Drivers
- Installation Accessories (e.g., mounting hardware, wiring terminals - specific items may vary)
- באַניצער מאַנואַל (דעם דאָקומענט)

Image 3.1: Contents of the Hertz SPL Show Series Bundle, including two midrange drivers, two compression tweeters, a pry tool kit, and a coozy.
4. פּראָדוקט איבערview
4.1. Hertz SPL Show Series ST 25A NEO Compression Tweeters
The ST 25A NEO tweeters are designed for high-efficiency sound reproduction, featuring a powerful Neodymium magnet and a compact size. They are built for robust performance in demanding audio environments.
- נעאָדימיום מאַגנעט: Provides high performance in a compact form factor.
- FEM Optimized: Phase-plug and loading horn are optimized using Finite Element Method for acoustic precision.
- CCAR Voice Coil: Copper Clad Aluminium Ribbon voice coil offers high thermal and mechanical capability, with an easy replacement body kit.
- Aluminium Membrane: Extra-light design to maximize Sound Pressure Level (SPL).
- געווער: Features body waterproofing and anti-UV treatment for outdoor use without discoloration.

Image 4.1: A pair of Hertz SPL Show Series ST 25A NEO Compression Tweeters. These compact, black tweeters feature a horn-loaded design for high-frequency output.

בילד 4.2: א ווינקלדיקע view of a single Hertz SPL Show Series ST 25A NEO Compression Tweeter, highlighting its robust construction and horn design.
4.2. Hertz SPL Show Series SV 165 NEO 6.5" Midrange Drivers
The SV 165 NEO midrange drivers are engineered for powerful mid-frequency reproduction, utilizing Neodymium magnets for excellent performance in a compact and lightweight design. They are also built for durability in various environments.
- סאָליד און לייטווייט: Achieved through the use of Neodymium N38 H motor units, preserving performance.
- Waterproofing & Anti-UV: Cones are treated to allow safe outdoor use without discoloration.
- Oxidation Prevention: Motor units are treated with cataphoresis, and lead-wires are insulated.
- קאַמפּאַטאַבילאַטי: Terminals and mounting holes are designed for installation on Harley-Davidson motorbikes, indicating versatile mounting options.
- קאָנע מאַטעריאַל: Water-Repellent Pressed Paper.

Image 4.3: A pair of Hertz SPL Show Series SV 165 NEO 6.5-inch Midrange Drivers. These black speakers feature a central "SPL Show" logo and a durable cone.

בילד 4.4: א ווינקלדיקע view of a single Hertz SPL Show Series SV 165 NEO 6.5-inch Midrange Driver, showing the cone texture and mounting points.
5. אויפשטעלן און אינסטאַלירן
Proper installation is crucial for optimal performance and safety. It is highly recommended that installation be performed by a qualified professional.
5.1. פאַר-ינסטאַלירונג טשעקס
- פאָרמיטל קאַמפּאַטאַבילאַטי: Ensure the mounting locations in your vehicle can accommodate the dimensions of the SV 165 NEO (6.5") midrange drivers and ST 25A NEO tweeters.
- מאַכט רעקווירעמענץ: באַשטעטיקן דיין amplifier can safely power these components. Refer to the specifications section for power handling.
- מכשירים: Gather all necessary tools, including screwdrivers, wire strippers, crimpers, drill, and safety equipment.
5.2. מאַונטינג
Midrange Drivers (SV 165 NEO):
- Carefully remove existing speakers or prepare the mounting location.
- Ensure the mounting surface is flat and free of obstructions.
- Position the SV 165 NEO driver and mark the screw holes. Drill pilot holes if necessary, ensuring not to damage any vehicle wiring or components behind the panel.
- Secure the driver using the provided mounting screws. Do not overtighten.
Tweeters (ST 25A NEO):
- Choose a mounting location that allows for optimal sound dispersion and imaging, typically at ear level or slightly above.
- These tweeters can be flush-mounted or surface-mounted depending on the included accessories and desired aesthetic.
- Follow the specific instructions provided with the tweeter mounting hardware for precise installation.
5.3. וויירינג
General Wiring Guidelines:
- Always ensure the vehicle's battery is disconnected before making any electrical connections.
- Connect the positive (+) terminal of the speaker to the positive (+) output of the amplifier/crossover, and the negative (-) terminal to the negative (-) output.
- Use high-quality speaker wire of appropriate gauge to minimize power loss and ensure clear signal transmission.
- For the ST 25A NEO tweeters, a high-pass filter is required to protect them from low frequencies. The specifications indicate "Hi-pass filtered @ 5 kHz - 12 dB Oct." This means a crossover should be set to filter out frequencies below 5 kHz with a 12 dB per octave slope. Failure to use a proper high-pass filter will damage the tweeters.
- For the SV 165 NEO midrange drivers, a band-pass filter is typically used, allowing frequencies within their operational range (e.g., 150 Hz to 5 kHz) to pass through.
- Secure all wiring to prevent movement, chafing, and potential short circuits.
Warning: Incorrect wiring can damage the speakers and/or amplifier. Consult a professional if unsure.
6. אַפּערייטינג ינסטרוקטיאָנס
אַמאָל אינסטאַלירן, נאָכגיין די גיידליינז פֿאַר אָפּטימאַל אָפּעראַציע:
- ערשט מאַכט-אַרויף: After installation, reconnect the vehicle battery. Turn on your audio system at a low volume level.
- System Tuning: סטרויערן דיין amplifier's gain settings, crossover points, and equalization (EQ) to achieve balanced sound. Pay close attention to the crossover settings for the tweeters (high-pass at 5 kHz, 12 dB/oct) and midrange drivers.
- ברייק-אין צייט: Allow a break-in period of several hours of normal listening before operating the speakers at high volumes. This allows the speaker components to loosen and perform optimally.
- באַנד קאָנטראָל: Avoid operating the system at excessively high volumes for extended periods, as this can lead to speaker damage and hearing loss. If you hear distortion, reduce the volume immediately.
7. וישאַלט
These Hertz SPL Show Series components are designed for durability and require minimal maintenance:
- רייניקונג: Use a soft, dry cloth to gently wipe dust or dirt from the speaker cones and grilles. Avoid using harsh chemicals or abrasive cleaners.
- דורכקוק: Periodically check speaker connections for tightness and ensure no wires are frayed or exposed. Inspect mounting hardware for security.
- ענוויראָנמענטאַל שוץ: While treated for UV and water resistance, protecting the speakers from prolonged direct sunlight and extreme moisture will extend their lifespan and maintain aesthetic appearance.
8. טראָובלעשאָאָטינג
If you experience issues with your Hertz SPL Show Series components, refer to the following common problems and solutions:
8.1. No Sound from Speakers
- טשעק קאַנעקשאַנז: זיכער מאַכן אַז אַלע רעדנער דראָטן זענען זיכער פֿאַרבונדן צו ביידע די רעדנער און די amplifier/head unit. Verify correct polarity (+ to + and - to -).
- Ampליפֿער סטאַטוס: קוק אויב די ampדער ליפייער איז אנגעצינדן און נישט אין שוץ מאָדע.
- Source Unit: Confirm the head unit or source is powered on and playing audio.
- פוסעס: Check fuses in the amplifier and vehicle's fuse box.
8.2. Distorted or Unclear Sound
- באַנד מדרגה: רעדוצירט דעם קול. פארדרייאונג פאסירט אפט ווען די ampדער ליפפער אדער רעדנערס זענען איבערגעטריבן.
- געווינען סעטטינגס: סטרויערן די amplifier's gain settings. Too high a gain can cause clipping and distortion.
- קראָססאָווער סעטטינגס: Verify that the crossover frequencies are correctly set for both tweeters and midrange drivers as per specifications. Incorrect crossover settings can lead to distortion or damage.
- וויירינג: Check for loose or shorted speaker wires.
- רעדנער שעדיקן: Inspect speaker cones and surrounds for any visible damage.
8.3. One Speaker Not Working
- Individual Connections: Check the wiring for the specific non-working speaker.
- וואָג / פאַדער: Ensure the balance and fader settings on your head unit are centered.
- Amplifier Channel: If using a multi-channel amplifier, test the output of the specific channel connected to the non-working speaker.
If problems persist after troubleshooting, contact Hertz customer support or a qualified car audio technician.
9. ספּעסאַפאַקיישאַנז
9.1. Hertz SPL Show Series ST 25A NEO Compression Tweeters (Pair)
| שטריך | באַשרייַבונג |
|---|---|
| גרייס | 44 מם (1.8 אינטשעס) |
| Power Handling - Peak | 100 W (Hi-pass filtered @ 5 kHz - 12 dB Oct.) |
| ימפּידאַנס | 4 Ω |
| אָפטקייַט ענטפער | 3 kHz ÷ 20 kHz |
| סענסיטיוויטי | 107 דב ספּל |
| קול שפּול Ø | 25 מם (1 אינטש) |
| מאַגנעט מאַטעריאַל | נעאָדימיום |
| שישקע מאַטעריאַל | אַלומינום |
| קול שפּול מאַטעריאַל | CCAR (Copper Clad Aluminium Ribbon) |
| ספּעציעלע פֿעיִקייטן | FEM optimized phase-plug and loading horn, Body waterproofing and anti-UV treatment |
9.2. Hertz SPL Show Series SV 165 NEO 6.5" Midrange Speaker Drivers (Pair)
| שטריך | באַשרייַבונג |
|---|---|
| גרייס | 165 מם (6.5 אינטשעס) |
| ימפּידאַנס | 4 Ω |
| מאַגנעט מאַטעריאַל | Neodymium N38 H |
| שישקע מאַטעריאַל | Water-Repellent Pressed Paper |
| ספּעציעלע פֿעיִקייטן | Cones waterproofing and anti-UV treatment, Motor units treated with cataphoresis, Insulated lead-wires, Compatible for Harley-Davidson motorbikes installation |
9.3. אַלגעמיינע פּראָדוקט ספּעציפֿיקאַציעס
| שטריך | באַשרייַבונג |
|---|---|
| פּונקט וואָג | 3 פונט |
| פּעקל דימענשאַנז | 19 X 15 X 9 אינטשעס |
| מאָדעל נומער | HertzBDL210910-06 |
| ASIN | B09G79LN28 |
| פאַבריקאַנט | הערץ |
| ערשטער דאַטע בנימצא | 14 סעפטעמבער 2021 |
10. וואָראַנטי & שטיצן
וואָראַנטי אינפֿאָרמאַציע:
This Hertz SPL Show Series Bundle is covered by a 1-יאָר מאַנופאַקטורער וואָראַנטידי וואָראַנטי דעקט טיפּיש חסרונות אין מאַטעריאַלן און אַרבעט אונטער נאָרמאַל נוצן. ביטע האַלטן דיין קויפן באַווייַז פֿאַר וואָראַנטי קליימז.
קונה שטיצן:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Hertz customer support directly. Refer to the official Hertz webוועבזייטל אדער אייער קויפן דאקומענטאציע פאר קאנטאקט דעטאלן.
אָנליין רעסורסן:
Additional information, FAQs, and product registration may be available on the official Hertz Brand Store אדער זייער קאָרפּאָראַציע webפּלאַץ.





