Okin Touch Sensor Control Box Set Instruction Manual

1. פּראָדוקט איבערview

This Okin Touch Sensor Control Box Set is a replacement component designed for single-motor electric furniture, including lift chairs, electric recliners, and power supply sofas. It is compatible with various brands such as Limoss, Okin, and Kaidi. This set provides the necessary control for one actuator/motor, featuring a 5-pin round plug for connection.

Figure 1: Complete Okin Touch Sensor Control Box Set, showing the control box, wiring, and two touch sensors.

2. זיכערקייַט אינפֿאָרמאַציע

• דעם פּראָדוקט איז דיזיינד פֿאַר דרינענדיק נוצן בלויז.
• The control box has a water resistance rating of IP20. Electronic components must not be exposed to water or wet conditions.
• When assembling the black and white lead wires, ensure they are not twisted together.
• האַלטן אַ מינימום ווייַטקייט פון 100mm (approximately 4 inches) when routing wires inside the sofa armrest to prevent interference.
• Exercise caution with SM connectors, as they feature a locking structure. Always ensure the correct connection between female and male connectors. To disconnect, first loosen the locking bar before pulling the connectors apart.

3. פּראָדוקט ספּעסאַפאַקיישאַנז

4. פּעקל אינהאַלט

The Okin Touch Sensor Control Box Set includes the following components:

• 1 × Control Box
• 1 × Cable with 5-pin round plug
• Black and White Lead Wires
• 2 × Touch Sensors

Figure 2: Detail of the two touch sensors and their associated black and white lead wires.

5. ינסטאַלירונג גיידליינז

Follow these steps for proper installation of the Okin Touch Sensor Control Box Set:

1. באַשטעטיקן קאַמפּאַטאַבילאַטי: Before beginning installation, confirm that your electric furniture uses a single motor and is from a compatible brand (e.g., Limoss, Okin, Kaidi). This set is not suitable for reclining chairs with control motors.
2. Identify Model Number: Locate the model number on your existing control box or motor to ensure it matches the JLDK.08.01.00-D1 model.
   

   פיגורע 3: עקסample of a product label, highlighting the model number for verification.

3. דיסקאַנעקט מאַכט: Always unplug the furniture from the power outlet before attempting any installation or replacement.
4. אַראָפּנעמען אַלטע קאָמפּאָנענטן: Carefully disconnect and remove the existing touch sensor and control box components from your furniture. Note the routing of wires for easier installation of the new set.
5. קאָנעקט קאָנטראָל קעסטל: Connect the 5-pin round plug from the new control box to the corresponding port on your furniture's motor. Ensure the connection is secure.
   

   Figure 4: Detail of the 5-pin round plug, which connects to the motor.
6. Connect Touch Sensors: Connect the black and white lead wires from the touch sensors to the control box. It is crucial that these wires are connected correctly and not twisted together to ensure proper polarity and function.
7. ווירע מאַנאַגעמענט: When routing the wires inside the sofa armrest or furniture frame, maintain a minimum distance of 100mm (approximately 4 inches) between the touch buttons and other wires. This helps prevent signal interference.
8. זיכער קאַמפּאָונאַנץ: Secure the new control box and touch sensors in their designated locations within the furniture. The control box is constructed with high-strength ABS plastic for durability.
9. רעקאָננעקט מאַכט: Once all connections are secure and components are properly mounted, plug the furniture back into the power outlet.

6. אַפּערייטינג ינסטרוקטיאָנס

After successful installation, the Okin Touch Sensor Control Box Set enables the operation of your single-motor electric furniture.

• פאַנגקשאַנאַליטי: The touch sensors will now control the movement of the furniture's actuator/motor, allowing for reclining or lifting functions as designed by your furniture.
• באַניץ: Gently press the touch sensors to activate the motor and adjust the furniture's position. Release the sensor to stop movement.

7. וישאַלט

To ensure the longevity and proper functioning of your Okin Touch Sensor Control Box Set, follow these simple maintenance guidelines:

• רייניקונג: Wipe clean the control box and touch sensors with a dry, soft cloth. Do not use liquid cleaners or immerse any part of the product in water.
• סוויווע: Always ensure the product is used in an indoor, dry environment. Avoid exposure to moisture, excessive heat, or direct sunlight.
• קאַבלע דורכקוק: Periodically inspect all cables and connections for any signs of wear, damage, or loose connections. Address any issues promptly.

8. טראָובלעשאָאָטינג

If you encounter issues with your Okin Touch Sensor Control Box Set, consider the following troubleshooting steps:

If troubleshooting steps do not resolve the issue, please contact Okin customer service for further assistance.

9. Customer Service & Support

Okin is committed to providing excellent customer service. If you have any questions, require technical support, or need assistance with your product, please do not hesitate to contact us.

Our dedicated team is available to ensure prompt problem-solving and customer satisfaction.

For more information about Okin products and support, you may visit the official Okin store on Amazon: Okin Store.