Thermalright AXP90 X36 Low Profile ITX CPU Cooler Instruction Manual

1. הקדמה

The Thermalright AXP90 X36 is a compact, low-profile CPU cooler designed for ITX systems and other small form factor builds where space is limited. With a total height of 36mm, it features a TL-9015 slim PWM CPU fan and 4x6mm AGHP heatpipes to provide efficient cooling performance. This manual provides detailed instructions for installation, operation, and maintenance of your AXP90 X36 cooler.

שליסל פֿעיִקייטן:

• Compact, premium-quality low-profile CPU cooler (36mm total height).
• Good adaptability, all metal platform, with back plate fastener, secondary reflow soldering process.
• Nickel plating process, corrosion resistance, acid and alkali resistance, low thermal resistance.
• 4x6mm AGHP Heatpipes, Noise≤22.4DBA, Voltage 12V, Current 0.2A (MAX).
• Support for Intel: 115X/1200/1700/1851; AMD: AM4/AM5.

2. פּראָדוקט ספּעסאַפאַקיישאַנז

3. ינסטאַללאַטיאָן גייד

Please refer to the following steps for proper installation of your Thermalright AXP90 X36 CPU Cooler. Ensure your system is powered off and unplugged before beginning installation.

אַלגעמיינע צוגרייטונג:

1. Carefully unpack all components and verify against the package contents.
2. Remove the protective plastic sticker from the heatsink base before applying thermal compound.

AMD AM4/AM5 Installation:

1. Remove the existing plastic brackets from your AM4/AM5 motherboard by unscrewing them.
2. Remove the original AM4/AM5 backplate from the backside of the motherboard.
3. Apply thermal compound evenly onto the CPU surface.
4. Install the provided AM4/AM5 backplate on the backside of the motherboard, ensuring the 'AM4' text faces outwards.
5. Place the heatsink onto the CPU, aligning the motherboard mounting holes with the screws on the heatsink.
6. Secure the heatsink and backplate using the four hex nuts. Tighten them evenly in a cross pattern until snug.
7. Connect the fan header to the CPU_FAN socket on the motherboard.

Intel LGA115X/1200/1700/1851 Installation:

1. Remove the pre-installed brackets for Intel motherboards from the heatsink by unscrewing them.
2. Install the appropriate brackets for your Intel motherboard onto the heatsink. Ensure the logo on the brackets faces towards the heatsink.
3. Install the four short screws into the heatsink brackets.
4. Apply thermal compound evenly onto the CPU surface.
5. Install the Intel backplate (if provided and required by your motherboard) on the backside of the motherboard.
6. Place the heatsink onto the CPU, aligning the motherboard mounting holes with the screws on the heatsink.
7. Secure the heatsink and backplate using the four hex nuts. Tighten them evenly in a cross pattern until snug.
8. Connect the fan header to the CPU_FAN socket on the motherboard.

Installation Video Tutorial:

Watch the official installation video for a visual guide on setting up your Thermalright AXP90 X36 CPU Cooler, specifically demonstrating the process for AMD AM4 motherboards.

וויכטיק הערות:

• Ensure all screws are tightened evenly to prevent uneven pressure on the CPU.
• In case of motherboard components conflicting with the backplate, replace the short screws on the heatsink with the longer screws provided in the package to ensure proper clearance and secure mounting.

4. אַפּערייטינג ינסטרוקטיאָנס

Once installed, the Thermalright AXP90 X36 CPU Cooler operates automatically based on your motherboard's fan control settings. The TL-9015 PWM fan adjusts its speed according to the CPU temperature, providing optimal cooling while minimizing noise.

• בייאָס/UEFI סעטטינגס: Access your motherboard's BIOS/UEFI settings to configure fan curves if you desire custom fan speed control.
• טעמפּעראַטור מאָניטאָרינג: Use system monitoring software to keep track of your CPU temperatures to ensure optimal performance and prevent overheating.
• לופט לויפן: Ensure adequate airflow within your PC case to maximize the cooler's efficiency.

5. וישאַלט

רעגולערע אויפהאלטונג העלפט זיכער מאכן די לאנגעוויטי און אפטימאלע פערפארמאנס פון אייער קפידו קולער.

• שטויב רייניקונג: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Ensure the fan is held stationary during cleaning to prevent damage to the bearings.
• טערמישע פּאַסטע: Reapply thermal paste every 1-2 years, or if you remove the cooler for any reason, to maintain efficient heat transfer between the CPU and the heatsink.
• פאָכער דורכקוק: Check the fan for any signs of wear, unusual noises, or reduced performance. Replace the fan if necessary.

6. טראָובלעשאָאָטינג

If you encounter issues with your CPU cooler, consider the following troubleshooting steps:

• הויכע CPU טעמפּעראַטורן:
  • Verify that the cooler is securely mounted and making good contact with the CPU.
  • קוקט איבער צי די טערמישע פּאַסטע איז ריכטיק געווענדט געוואָרן און צי זי איז נישט אויסגעטריקנט.
  • Ensure the fan is spinning and not obstructed.
  • Improve case airflow by adding or repositioning case fans.
• Fan Not Spinning/Making Noise:
  • Check the fan's connection to the CPU_FAN header on the motherboard.
  • Inspect the fan for any physical obstructions or damage.
  • Adjust fan speed settings in BIOS/UEFI.
• אינסטאַלאַציע שוועריקייטן:
  • Refer to the installation video and step-by-step guide carefully.
  • Ensure you are using the correct mounting hardware for your CPU socket (Intel vs. AMD).
  • If the backplate conflicts with motherboard components, use the longer screws provided.

7. וואָראַנטי און שטיצן

Thermalright products are designed for reliability and performance. For warranty information, technical support, or any other inquiries, please visit the official Thermalright webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך.

פאַבריקאַנט: טערמאַל רעכט

מאָדעל: AXP90 X36

ASIN: B097DTVFQQ

GTIN/UPC: 742346951874